|
| 1 | Discount on MRP of Manufacturer\"s/Authorized distributor price list. |
| 2 | 1. All taxes (GST) are to be included in bidding rates. 2. Bidder Should quote discount on Manufacture/Authorised dealer Price list &all job work rates in financial proposal.3. L-1 Will be decided on maximum discount offered on Manufacture/Authorised dealer Price list in financial proposal (A). Although tenderer may be asked for rate negotiation on discount and job work list if it seems the rates quoted by tenderer is higher. 4. For the job work not including in above list “B”, contractor will have to do the work on the manufacture/authorize dealer’s price list rate. |
| 3 | MahindraJayo3200 DI |
| 4 | Water Separator Opening And Fitting |
| 5 | Air Compressor Head repair |
| 6 | Compressor Repair Job Work |
| 7 | Clutch Booster Repair Job Work |
| 8 | Engine Mounting Front And Rear |
| 9 | Engine opening and fitting |
| 10 | Engine Over Hauling Complete Job Work |
| 11 | Fuel Pump Complete Repair Job Work |
| 12 | PTO Gear Teeth Job Work |
| 13 | Turbo Complete Repair Job Work |
| 14 | Wheel opening, greasing and fitting each |
| 15 | Cabin mounting opening and fitting |
| 16 | Bumper opening, repairing and fitting |
| 17 | Front leaf pin bush Shackle Fitting |
| 18 | Rear Leaf Pin Bush, Shackle Fitting |
| 19 | Gear top opening and fitting |
| 20 | Fuel pump repairing and overhauling |
| 21 | Nozzle Opening repairing fitting work |
| 22 | Fuel pump calibration |
| 23 | Front leaf spring opening, fitting and tensioning work |
| 24 | Rear leaf spring opening fitting and tensioning work |
| 25 | PTO gear opening and fitting |
| 26 | Head repairing work |
| 27 | Radiator opening, cleaning and fitting work |
| 28 | Universal joint opening and fitting |
| 29 | Engine Oil service job work |
| 30 | Silencer opening, repairing and fitting work |
| 31 | Clutch cylinder opening and fitting |
| 32 | Clutch overhauling opening and fitting |
| 33 | Fly wheel disc repairing |
| 34 | Rear Center bolt opening and fitting |
| 35 | Front Center bolt opening and fitting |
| 36 | Break Liner Repairing |
| 37 | Half yoke opening and fitting |
| 38 | Coupling shaft thread repairing |
| 39 | Radiator fan opening and fitting |
| 40 | Engine foundation pad opening and fitting |
| 41 | Material filling in PTO coupling with repairing and PTO shaft welding |
| 42 | Popular shaft opening and fitting |
| 43 | Front wheel drum repair each |
| 44 | Rear wheel drum repair each |
| 45 | Hub axle repairing |
| 46 | Complete nipple greasing work |
| 47 | Hydraulic pipe fitting work |
| 48 | Shaft opening and new yoke teeth fitting |
| 49 | Shaft bend repairing work |
| 50 | Front Break Overhauling, repairing work |
| 51 | Rear Break Overhauling, repairing work |
| 52 | Gear overhauling work |
| 53 | Phatak Denting & Repair Work |
| 54 | Rear Dala Repair work |
| 55 | Mahindra265 DI |
| 56 | Water Separator Opening And Fitting |
| 57 | Engine opening and fitting |
| 58 | Engine Over Hauling Complete Job Work |
| 59 | Fuel Pump Complete Repair Job Work |
| 60 | PTO Gear Teeth Job Work |
| 61 | Wheel opening, greasing and fitting each |
| 62 | Bumper opening, repairing and fitting |
| 63 | Gear top opening and fitting |
| 64 | Fuel pump repairing and overhauling |
| 65 | Nozzle Opening repairing fitting work |
| 66 | Fuel pump calibration |
| 67 | PTO gear opening and fitting |
| 68 | Head repairing work |
| 69 | Radiator opening, cleaning and fitting work |
| 70 | Engine Oil service job work |
| 71 | Silencer opening, repairing and fitting work |
| 72 | Clutch cylinder opening and fitting |
| 73 | Clutch overhauling opening and fitting |
| 74 | Fly wheel disc repairing |
| 75 | Front Center bolt opening and fitting |
| 76 | Break Liner Repairing |
| 77 | Radiator fan opening and fitting |
| 78 | Material filling in PTO coupling with repairing and PTO shaft welding |
| 79 | Front wheel drum repair each |
| 80 | Rear wheel drum repair each |
| 81 | Hub axle repairing |
| 82 | Complete nipple greasing work |
| 83 | Hydraulic pipe fitting work |
| 84 | Front Break Overhauling, repairing work |
| 85 | Rear Break Overhauling, repairing work |
| 86 | Gear overhauling work |
| 87 | MahindraBolero Pickup |
| 88 | Water Separator Opening And Fitting |
| 89 | Air Compressor Head repair |
| 90 | Compressor Repair Job Work |
| 91 | Clutch Booster Repair Job Work |
| 92 | Engine Mounting Front And Rear |
| 93 | Engine opening and fitting |
| 94 | Engine Over Hauling Complete Job Work |
| 95 | Fuel Pump Complete Repair Job Work |
| 96 | PTO Gear Teeth Job Work |
| 97 | Turbo Complete Repair Job Work |
| 98 | Wheel opening, greasing and fitting each |
| 99 | Cabin mounting opening and fitting |
| 100 | Bumper opening, repairing and fitting |
| 101 | Front leaf pin bush Shackle Fitting |
| 102 | Rear Leaf Pin Bush, Shackle Fitting |
| 103 | Gear top opening and fitting |
| 104 | Fuel pump repairing and overhauling |
| 105 | Nozzle Opening repairing fitting work |
| 106 | Fuel pump calibration |
| 107 | Front leaf spring opening, fitting and tensioning work |
| 108 | Rear leaf spring opening fitting and tensioning work |
| 109 | PTO gear opening and fitting |
| 110 | Head repairing work |
| 111 | Radiator opening, cleaning and fitting work |
| 112 | Universal joint opening and fitting |
| 113 | Engine Oil service job work |
| 114 | Silencer opening, repairing and fitting work |
| 115 | Clutch cylinder opening and fitting |
| 116 | Clutch overhauling opening and fitting |
| 117 | Fly wheel disc repairing |
| 118 | Rear Center bolt opening and fitting |
| 119 | Front Center bolt opening and fitting |
| 120 | Break Liner Repairing |
| 121 | Half yoke opening and fitting |
| 122 | Coupling shaft thread repairing |
| 123 | Radiator fan opening and fitting |
| 124 | Engine foundation pad opening and fitting |
| 125 | Material filling in PTO coupling with repairing and PTO shaft welding |
| 126 | Popular shaft opening and fitting |
| 127 | Front wheel drum repair each |
| 128 | Rear wheel drum repair each |
| 129 | Hub axle repairing |
| 130 | Complete nipple greasing work |
| 131 | Hydraulic pipe fitting work |
| 132 | Shaft opening and new yoke teeth fitting |
| 133 | Shaft bend repairing work |
| 134 | Front Break Overhauling, repairing work |
| 135 | Rear Break Overhauling, repairing work |
| 136 | Gear overhauling work |
| 137 | Phatak Denting & Repair Work |
| 138 | Rear Dala Repair work |
| 139 | MahindraAllvey Nissan |
| 140 | Water Separator Opening And Fitting |
| 141 | Air Compressor Head repair |
| 142 | Compressor Repair Job Work |
| 143 | Clutch Booster Repair Job Work |
| 144 | Engine Mounting Front And Rear |
| 145 | Engine opening and fitting |
| 146 | Engine Over Hauling Complete Job Work |
| 147 | Fuel Pump Complete Repair Job Work |
| 148 | PTO Gear Teeth Job Work |
| 149 | Turbo Complete Repair Job Work |
| 150 | Wheel opening, greasing and fitting each |
| 151 | Cabin mounting opening and fitting |
| 152 | Bumper opening, repairing and fitting |
| 153 | Front leaf pin bush Shackle Fitting |
| 154 | Rear Leaf Pin Bush, Shackle Fitting |
| 155 | Gear top opening and fitting |
| 156 | Fuel pump repairing and overhauling |
| 157 | Nozzle Opening repairing fitting work |
| 158 | Fuel pump calibration |
| 159 | Front leaf spring opening, fitting and tensioning work |
| 160 | Rear leaf spring opening fitting and tensioning work |
| 161 | PTO gear opening and fitting |
| 162 | Head repairing work |
| 163 | Radiator opening, cleaning and fitting work |
| 164 | Universal joint opening and fitting |
| 165 | Engine Oil service job work |
| 166 | Silencer opening, repairing and fitting work |
| 167 | Clutch cylinder opening and fitting |
| 168 | Clutch overhauling opening and fitting |
| 169 | Fly wheel disc repairing |
| 170 | Rear Center bolt opening and fitting |
| 171 | Front Center bolt opening and fitting |
| 172 | Break Liner Repairing |
| 173 | Half yoke opening and fitting |
| 174 | Coupling shaft thread repairing |
| 175 | Radiator fan opening and fitting |
| 176 | Engine foundation pad opening and fitting |
| 177 | Material filling in PTO coupling with repairing and PTO shaft welding |
| 178 | Popular shaft opening and fitting |
| 179 | Front wheel drum repair each |
| 180 | Rear wheel drum repair each |
| 181 | Hub axle repairing |
| 182 | Complete nipple greasing work |
| 183 | Hydraulic pipe fitting work |
| 184 | Shaft opening and new yoke teeth fitting |
| 185 | Shaft bend repairing work |
| 186 | Front Break Overhauling, repairing work |
| 187 | Rear Break Overhauling, repairing work |
| 188 | Gear overhauling work |
| 189 | Phatak Denting & Repair Work |
| 190 | Rear Dala Repair work |
| 191 | 1. All taxes (GST) are to be included in bidding rates. 2. Bidder Should quote discount on Manufacture/Authorised dealer Price list &all job work rates in financial proposal.3. L-1 Will be decided on maximum discount offered on Manufacture/Authorised dealer Price list in financial proposal (A). Although tenderer may be asked for rate negotiation on discount and job work list if it seems the rates quoted by tenderer is higher. 4. For the job work not including in above list “B”, contractor will have to do the work on the manufacture/authorize dealer’s price list rate. Please Enable Macros to View BoQ information |
