|
| 1 | Discount on MRP of Manufacturer\"s/Authorized distributor price list enclosed with bid document |
| 2 | 1. All taxes (GST) are to be included in bidding rates. 2. Bidder Should quote discount on Manufacture/Authorised dealer Price list & all job work rates in financial proposal. 3. L-1 Will be decided on maximum discount offered on Manufacture/Authorised dealer Price list in financial proposal (A). Although tenderer may be asked for rate negotiation on discount and job work list if it seems the rates quoted by tenderer is higher. 4. For the job work not including in above list “B”, contractor will have to do the work on the manufacture/authorize dealer’s price list rate. |
| 3 | Water Separator Opening And Fitting |
| 4 | Hydraulic Distributor new and fitting work |
| 5 | Engine Mounting Front And Rear |
| 6 | Engine opening and fitting |
| 7 | Engine Over Hauling Complete Job Work |
| 8 | Fuel Pump Complete Repair Job Work |
| 9 | Hydraulic pump belt new and fitting work |
| 10 | Turbo Complete Repair Job Work |
| 11 | Wheel opening, greasing and fitting each |
| 12 | Cabin mounting opening and fitting |
| 13 | Bumper opening, repairing and fitting |
| 14 | Front leaf pin bush fitting |
| 15 | Front leaf shackle fitting |
| 16 | Gear top opening and fitting |
| 17 | Nozzle repairing work |
| 18 | Fuel pump calibration |
| 19 | Front leaf spring opening, fitting and tensioning work one side |
| 20 | Rear leaf spring opening fitting and tensioning work one side |
| 21 | PTO gear opening and fitting |
| 22 | Engine Head repairing work |
| 23 | Radiator opening, cleaning and fitting work |
| 24 | Universal joint opening and fitting |
| 25 | Engine Oil service job work |
| 26 | Silencer opening, repairing and fitting work |
| 27 | Clutch cylinder opening and fitting |
| 28 | Clutch overhauling opening and fitting |
| 29 | Fly wheel disc repairing |
| 30 | Front Center bolt opening and fitting |
| 31 | Rear Center bolt opening and fitting |
| 32 | Half yoke opening and fitting |
| 33 | Coupling shaft thread repairing |
| 34 | Radiator fan opening and fitting |
| 35 | Gear Mounting pad |
| 36 | Material filling in PTO coupling with repairing and PTO shaft welding |
| 37 | Popular shaft opening and fitting |
| 38 | Front wheel drum repair each |
| 39 | Rear wheel drum repair each |
| 40 | Hub axle repairing |
| 41 | Complete nipple greasing work |
| 42 | Hydraulic pipe fitting work |
| 43 | Shaft opening and new yoke teeth fitting |
| 44 | Shaft bend repairing work |
| 45 | Pressure plate repairing work |
| 46 | Hydraulic Jack opening, repairing and fitting |
| 47 | Steering king pin parts with job work |
| 48 | Brake liner shoe fitting each set |
| 49 | Power Steering pump |
| 50 | Hydraulic Jack pin, lock parts and fitting |
| 51 | Hydraulic jack Nakke upper /lower repair and fitting |
| 52 | Hydraulic Jack new seal kit and fitting |
| 53 | Electrionic Control unit checking work |
| 54 | Checking of vehicle by Computer in garage |
| 55 | Air compressor head repair |
| 56 | Clutch booster repair |
| 57 | Front/rear break overhauling, repairing work |
| 58 | Gear overhauling work |
| 59 | Coupling shaft threat repairing |
| 60 | Cabin seat repair work |
| 61 | New Cabin seat |
| 62 | Cabin door repair work each |
| 63 | Body denting, repairing, painting with material with welding, riveting and all other work per sq. feet rate |
| 64 | 1. All taxes (GST) are to be included in bidding rates. 2. Bidder Should quote discount on Manufacture/Authorised dealer Price list & all job work rates in financial proposal. 3. L-1 Will be decided on maximum discount offered on Manufacture/Authorised dealer Price list in financial proposal (A). Although tenderer may be asked for rate negotiation on discount and job work list if it seems the rates quoted by tenderer is higher. 4. For the job work not including in above list “B”, contractor will have to do the work on the manufacture/authorize dealer’s price list rate. Please Enable Macros to View BoQ information |
