|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L forcement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base concrete including demolition of concrete and paving n.exc 15cm thick (below or above GL) complete all as specified and directed. |
| 3 | M&L for 25mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in levelling course complete all as specified and directed. |
| 4 | M&L formulticolour vitrified outdoor heavy duty, parking tiles 9 -10 mm thick size 400x400 mm, matt finished for outdoor area, jointed in neat cement slurry and pointed in white or coloured cement to match over and including15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. complete all as specified and directed. |
| 5 | M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 6 | M&L for machine pressed precast concrete interlocking paver block, any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 grade with grey cement and pigment for path over and including 50 mm thick sand cushion complete all as specified and directed. |
| 7 | M&L for cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in bed blocks, copings, kneelers, apex stones, bed plates, lintels and the like etc complete all as specified and as directed. |
| 8 | M&L for 75 mm thick, PCC 1:2:4 type B1 using 20 mm stone aggregate as in plinth protection/hardstanding and finishing the surface even and smooth without using extra cement including demolition of cement concrete and removal of debrises from the premises complete all as specified and directed. |
| 9 | M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade \"A\" complete all as specified and directed. |
| 10 | Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, masonry, brick work, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 11 | S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh similar work confirming to Fe-290 Gde E-165 etc all as specified and directed. |
| 12 | Excavating in post holes in any type of soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including removing of surplus soil complete all as specified and directed. |
| 13 | M&L for plain cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundations, filling in and mass concrete complete all as specified and directed. |
| 14 | Dismantling fencing wire mesh , any type and size complete all as specified and directed. |
| 15 | S&F for GI chain link fencing of size 50x50mm, wire dia 2.4 to 4mm, 60 GSM including providing of binding wire complete all as specified and directed. |
| 16 | S&F mild steel round bars, 10 mm dia and overincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips securing chain link fencing complete all as specified and directed. |
| 17 | S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and directed. |
| 18 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of old brick or stone work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 19 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 20 | M&L for moorum in returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and directed. |
| 21 | Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all asspecified and directed. |
| 22 | M&L for mild steel, TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 23 | Use and waste formworkto sides of concrete foundation, footing, base of column, raft, raft beam sides and soffits of foundationand, walls, plinth beam for rough finishedsurfaces of concretecomplete all as specified and directed |
| 24 | M&L for reinforced cement concrete type B1 1:2:4 (nominal mix) using 20mm graded stone aggregate on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like including demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed. |
| 25 | M&L for 15 to 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admiture of pigment to matchwith shade of granite over and including 15 mm thick cement mortar for screed bed or bed layer complete all as specified and directed. |
| 26 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 27 | M&L for steel gate, including pintle hinges, stops, hand-made sliding bolts, etc. framed work, forged into spikes; framed guard bars, barred iron doors, and drilled forfixing of steel sheeting or other covering similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 28 | S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weldedtubes conforming to I. S.11611979 grade St.-24 complete all as specified and directed. |
| 29 | M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed. |
| 30 | M&L for15mm thick rendering in CM 1:6 faces of brick or concrete surfaces finished fair, even and smooth without using any extra cement including taking down cement plaster on brick or stonewall, raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description complete all as specified and directed. |
| 31 | M&L for15mm thick rendering in CM 1:4 faces of brick or concrete surfaces mixed with water proofing compoundfinished fair, even and smooth without using any extra cement complete all as specified and directed by Engr in Charge. Note :- Water Proofing compound shall be measured and paid seperately. |
| 32 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl prep of new surface. complete all as specified and directed. |
| 33 | M&L pre painted galvalume aluminium zinc coating GI based corrugatedsteel sheet of 0.50 mm thick (AZ-150) of an colour having tensil strength of 550/Mpa as in roof covering/cladding to wall/ ridge,fixed with self tapping screw/L type or J type cranked hook boltsincluding dismantlingplain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings/wall cladding complete all as specified and directed. |
| 34 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws including dismantlingplain or corrugated steel sheeting,any gauge, thickness, including nainital or similar pattern roof coverings/wall cladding complete all as specified and directed. |
| 35 | M&L for walling of random, rubble masonry brought in coursebuilt in CM 1:6including demolition of old stone work, built in cement mortar including all quoins, arches, pillars complete all as specified and directed. |
| 36 | All as per item no. 34 here-in-before but except stone |
| 37 | M&L forcement concrete 1:3:6 type D-2 (using 40 mm graded stone aggregate) as insurface channel and drains complete all as specified and directed. |
| 38 | Deduct Schedule of credit (calculation will be done off line) Rs. 83125.00 |
