|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush-wood, trees and saplings of girth up to 30 cm measured at 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the cleared area. |
| 2 | Excavation in foundation in ordinary soil (Loam, Clay or Sand) lncluding lift upto 1.50 m and lead upto 3Om and including filling watering and ramming of excavated eafth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer lncharge upto a distance of 30m from the foundation trenches. Mannual (Small work) |
| 3 | Providing and laying cement concrete in 1:4:8 (1 Cement:4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, lncluding cost of form work. in Foundation and floors. |
| 4 | Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 3 coarse sand : 4 graded stone aggregates 12.5 mm nominql size) |
| 6 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:2.35.3.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 7 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and including the cost of centering, shuttering, finishing but excluding reinforcement, including admixtures in recommended proporlions as per lS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as perdesign mix is payable / recoverable separately). All work up to Plinth level. |
| 8 | Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). |
| 9 | 15mm Cement plaster with cement mortar in proportion of l:4 cement & coarse sand of single coat for exterior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding80 mm. ln girth and finished even and smooth. |
| 10 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled wilh a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in whiie cement mortar 1:2 (1 white cemenl :2 stone dust) with an admixture of pigment malching the stone shade :(To be secured to the backinq and the sides by means of cramps and pins which shall be paid for separately) Red sand stone - exposed face fine dressed with rough backing. 30 mm thick. |
| 11 | Cast-ln-Situ Cement Concreto M 20 Kerb Construction of cement concrete kerb with top and bottom width 1\"15 and 165mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete tad manually, alt complete as per Clause 408. |
| 12 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. |
| 13 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications |
| 14 | Supply, transportation, and fixing of 4m-high FRP sculpture of Krishna Makhan Handi with hands, made of 20–30 mm thick exterior-grade FRP with internal MS framing, including moulding, finishing, UV-resistant coating, and anchoring to RCC base with SS bolts and chemical fasteners, complete as per drawing and direction of Engineer-in-Charge |
| 15 | Providing, supplying, and fixing a 4.5-meter-high sandstone architectural feature comprising carved arches, decorative jali panels, and ornamental columns, manufactured from high-quality natural sandstone and executed strictly as per the approved design and following the drawing. All components shall be precision-cut, hand-finished, and installed in modular sections using stainless-steel dowels, clamps, chemical fasteners, and non-shrink grout for proper alignment, stability, and durability. The work includes complete finishing, joint treatment, and polishing to achieve the approved aesthetic and architectural character. |
| 16 | Providing and fixing of WHITE SANDSTONE \"AGRA\" Letter Sculpture of height 1200mm thikness 200mm( as per drawing)Approx as per attached drawing and without damaging the edges placed on garnite stone finished platform with 18 w focus lights 4complete as per instruction from consultant and engineer incharge..(Letter AGRA IN HINDI) |
| 17 | The work includes supplying, fabricating, transporting, and fixing a 4.5-meter-high metal sculpture in the shape of a stylized peacock feather, made using high-quality MS/SS sections, stiffeners, and laser-cut metal plates as per approved design and drawing. All metal components shall be precision-cut, welded, ground, and finished with anti-corrosive primer, epoxy coating, and UV-resistant topcoat suitable for outdoor installation |
| 18 | Supply, transportation, and fixing of three FRP sculptures (two seated tabla musicians – 2.5m height each and one dancing woman – 3.2m height), made of 20–30 mm exterior-grade FRP with internal MS framework, artistic finishing, UV-resistant coating, and anchoring to RCC base using SS bolts and chemical fasteners, complete as per approved drawing and direction of Engineer-in-Charge |
| 19 | Supply, transportation, and fixing of a 3.5m-high carved sandstone column (diameter as per structural design), comprising carved base block, tapered fluted shaft sections, decorative capital and top stone, machine-cut and hand-finished from high-quality natural sandstone, including modular assembly, stainless-steel dowels, MS cramps, chemical fasteners, non-shrink grout, alignment, joint finishing, and complete installation on RCC base as per approved drawing and direction of Engineer-in-Charge. |
| 20 | Supply, transportation, and fixing of a 2.5m-high carved sandstone peacock sculpture, machine-cut and hand-finished from high-quality natural sandstone with detailed wings, body, and ornamental tail, including modular fabrication, stainless-steel dowels, MS cramps, chemical fasteners, non-shrink grout, proper alignment, joint finishing, and complete installation on RCC base as per approved drawing and direction of Engineer-in-Charge. |
| 21 | Supply, transportation, and fixing of 1.5m-high laser-cut metal jali panels over a total length of 30m, fabricated from high-quality MS/SS plates with reinforced MS framing, including anti-rust primer, epoxy coating, UV-resistant topcoat, modular assembly, heavy-duty support brackets/posts, stainless-steel anchor bolts, chemical fasteners, welding (where required), alignment, joint finishing, and complete installation along the road bridge side as per approved drawing and direction of Engineer-in-Charge. |
| 22 | Supply, transportation, and fixing of a 4m-diameter FRP Mahabharata Rath Wheel sculpture, manufactured with 20–30 mm thick exterior-grade alkali-resistant FRP skin and internal MS structural framework, including precision moulding, ornamental detailing, UV-resistant finishing, modular assembly, stainless-steel anchor bolts, MS base plates, chemical fasteners, non-shrink grout, complete alignment, joint finishing, and installation on RCC base as per approved design, drawing, and direction of the Engineer-in-Charge. |
| 23 | Supply, transportation, and fixing of an 8m-long and 500mm-diameter metal Krishna Flute sculpture with ornamental engravings and peacock feather detailing, fabricated from high-quality MS/SS rolled shells with internal MS stiffener rings and ribs, including laser-cut decorative elements, welding and grinding, anti-rust primer, epoxy and UV-resistant topcoat, heavy-duty MS base plates, stainless-steel anchor bolts, chemical fasteners, non-shrink grout, proper alignment, joint finishing, lifting, and complete installation on RCC base as per approved design, drawing, and direction of Engineer-in-Charge. |
| 24 | Stone SignagesInauguration Plate :Providing & fixing inauguration plate (Takhti) made from 25 mm thick Baleshwar/red agra/pink dholpur stone with embossed/engraved text letters made from SS 304 grade of various sizes 1. The fonts and letters shall be as per the reference drawing made from SS 304 with national Emblem Logo The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect\"s design intent. No additional claims will be entertained for this. |
| 25 | Stone DustbinSupplying & fixing fine dressed sand \"STONE DUSTBIN\" as per traditional design made of white sand stone as per approved design ( size of dustbin inner dia 50cm , outer dia 65 cm & inner depth 67 cm ,outer height 75 cm.) including top rim with moulding work as per approved design inside removable S S steel Bucket for cleaning purpose ,complete in all respect. |
| 26 | Supply of KESSLEC DECORATIVE Poles with decorative base of castaluminum dia 250mm and height 500mm & shaft dia of 76mm with1) Design Standard generally as per EN40-3-1. Wind load calculation asper IS 875 Part 3.2) Design criteria-2.1) Basic Wind Speed: 169 kmph2.2) Topography is considered as flat.3) Materials3.1) Pole shaft: YSt 240 as per IS 11613.2) Base plate: A36/A572-50 or equivalent3.3) Anchor Bolts: EN8 Grade4) Hot dip galvanised to ASTM A123, with minimum average GI coating of65μm.5) PU(Polyurethane) painted with avg. DFT of 70μm, using very highquality paint & primer.6) Marine grade paint is available at additional cost.7) Anchor bolts are optional and can be ordered separately. Though it isrecommended touse the bolts as per our specifications.8) Spigot dia./length is dependent on mix of type of pole/poleheight/type of luminaire (for post top installation)type of bracket (for bracket mounted luminaire).9) Use KOC (Keselec Ordering Code) for colour,texture,embellishmentand accessories of poles. |
| 27 | Supply of KESSLEC RILA LED Decorative Classic luminaire (IP66), BIScertified with a body and frame of high pressure die cast aluminium, afrosted PMMA protector (IK06) fixed on to the optical unit, separateoptical and control gear compartment (IP65) accessed by opening fourscrews at the top of the luminaire, a vent pressure equalization unit andpre-cabled as required.Highly efficient temperature resistant lenses for symmetric orasymmetric light distribution with several optical options providingexcellent photometry to optimally cater to different applications.Overall system efficiency of 110lm/W at correlated colour temperature(CCT) of 4000K (optional 3000K & 5700K), colour rendering index (CRI)>70 and L70 rated lifetime of 50,000 hours.Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIScertified potted driver having internal surge protection of 4/4 kV and anadditional surge protection device (SPD) of 10/10 kV (in both Common &Differential Modes). |
| 28 | Supply and laying IP 67 Focus Lights/ground burial light Volt 13w as per approved design and drawing as approved by architect and Engineer-in-charge. Make (Kesslec ,Myfair, philips) |
| 29 | Letter AGRA IN HINDI 600 MMSupply and laying IP 67 LED STRIP 5w as per approved design and drawing as approved by architect and Engineer-in-charge.(Make -Kesslec /philips/Myfair ) |
| 30 | 1.5m-high laser-cut metal jali panels over a total length of 30m( 30 m strip light) 10m white, 10 saffron and 10m green Supply and laying IP 67 LED STRIP 5w as per approved design and drawing as approved by architect and Engineer-in-charge.(Make -Kesslec /philips/Myfair ) |
| 31 | 300 m wall lenght illumination Flood light each 3 m |
| 32 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 2 core |
| 33 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 4 sq. mm 3 core |
| 34 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 4 sq. mm 4 core |
| 35 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 4 core |
| 36 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sq. mm 4 core |
| 37 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core |
| 38 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25 sq. mm 3-1/2 core |
| 39 | Supply and laying of aluminium conductor PVC insulatedarmoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35 sq. mm 3-1/2 core |
| 40 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). |
| 41 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm |
| 42 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm |
| 43 | Fine dressing of the ground. |
| 44 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 45 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 46 | Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and earth shall be paid for separately). With grass Turf |
| 47 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep |
| 48 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 45 cm dia, and 45 cm deep. |
| 49 | Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical members shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/ PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect. |
| 50 | Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. |
| 51 | Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of the officer in charge. |
| 52 | Providing & fixing of White River (Stone) Pables size of 2\" to 2.50\" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. |
| 53 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. |
| 54 | Terminalia Delhnica / Baheda Specimen Ht 16\"/Girth 10\" |
| 55 | Callistemon Citrinus - Bottle Brush - Speci. Ht 12\"Girth 6\" |
| 56 | Cassia Fistula - Amaltas - Specimen Ht 12\" Girth 8\" |
| 57 | Delonix regia -Gulmohar - Specimen Ht 12\"+ Girth 8\" |
| 58 | Providing and Displaying Ficus Retusa Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 59 | Providing and Displaying Ficus Nuda Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 60 | Phoenix Sylvesteris - Specimen Stem Ht 10\"/ Girth 36\" |
| 61 | Washingtonia Filifera - Specimen Stem Ht 18\"/Girth 40\" |
| 62 | Providing and stacking of Calliandra, emarginata of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. |
| 63 | Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge. |
| 64 | Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 65 | Providing and stacking of Hibiscus variegated of height 60-75 cm. with healthy variegated foliage in earthen pots size 25 cm as per direction of the officer-in-charge. |
| 66 | Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 67 | Providing and stacking of Bignonia venusta (Golden shower) of height 30cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 68 | Providing and stacking Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 69 | Providing and stacking Clerodendrum splendens of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge |
| 70 | Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge. |
| 71 | Providing and stacking of Asparagus sprengeri of height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. |
| 72 | Providing and stacking of Aspidistra, having 10 to 15 leaves well developed with fresh & healthy in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 73 | Agave Mix Varieties 30 CM Ht |
| 74 | Aloe Vera Mix Varieties 30 CM Ht |
| 75 | Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 76 | Chrysopogon Zizanioides - Vetiver Grass |
| 77 | Cymbopogon Citratus - Lemon Grass |
| 78 | Pennisetum Foxtrot - Fountain Grass Please Enable Macros to View BoQ information |
