|
| 1 | ELECTRICAL WORK |
| 2 | Supplying, installtion, testing and commissioning of Wireless access point supporting concurrent dual band with 802.11a/n/ac (5 GHz) and 802.11g/n (2.4GHz) concurrent operation with MIMO support 2x2, One 10/100/1000 BASE-TX auto-sensing (RJ45) PoE port, with USB Port |
| 3 | Providing and FIXING erecting XLPE(IS:7098) (I)-88 ISI armoured cable multi strand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench/pipe at road crossing or floor of following size of cable. (a) 4 core 16 sq mm |
| 4 | FURNITURE WORK |
| 5 | Providing & fixing of Fire Rated 40mm thick flush doors single leaf shutter made out of perimeter railing of Hard Wood as per fire rating specification of size 100mm x 22mm and infill of ceramic blanket (fire rated cloth) faced with 0.25mm thick face veneer & 2.5 mm thick 4 layers of core veneer. The fire Doors shall be as per IS: 5509-2000 with 60 minutes fire rating duly tested for Integrity & Insulation Criteria as per the IS 5509 with standard heating conditions as specified in IS:3809 - 1979 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temperature rise on the non-fire side to the maximum of 140 degree Centigrade above the ambient temperature on the unexposed surface of the shutter), with required cutting & modification works including fixing of 4 mm thick veneer of approved shade as per given drawings including melamine polish complete in all respect to the entire satisfaction of Engineer in- Charge. The rate also include door frame made of MR grade plywood with veneer finish and melamine polish complete in all respect. - Door shutter will be Fire rated with 60 minutes rating alongwith the test certificate. - Door Hardware shall be paid for separately . (Doors should be manufactured from NCBN \"Non-combustible By Nature\" Technology and confirm to National and International norms and standards like IS, BS, AS, ASTM and DIN in 60 minutes Fire rating in |
| 6 | Providing & fixing of plywood pelmet 400mm to 600mm as per detailed drawings. The pelmet made out 19mm thick MR grade plywood with required cutting & modification works, proper in line & level including fixing of 04mm thick veneer of approved shade polish on outer sides. (Basic rate of veneer Rs. 100/- per SFt) with pasting of edge band/veneer paper as per approved shade with The entire work to be completed as per detailed drawings and design or as directed by the Architect or Engineer-in-Charge. |
| 7 | Providing and fixing of Pergo 8mm thick AC-4( average 4550 cycles) Domestic Extra series Laminate wooden flooring with Titan X Coating, impact resistance 9N, and resistance to cigarette burn with a rating of 4 (EN 438-2.05) material should be installed on Pergo combi foam and polythenecomplete as directed by the Engineer in-charge. |
| 8 | Providing and fixing of pergo laminate Wooden Flooring Skirting and beading Patti as per manufacturer\"s specifications and to the entire satisfaction of Engineer-in- Charge. |
| 9 | Providing & Fixing of Corner L Type SS Patti As per Instruction of Engineer In-charge. |
| 10 | Providing and Fixing Pantry Counter made with BWP 19mm plywood with open able shutter &Drawer internal and external surface finish in approved shade Laminate work done with all necessary hardware like; nails,screw,adhesive,tools and tackle as per details DWG &instruction of Engineer In-charge. |
| 11 | Providing and supplying Exhaust SS Jali as per details DWG 150mm X 150mm as perinstruction of Engineer In-charge. |
| 12 | Providing and fixing Desgin False ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sq.Mt.t. (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffuser, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :(12.5 mm thick tapered edge gypsum moisture resistant board) |
| 13 | Providing & Fixing of VANITY COUNTER as per Detail Drawings.The VANITY COUNTER made out From 19mm/12mm/06mm Thick MR Grade Plywood With Required Cutting & Modification Work proper in Line Level with Inside Fixing of 0.7mm thick Laminate (Basic Rate of Laminate 425/- Rs per Sheet) with Outside Fixing of 04mm Thick Approved Shade Veneer Finish (Basic Rate of Veneer 85/- Rs per Sq.Ft) with Edge Side Pasting of PVC Edge band/Veneer Paper as per approved shade or matching with Veneer (+/-) with Applying of Approved shade Melamine (matt/Glossy) polish on Veneer. The VANITY COUNTERs Will having Openable Shutter (Soft Close Auto Hinges) with Fixing of 2 Drawer (Soft Close Telescopic Chanel), Shelves with Fitting of Required hardware, material & labour etc Work Completed as per detail Drawings. - Size: L 1200mm x D 540mm - Marble on top |
| 14 | Vanity Mirror: Providing and fixing in position of removable 6mm thick mirrorfor vanity counter, fixed on 12mm thick BWP ply fixed on aluminium framework of required section and thickness. Mirror to have frosted slit at vertical light coves. Vanity mirror to have Cost to include necessary frame work to achieve required profile including protective coating to mirror back, anti mist defogger, edge polishing, fixing mirror with clip system, silicon sealant, making provision for light fixtures, all consumables, necessary fixing arrangement etc. complete as per detail drawing, specification and as directed by Project Manager. |
| 15 | Corner Table 600mm Dia: Providing and supplying corner Table Made CNC Wooden Base Round shape Top veneer finish all wooden surface finish in approved shade polish as per details DWG. |
| 16 | Reception Area.&DINING AREA GROUND FLOOR. |
| 17 | Providing and fixing Roller Blind as per details DWG or site engineer instruction. |
| 18 | Providing& fixing of DOUBLE bed (without storage) with headboard as per detailed drawings and design:The bed made out from MR grade plywood with required cutting & modification work proper in Line and Level with fixing of 0.7mm thick laminate on inner side. (Basic rate of laminate Rs. 425/- per sheet) with fixing of 04mm thick approved shade veneer on outer side. (Basic rate of veneer Rs. 85/-per SFt) or fixing of approved shade of fabric on bed (Basic rate of Fabric Rs. 950/-per Mtr) with edge side pasting of PVC and as per approved shade or matching with laminate.The Headboard made out from 08mm/12mm hick plywood with fixing of approved shade Fabric (Basic rate of Fabric Rs.950/-per Mtr) with required stitching work with fitting of required hardware, material & labour etc. work completed as per detaileded drawings.- BedSize: 1800mm x 2000mm with head board |
| 19 | Providing& fixing of bed side table for Deluxe Rooms as per detailed drawings.The bed side table made out From MR grade plywood with required cutting & modification work proper in Line Level with inside fixing of 0.7mm thick laminate (Basic rate of laminate Rs.425/- per Sheet) with outside fixing of 04mm thick approved Shade veneer finish (Basic rate of veneer Rs. 85/- per Sq.Ft) with applying of approved shade melamine polish on veneer.The side table`s will having one drawer unit (soft close telescopic channel) with bottom side fixing of 75mm height skirting and above side table fixing of 12mm thick plywood Panelling (150mm x 500mm) with veneer finish with fitting of required hardware, material & labour etc work completed as per detailed drawings.Legs of table are considered powder coating/Ionised.- Size of side Table: L 500mm x D 450mm x H 525mm |
| 20 | Providing & fixing of wardrobe as per detailed drawings.The wardrobe made out From 19mm/12mm/06mm thick BWP 710 grade plywood with required cutting & modification work proper in Line Level with inside outside fixing of 04mm thick approved Shade veneer finish (Basic rate of veneer Rs. 100/- per Sq.Ft) with Edge side Pasting veneer Paper as per approved shade or matching with veneer (+/-) with applying of approved shade PU (matt/glossy) polish on veneer. The wardrobe`s will having Openable Shutter (Soft Close Auto Hinges) with inside fixing of 2 Tray & one drawer (soft close telescopic channel), Shelves with fitting of required hardware, material & lobour etc work completed as per detailed drawings. |
| 21 | Providing & fixing of MINIBAR for Deluxe Rooms as per detailed drawings.The MINIBAR made out From 19mm/12mm/06mm thick MR grade plywood with required cutting & modification work proper in Line Level with inside fixing of 0.7mm thick laminate (Basic rate of laminate Rs.425/-per Sheet) with outside fixing of 04mm thick approved Shade veneer finish (Basic rate of veneer Rs. 85/- per Sq.Ft) with Edge side Pasting of PVC Edge band/veneer Paper as per approved shade or matching with veneer with applying of approved shade melamine (matt/glossy) polish on veneer.The MINIBAR`s shallhave openable shutter (Soft Close Auto Hinges) with fixing of 2 Drawer (Soft Close Telescopic Chanel), Shelves with marble on top finishing with fitting of required hardware, material & lobour etc work completed as per detailed drawings. - Size: L 1037mm x D 500mm x H 1050mm |
| 22 | Console Unit: Providing and supplying Console unit wit 2 Nos Drawer made with 19mm BWP plywood finish with approved shade 04mm thick veneer with all surface finish inwork as per details DWG or site engineer instruction. Size: L-1200mm X D-400mm X H-780mm |
| 23 | Shower Cubical Partition With Door: Providing and fixing of Glass partitionpartition made of 10 mm thickclear Tempered glass finish of approved sample fixed with \"U\" channel on wall at one side, floor & Ceiling of approved size: 1800mm X 2400mm sample. All complete in line, level and plumb, including support system,\"U\" channel, , silicone sealants, anchoring system etc. all complete as per design, drawing &satisfaction of Project Manager. |
| 24 | Supplying and installation of 164 cm (65 Inches) 4K UHD LED Smart Display: 65-inch Display | 4K |3840x2160 Screen Resolution|LED Screen Type|50Hz Refresh Rate|Ideal viewing distance of 8 - 12 ftConnectivity: 2 USB Ports|3 HDMI Ports|Bluetooth|Wi-Fi, LAN/EthernetSound output: 20W Speakers|DTS Virtual X: Immersive, surround-sound audio|Dolby Audio: Advanced audio formatting and signal processing to deliver enhanced soundSpecial features: Inbuilt Apps (Netflix, YouTube, Hotstar, Prime Video, etc.)|HDR Technology (Dolby Vision, HDR 10)|Voice remote|Screen Casting|Power Saving Mode|Gaming mode |
| 25 | Dining Chair/Study Providing and fixingof study chair of sizeas per the detaileded drawings and design made out of solid wood with commercial density foam and matching fabric upholstery and cushioni/c melamine polish wherever required complete in all respects and to the entire satisfaction of Engineer-in-Charge. (Base rate of Fabric is Rs. 950/- per Rmt) |
| 26 | Glass Partition With wooden frame : Providing and Fixing Glass partition with Wooden Frame made with wooden/plywood frame & 12mm thick Fluted Glass all wooden work done as per details DWG or site engineer instruction. Size: 960mm X 2380mm hVVIP Room LIVING AREA NEAR WASHROOM |
| 27 | Round shape Desging Mirror : Providing and fixing in position of6mm thick mirrorfor vanity counter, fixed on 12mm thick BWP ply fixed on SS framework of required section and thickness. Mirror to have frosted slit at vertical light coves. Vanity mirror to have Cost to include necessary frame work to achieve required profile including protective coating to mirror back, anti mist defogger, edge polishing, fixing mirror with clip system, silicon sealant, making provision for light fixtures, all consumables, necessary fixing arrangement etc. complete as per detail drawing, specification and as directed by Project Manager. size: 910mm X 910mm |
| 28 | 1st Floor VIP Bedroom No. 01 |
| 29 | Dressing Mirror: Providing and fixing Dressing mirror with back side Plywood 12mm base Cost to include necessary frame work to achieve required profile including protective coating to mirror back, anti mist defogger, edge polishing, fixing mirror with clip system, silicon sealant, making provision for light fixtures, all consumables, necessary fixing arrangement etc. complete as per detail drawing, specification and as directed by Architect. size: 1200mm X 2400mm |
| 30 | Living Room |
| 31 | 2 seated Sofa: Providing & fixing of two seater Sofa as per drawings and design (Basic rate of Fabric is Rs. 950/-per Mtr) with commercial density foam, structure to be made out of plywood carcass and expose part will be of solidwood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 1800mm x 900mm |
| 32 | single seated Sofa: Providing & fixing of two Single seater Sofa as per drawings and design (Basic rate of Fabric is Rs. 950/-per Mtr) with commercial density foam, structure to be made out of plywood carcass and expose part will be of solidwood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 800mm x 900mm |
| 33 | Dining Table: Providing and fixing 04 seated Dining Table made with teak wood structure with Full CNC Details Workand all wooden surface finish with approved shade polish work as per Site engineer/ Architect Instruction. Size: 1200mm Dia X 750mm Height |
| 34 | .Dining Chair: Providing and fixingof study chair of sizeas per the detaileded drawings and design made out of solid wood with commercial density foam and matching fabric upholstery and cushioni/c melamine polish wherever required complete in all respects and to the entire satisfaction of Engineer-in-Charge. (Base rate of Fabric is Rs. 950/- per Rmt) |
| 35 | Sofa Center Table : Providing and fixing Sofa Front center table size: 1200mm x 600mm as per details DWG / Architecture instruction. |
| 36 | Corner Table: 600mm DiaProviding and supplying Corner Table as per details DWG. |
| 37 | Providing & fixing of panelling with veneer finsh as per detaileded drawings and design:The panelling made out From 19mm thick MR grade plywood with required cutting & modification work proper in Line Level with outside fixing of 04mm thick approved Shade veneer finish (Basic rate of veneer Rs. 85/- per Sq.Ft & Wall paper Rs. 85/- per Sq.Ft) with Edge side Pasting of veneer Paper as per approved shade or matching with veneer with applying of approved shade melamine (matt/glossy) polish on veneer. (Head board back side) |
| 38 | Providing & fixing of TV unit panelling with veneer finish as per detailed drawings.The TV panelling made out From 19mm thick MR grade plywood with required cutting & modification work proper in line and level with outside fixing of 04mm thick approved Shade veneer finish (Basic rate of veneer Rs. 85/- per Sq.Ft) with Edge side Pasting of veneer Paper as per approved shade or matching with veneer with applying of approved shade melamine (matt/glossy) polish on veneer.The TV unit`s panelling with having of niche as per detailed drawings with veneer finish with fitting of required hardware, material & labor etc work completed as per detailed drawings. - Size: L 1176mm x H 2700mm |
| 39 | Providing and fixingof luggage rack for Deluxe and VVIP Suite of following size as per the detaileded drawings and designmade out of plywood frame finished with veneerincluding melamine polish wherever required complete in all respects and to the entire satisfaction of Engineer-in-Charge.- Size L 750mm x H 550mm x W 475mm |
| 40 | Study Table with mirror Providing & fixing of study unit as per detailed drawings.The unit made out From 19mm/12mm thick MR grade plywood with required cutting & modification work proper in Line Level with inside fixing of 0.7mm thick laminate (Basic rate of laminate 425/- Rs per Sheet) with outside fixing of 04mm thick approved Shade veneer finish (Basic rate of veneer Rs. 85/- per Sq.Ft) with Edge side Pasting of veneer Paper as per approved shade or matching with veneer with applying of approved shade melamine (matt/glossy) polish on veneer. The study table`s will having two drawer unit (soft close telescopic channel) with fitting of required hardware, material & labor etc work completed as per detailed drawings. - Size of side Table: L 1090mm x D 450mm x H 1050mm - without TOP StoneProviding & fixing of study unit`s MIRROR as per detailed drawings.The mirror made out from 06mm thick plain mirror with back side fixing of MR grade plywood (as a Back Support) with all side fixing of wooden Teak patti / strip including applying of polish with required Hardware, material & labor etc work complete in all respects.Size: L 590mm x H 1274mm |
| 41 | Providing and fixingof study chair of sizeas per the detaileded drawings and design made out of solid wood with commercial density foam and matching fabric upholstery and cushioni/c melamine polish wherever required complete in all respects and to the entire satisfaction of Engineer-in-Charge. (Base rate of Fabric is Rs. 950/- per Rmt) For all Bedroom |
| 42 | Dressing Mirror: Providing and fixing Dressing mirror with back side Plywood 12mm base Cost to include necessary frame work to achieve required profile including protective coating to mirror back, anti mist defogger, edge polishing, fixing mirror with clip system, silicon sealant, making provision for light fixtures, all consumables, necessary fixing arrangement etc. complete as per detail drawing, specification and as directed by Architect. size: 500mm X 1050mm |
| 43 | Veneer finish Partition: Providing and Fixing 160mm thick Veneer finish Partition made with 19mm BWP Plywood and required framing work External surface finish with 04mm thick approved shade veneeras per details DWG or site engineer instruction. size:1070mm X 1080mm |
| 44 | Glass Partition: Providing and Fixing 12mm thick toughened glass partition with fitting above Veneer partition Study table back side work done as per details DWg. Size: 600mm X 1050mm |
| 45 | IT & Camera Work. |
| 46 | Providing and fixing Telephone Beetal C11 as per details dwg. |
| 47 | Providing and supplying installing Epabx sn40 with CPU as per detail dwg. |
| 48 | Providing and Supplying Keyboard & Mouse as per details DWG. |
| 49 | ALL BEDROOM AREA ACCESSORY |
| 50 | Providing, supplying and fixing of soft shoes :non woven anti, Indian size with binding logo print w/ moq , as perselection architect eng.in change |
| 51 | Providing, supplying and fixing ofash tray : SS 201,with without lid , as per selection architect eng.in change |
| 52 | Providing, supplying and fixing ofclassic model double container 850ml capacity , as perselection architect eng.in change |
| 53 | Providing, supplying and fixing of toilet tissue roll holder: brand dazzle ss304 grade non rust able , as perselection architect eng.in change |
| 54 | Providing, supplying and fixing ofNapkin18\" x 21\" white satin band , as perselection architect eng.in change |
| 55 | Providing, supplying and fixingof Cushion 30\" x 18\" Hsd, as per selection architect eng.in change |
| 56 | Providing, supplying and fixingof bed runner 17\" x 95\" color jacquard, as perselection architect eng.in change |
| 57 | Providing, supplying and fixing ofNapkin rod of 15 inch on vanity black finish , as perselection architect eng.in change |
| 58 | Providing and supplying Ice bucket (As per Standard size available in market) * |
| 59 | Providing and supplying of bed Rajayias per Dwg Shown. (For Rooms bed) |
| 60 | Providing and Applying Texture paint on staircase Wall as per approved shade paint work complete as per Details DWG or site engineer instruction. |
| 61 | Providing and Fixing Wooden Top on SS Railing Staircase area made with Teak Wood & finish with approved shade PU polish work complete with all necessary hardware as per details Or site engineer instruction. |
| 62 | Providing and fixing 100 mm thick full CNC Jali finish Partition made with Aluminum/Wooden frame Both side 12mm thick plywood & 04mm thick veneer work done with all necessary hardware as per details DWG or site engineer instruction. |
| 63 | Providing and Supplying 6 seated Dining Table made with MS Base & Top plywood finish with approved shade Laminate with all necessary hardware like: nails,screw,adhesive etc work done as per details DWG or sit engineer instruction.(Cafit Area) |
| 64 | Providing and Supplying PVC Chair as per instruction of Architecture. (Cafit Area) |
| 65 | Providing and Fixing Work station Table making with BWP-19mm thick plywood internal external surface finish with approved shade Veneer &PU Polishwork finish with all necessary hardware like: nails,screw,adhesive etc as per instruction of AR. Site engineer. |
| 66 | Providing and Supplying Pedestal with 3 Nos Drawer made with 19mm plywood internal external surface finish with approved shade laminate & soft close channel with all required hardware like: nails,screw,adhesive etc. work done as per details DWG or site engineer instruction. |
| 67 | Providing and Fixing Solid partition made with Aluminium frame work + Both side 12mm plywood & finish with Approved shade laminate as per details DWG or site engineer instruction. |
| 68 | 3rd Floor bedroom Area Suite Bedroom New Work. (Instead of Doormatry) |
| 69 | Providing and fixing ofBrass table lamp as per design approved by the architect complete in all respects and to the entire satisfaction of Engineer-in-Charge. |
| 70 | Providing & fixing of plywood jamb as per detailed drawings. The jamb made out From 38mm + 38mm thick MR grade plywood with required cutting & modificationwork proper in Line Level with outside fixing of 04mm thick approved Shade veneer finish (Basic rate of veneer Rs.85/-per Sq.Ft) with Edge side Pasting of edge band/veneer Paper as per approved shade with applying of approved shade melamine (matt/glossy) polish on veneer. work completed as per detaileded drawings engineer instruction. |
| 71 | Loose Furniture In G.F bedroom Area |
| 72 | Providing and supplying installing Photo Frame ART Worksize 12\" X 12\" as per Architecture instruction. |
| 73 | Providing and supplying installing TV Dish channel Black wire as per site engineer instruction. |
| 74 | Providing and supplying installing 12mm thick Thoughned glass shelve in vanity counter withh ss Braket as per Architecture instruction. |
| 75 | Providing and supplying 43\" LG Tv in Bedroom area as per site engineer & Architecture instruction. |
| 76 | Providing and fixing 75mm thick Bison Board partition with required alluminium frame work size 50mm x 25mm and both 12mm thick cement sheet cladding paint finish as per detail dwg or site engineer instruction. |
| 77 | Providing and fixing Air Exusting Jali in ceiling as per architecture instruction. |
| 78 | Providing and fixing Laminated finish storage made with 19mm BWP plywood finish with Both side laminate as per details DWG. |
| 79 | Proviiding and supplying Mini Freezer in Bedroom Minibar. |
| 80 | Providing and supplyingSS Mobile stand in Washroom area. |
| 81 | Providing and fixing \" L\" corner guard in washroom area made ss finish as per site engineer instruuction. |
| 82 | Providing and supplying Bettel Teliphone as per site engineer instruction. |
| 83 | Providing, supplying and fixing of toilet tissue roll holder: brand dazzle ss304 grade non rust able , as perselection architect eng.in change |
| 84 | OLD REFURSHINED FURNITURE. |
| 85 | ADMINISTOR SIR OFFICE TABLE: Repolishing & Required reapiring work & Hardware replacement as per required. Size: L-1800mm X 800mm X H- 750mm |
| 86 | CNC DESGIN CONSOULE: Repolishing & Required reapiring work & Hardware replacement as per required. Size: L-1200mm X 500mm X H- 900mm |
| 87 | ADMINISTOR SIR OFFICE TABLE SIDE STORAGE: Repolishing & Required reapiring work & Hardware replacement as per required. Size: L-1000mm X 500mm X H- 750mm |
| 88 | G. Floor Bedroom No. 01 |
| 89 | CNC DESGIN CONSOULE: old polish removing & Repolishing & Required reapiring work & Hardware replacement as per required. Size: L-1200mm X 500mm X H- 900mm |
| 90 | Double Bed: old polish removing & Repolishing & Required reapiring work & Hardware replacement as per required. Size: L-2000mm X D- 2100mm |
| 91 | Side Table: old polish removing & Repolishing & Required reapiring work & Hardware replacement as per required. Size: L-600mm X D- 600mm |
| 92 | BED HEAD BOARD FABRIC REPLACMENT: Old fabric removed with Foam & installing new fabric & foam as per required with new plywood base as per Ar. Instruction. |
| 93 | Old Door with Door frame: old polish removing & Repolishing & Required reapiring work & Hardware replacement as per required. Size: L-1500mm X H- 2000mm |
| 94 | 1st Floor Administor Sir Room. |
| 95 | 10 Seater Dining Table: old polish removing & Repolishing &with Bronwz Glass Top Required reapiring work & Hardware replacement as per required. Size: L-2400mm X D- 1200mm |
| 96 | Dining chair: old polish removing & Repolishing &with New Fabric & foam workRequired reapiring work & Hardware replacement as per required. |
| 97 | Desgin Consoule Unit: Removing old polish & Repolishing with reqired repairing work with required material Like:ply,veneer,hardware & provide new Glass Top as per Ar. Instruction. Size: L-1600mm X D- 450mm X H- 900mm |
| 98 | 3 Seater Sofa: Removing old Fabric & Refurnished with Luxury Leather with required highdencity foam for smoothing & softness with reqired repairing work as per Architecture instruction. |
| 99 | Single Seater Sofa: Removing old Fabric & Refurnished with Luxury Leather with required highdencity foam for smoothing & softness with reqired repairing work as per Architecture instruction. |
| 100 | Center Table: Removing old polish & Repolishing work with required repairing work as per Ar. Instruction. |
| 101 | Corner Cofee table:Removing old polish & Repolishing work with required repairing work as per Ar. Instruction. |
| 102 | VIP Room - 02 |
| 103 | 04 Seater Dining Table: old polish removing & Repolishing &with Bronwz Glass Top Required reapiring work & Hardware replacement as per required. Size:Dia 1200mm |
| 104 | Dining chair: old polish removing & Repolishing &with New Fabric & foam workRequired reapiring work & Hardware replacement as per required. |
| 105 | CNC Desgin Consoule Unit: Removing old polish & Repolishing with reqired repairing work with required material Like:ply,veneer,hardware & provide new Glass Top as per Ar. Instruction. Size: L-1500mm X D- 450mm X H- 900mm |
| 106 | Center Table: Removing old polish & Repolishing work with required repairing work as per Ar. Instruction. |
| 107 | Corner Cofee table:Removing old polish & Repolishing work with required repairing work as per Ar. Instruction. |
| 108 | Door Closer: Providing and Supplying Door Closer (Haffle) as per site Requirment or site Engineer instruction. |
