|
| 1 | Sch \"A\" Part-I (B/R Work)Excavation in trenches is soft/loose soil n.exc 1.50 mtrs wide and n.exc 1.50 in depth and getting out complete all as specified and directed. |
| 2 | M & L PCC (1:4:8) type D2(using 40 mm graded stone aggregates) as in foundation, filling andmass concrete complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L Sand filling under floors or in foundations including watering and consolidation Spreading and levelling in layers n exc. 25 cm thick complete all as directed |
| 6 | Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed. |
| 7 | Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed. |
| 8 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs , etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed. |
| 9 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200 mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed. |
| 10 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete complete all as specified and directed. |
| 11 | M&L RCC M-25 using 20 mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 12 | M&L RCC M-25 using 20 mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 13 | M&L RCC M-25 using 20 mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 14 | M&L RCC M-25 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 15 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 16 | M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 17 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 18 | Brick work, with sub class \"B\" old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 etc complete all as specified and directed. |
| 19 | Brick work, with sub class \"B\" old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 etcas half thick brick wall complete all as specified and directed. |
| 20 | Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cementall as specified. |
| 21 | Rendering 10 mm thick in cement mortar 1:6 , on brick or concrete surfaces of wall, trowelled to even and smooth finish without using extra cement complete all as specified. |
| 22 | Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces of wall, trowelled to even and smooth finish without using extra cement with WPC paid and measered separetly complete all as specified. |
| 23 | M&L for preparation of existingsurfaces/newly plastered surfaces of walls/soffits/chajja/facia etc and applying two coat of weather proof exterior grade paint on walls over a coat of wall care white putty thicknes not less than 2mm and sand papering surfaces to achieve smooth surfaces including complete removal of surfaces with mechanical means/sand paper complete all as specified and directed. |
| 24 | Material and labour for preparation ofnew surfaces of walls/ ceiling and applying wall carewhite putty thickness not less than 2mmand sand papering surfaces to achieve smooth surfaces and applyingtwo coats of acrylic based internal distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified. |
| 25 | Providing and laying3mm thick APP (Atactic Polyproplene Polymer) modifiedprefabricated five layer, weightnot less than 4.0 Kg/Sqm water proofingmembrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the samemembrane manufacturer ofdensity 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling alljoints etc after the surface complete as per standard practice as per manufacturers instructions.The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms(ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/.Softening point of membrane not less than 150 degreeC Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) Thelaying of membrane shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed.Make : Sika/STP/Fosroc |
| 26 | Providing and fixing factory made extruded aluminium ventilator with 50 micron powder coating of frame63.5X38.10x1.29 mm including 5mm thick frosted glass in lower 55% portion of shutter and stainless steel wire gauge 0.36mm dia and 1.40 aperature in upper 45% portion of shutter and to be fixed with and includingEPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with andcomplete fixed in all respect as specified |
| 27 | S&F powder coated 50 micron extrded aluminium doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3x44.45x1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail,and 5mm thick frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete all as specified and directed including supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -3 nos per leaf(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 28 | Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match and icluding over 15 mm thick screeding in CM 1:4 complete all as specified |
| 29 | Material and labour for Ist quality Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/ 600 x 300 x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match andover and including 10 mm thick rendering in CM 1:4 complete all as specified. |
| 30 | S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified. |
| 31 | S&F 20mm dia Unplasticised PVCpipes of pressurerating 10 kgf/cm2fixed complete towalls, ceilings or infloors etc., any typeof pipe complete all as specified. |
| 32 | S&F Bib taps, suitable for 15 mm bore , as in repair cast copper alloy chromium plated fancy type with crutchor butterfly handle screwed down screwed for iron pipe long body and fixed complete all as specified and directed. |
| 33 | S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 34 | S&F for 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screw shanks screwed for iron pipe or union complete. |
| 35 | S&F Vitreous china wash hand basin white flat back size 550 x 400mm including 32mm CP brass waste fitting, 45 cm long PVC connection with brass nut at both ends,40mm dia PVC west pipe cast iron brackets and making good disturbed surfaces in CM 1:3 or PCC 1:2:4 as directed. |
| 36 | S&F towel rail CP brass 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. |
| 37 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete fixed in position all as specified and directed. |
| 38 | S&F soap dish,stainless steel of suitable size to accommodate soap , tooth brush glass and tooth paste complete all as directed and specified. |
| 39 | M&L Vitreous China wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe and to flushing pipe, anti-syphonage pipe incl seat cover etc. fixed in repairs complete all as specified and directed. |
| 40 | Supply and fixed in repairs, vitreous china, (1st quality) WHITE Squatting pan ,\"Orissa\" pattern size 580 mm x 440mm with integral footrests water closet) with \"P\" or \"S\" trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified |
| 41 | S&F in repair 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white incl ball valve flat and handle incl brackets flush pipe of polyethylene low or high density of PVC 32 mm dia and PVC connectionall as specified |
| 42 | S&F in repair A Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 43 | S&F PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified. |
| 44 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 45 | Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type \"P\" or \"S\" incl CI grating fixed in repair complete all as directed and specified. |
| 46 | M&L cast iron nahani/floor/multifloor trap 100 mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1complete all as specified and directed. |
| 47 | S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls/laid in floors and making necessary connections, fixed as in repair complete all as specified and directed. |
| 48 | S&F CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified. |
| 49 | S&F cast iron junction combination \"T\" equal or unequal for 100mm bore with access door as in repair complete all as specified. |
| 50 | M&L for cast iron cowls of 100 mm dia complete all as specified and directed. |
| 51 | S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified. |
| 52 | M&L for PCC M-15 (Nominal mix) type B-0 1:2:4 (Using 12.5mm graded stone agg) as inplinth protection, sub base etc. including necessary formworkcomplete all as specified. |
| 53 | Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed. |
| 54 | M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces |
| 55 | Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete external surfaces of walls, trowelled to even and smooth finish without using extra cement with WPC paid and measered separetly complete all as specified. |
| 56 | M&L PCC in benching in manholes, surface channelsdrains type B1 (1:2:4) using 20 mm graded stone aggregate |
| 57 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. |
| 58 | M&L PCC in coping, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating,including necessary form workas directed type B1 (1:2:4) using 20 mm graded aggregate |
| 59 | Supply only WPC by wight 3%. |
| 60 | M&L Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) |
| 61 | M&L Slat-glazed stoneware drain pipes laid in trenches & jointed as specfified of 150mm dia |
| 62 | Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required |
| 63 | Sch \"A\" Part -II (E/M Works)Material and Labour for Modular concealed point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through with newPVC concealed/conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) including fixing of switch/socket/regulator/ etc complete all as specified and as directeda) For one light /fan/ buzzer point controlled by one 5 Amp switch one way |
| 64 | b).For one three pin socket outlet 5 Amps independent board complete |
| 65 | c) For one three pin 5 Amps socket outlet on the same board with other switches |
| 66 | All as per item No 62 here-in-abovebut with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi conductor connecting to common earth dolly complete. |
| 67 | S & F Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge. |
| 68 | S & F Modular socket 6 Amp 2/3 pin combined 2 modulecomplete all as specified and directed by Engr-in-Charge. |
| 69 | S & F Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed by Engr-in-Charge |
| 70 | S & F Modular socket 6 /16 Amp 2/3 pin combined 2 modulecomplete all as specified and directed by Engr-in-Charge. |
| 71 | Supply and fixing ceiling rose 65X50 mmthree terminals complete all as specified. |
| 72 | S&F Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge. |
| 73 | Supply and fixing in replacement Distribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coatingsurface mounting SPN 4way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) |
| 74 | Supply and fixing in replacement MCB single pole 6 to 32 Amps all as specified and directed. |
| 75 | Supply and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed |
| 76 | S & F in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn inexisting non metalic PVC rigid conduit medium grade of suitable size with all standared fitting ,including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.Note: 1 two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/one running meter |
| 77 | Supply and fix, Fresh Airfan of size 350mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3\" long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connectioncomplete all as specified and directed.Note : Making suitable opening for fixing exhaust fan shall be deemed included in the quoted rate of item |
| 78 | Supply and fix in replacement LED tube light 20 watt, (4\" long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed. |
| 79 | Supplying,fixing,connecting & testing of Gi pipe steel tubing 40mm bore medium grade,ISI marked including all fitting and fixtures laid in trnches,under floor,Fixed to wall etc complete all as specified & directed by Engr-in -charge.(a) Excavation and earth work will be measured seperately.NOTE; ALL FITTING ,ACCESORIES,ELBOW ,UNION,SOCKET& FIXTURES ARE INCLUDED IN SAME ITEM ONLY. |
| 80 | Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, Heavy dutyCable with PVC insulated Aluminium Stranded Conductor Served with an Inner Sheathing of PVC Tape Armoured with Galvanised Steel Wire or Tape and Overall PVC Sheathed, Nominal Cross Section 10 Sqmm, 2 Core in Service Connections, complete all as specified and as directed. |
