|
| 1 | Excavating over areas in soft or loose soil, not exceeding 1.5 meter deep, and disposing of the excavated material completely as specified and as directed. |
| 2 | Excavating over areas in any type of soil, but depth exceeding 1.5 meter but not exceeding 3 meter, and disposing of the excavated material completely as specified and as directed. |
| 3 | Excavating over areas in any type of soil, but depth exceeding 3 meter but not exceeding 4.5 meter, and disposing of the excavated material completely as specified and as directed. |
| 4 | Excavating in trenches in soft or loose soil, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth, for foundations, shafts, cesspits, manholes, and similar structures, where the area on plan does not exceed 10 Square Meter, and disposing of the excavated material completely as specified and as directed. |
| 5 | Returning the excavated soil for filling, including spreading, leveling, watering, and well ramming in layers, each not exceeding 25 centimeter thick, completely as specified and as directed. |
| 6 | Removing excavated soil to a distance exceeding 250 meter but not exceeding 500 meter away, and depositing the material where specified and as directed, at a level not exceeding 1.5 meter above the starting point, completely as specified and as directed. |
| 7 | Material and Labour for cement concrete mix 1:4:8 (using 40 millimeter graded stone aggregate) in foundations, filling, and mass concrete, complete all as specified and as directed. |
| 8 | Material and Labour for Reinforced Cement Concrete grade M-25 (Design Mix) in walls, retaining walls, basement walls, ballast walls, and similar structures; of any thickness; situated above the top of footings; including attached pilasters and buttresses, complete all as specified and as directed. |
| 9 | Material and Labour for Formwork to faces of walls, retaining walls, abutments, parapets, and staircase railings and similar work, including attached pilasters, buttresses, et cetera; applied vertically, to batter, horizontally, or sloping, finished fair and even, complete all as specified and as directed. |
| 10 | Material and Labour for Reinforced Cement Concrete grade M-25, Design Mix (using 20 millimeter graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and similar structures, complete all as specified and as directed. |
| 11 | Use and waste for formwork to soffits of suspended slabs such as roof slab, floor slab, landing, and similar work; not exceeding 200 millimeter thick, horizontal or sloping, finished fair and even, complete all as specified and as directed. |
| 12 | Supplying and Fixing Thermo-Mechanically Treated bars 10 millimeter diameter and over, cut to length, bent to the required shape, including cranking, bending spirally for hooping for columns, hooking ends, and binding with annealed mild steel wire not less than 0.9 millimeter diameter or securing with clips, complete all as specified and as directed. |
| 13 | Supplying and Fixing Thermo-Mechanically Treated bars 6-8 millimeter diameter, cut to length, bent to the required shape, including cranking, bending spirally for hooping for columns, hooking ends, and binding with the annealed mild steel wire not less than 0.9 millimeter diameter or securing with clips, complete all as specified and as directed. |
| 14 | Material and Labour for Brick work using sub class \"B\" bricks, straight or curved on plan (exceeding 6 meter mean radius), built in Cement Mortar 1:4, complete all as specified and as directed. |
| 15 | Material and Labour for 15 millimeter thick cement plaster in Cement Mortar 1:4 on fair or unfair faces of brick work, finishing the surface even and fair, complete all as specified and as directed. |
| 16 | Material and Labour for brick work using sub class \"B\" bricks (old size brick), straight or curved on plan to any radius, in half brick thick walls, built in Cement Mortar 1:4, Pointed flush in same Mortar complete including demolition of brick work built in cement mortar, et cetera, all as specified and as directed. |
| 17 | Material and Labour for loose filling with broken stone aggregates of size 12.5 millimeter and 20 millimeter, complete all as specified and as directed. |
| 18 | Material and Labour for filling of Pea gravel of 3 millimeter to 5 millimeter size, as in recharging pits, complete all as specified and as directed. |
| 19 | Material and Labour for filling of coarse sand or red bajri as in recharging pits, complete all as specified and as directed. |
| 20 | Supplying and Fixing Polyvinyl Chloride grating as in well cap for 150 millimeter bore pipe, complete all as specified and as directed. |
| 21 | Material and Labour for boring hole 300 millimeter diameter completely by Down-the-Hole compressor rotary method to a depth up to 50 meter in any type of soil, including disposal of surplus soil, complete all as specified and as directed. |
| 22 | Supplying, lowering and fixing into bore 150 millimeter diameter Polyvinyl Chloride casing pipe with perforated holes including wrapping of filter mesh around the pipe as a whole, complete all as specified and as directed. |
| 23 | Material and Labour for filling with pea size gravel 10 millimeter size in bore holes, complete all as specified and as directed. |
| 24 | Material and Labour for laying of 450 millimeter bore Reinforced Cement Concrete, Class NP3 pipes with one collar per length of pipe, including filling of joints with Cement Mortar 1:3, complete all as specified and as directed. |
| 25 | Material and Labour for Plain Cement Concrete mix 1:4:8 type D-2 (using 40 millimeter graded stone aggregate) as concrete bed, laid to falls in trenches of any depth, including packing under and haunching against the sides of NP-3 pipes 450 millimeter bore, after the pipes have been laid and tested, complete all as specified and as directed. |
| 26 | Material and Labour for cement concrete mix 1:3:6 type C-2, using 40 millimeter graded stone aggregate, as in surface channel and drain and similar work, including demolition, complete all as specified and as directed. |
| 27 | Extra for forming fair finished drain or channel 30 centimeter inner girth in cement concrete, using extra cement, including forms, moulds, mitered or stopped ends, complete all as specified and as directed. |
| 28 | Material and Labour for Plain Cement Concrete mix 1:2:4 type B-0 (using 12.5 millimeter graded crushed stone aggregates) as in benching for manholes, bands, coping, bed plate, et cetera, including necessary form work, if any, and finishing the exposed surface even and smooth using extra cement, complete all as specified and as directed. |
| 29 | Material and Labour for mild steel framed work, such as in doors or gates, made of angle or other sections, including gusset plates, rails, braces, et cetera. Completely drilled for fixing of steel sheeting or other covering. Doors, et cetera, to be prepared for hanging or sliding, including either hooks or steel hanging door fittings, and also fastening and fixing with complete fabrication, conforming to Fe-290 (Grade E-165), all as specified and as directed. |
