|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level,complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. |
| 3 | M & L for brick work using old size sub class \"B\" brick, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed. |
| 4 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in cement mortar 1:4 onfair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 200 ml per bag cement of 50 kg (by weight) of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid for separately. |
| 6 | M&L for rendering 15 mm thick in cement mortar 1:6 onfair face of brick work of walls, finished even & smooth without using extra cement,complete all as specified and directed. |
| 7 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement,complete,all as specified. |
| 8 | Supply only a liquid integral water proofing compound, ISI Marked. |
| 9 | Dismantling of existing roof treatment of any description and any thickness upto PCC padding complete including removal of debris away from the site complete all as directed |
| 10 | M&L PCC 1:2:4,type B1 using 20 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete all as specified and directed. |
| 11 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 mixed with water proofing compound (ISI marked) @ 200 ml per bag cementof 50 kg or as per manufacturer’s instructions, w/o using extra cement complete allas specified. Note :- Supply only water proofing compound shall be measured and paid for separately. |
| 12 | Providing and applying single component PU Magnum solvent base Pure polyurethane liquid membrane for the concrete roof surfaces in two coats @1.85kg/ sqm and mixing ratio of hardener and base is 95:05 and consisting of a coat of two component epoxy primer in ratio of 1:1 (one part of resin and one parts of hardner) at a consumption of 0.200kg/sqm The vital physical and chemical parameters shall be as under : Min Elongation at break of 500% as per ASTM D2370 and tensile strength of 3.0 N/mm2 as per ASTM D2370, Crack Bridging ability greater than 3mm as per C1305 ,Water Impermeability on coated concrete @7 bar as per DIN1048,Water vapor permeability 0.72 perms as EN ISO 7783-2 . The material shall be applied with brush and it should be tested according to EN 1504-2 as a coating for surface protection for concrete, complete in all respect as per the direction of Engineer-in-charge. |
| 13 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over a coat of min 1mm thick putty complete,all as specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of ceilings and applying two coats of oil emulsion distemper (OBD) on ceiling of approved shade/tint over a coat of primer over a coat of min 1mm thick putty completeall as specified and directed. |
| 15 | M&L for complete removal of existing treatment from wall applying two coats of oil bond distemper (OBD) over a coat of primer over a coat of wall care putty (2 mm thick) to make surface even and smooth, and complete all as specified and directed. |
| 16 | M&L for preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint complete,all as specified & directed. |
| 17 | M&L for complete removal of exisiting finish/preparing plastered surface (with mechanical sander machine) on walls and applying exterior grade water proof putty of min 1 mm thicknessto prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine . |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 19 | M&L for Non skid Premium quality (1st quality) coloured ceramic tiles 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in floor over and includingscreed bed 15mm thickin CM 1:6 or beding layer for laying floor finishesetc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed. |
| 20 | M&L for Premium quality (1st quality) coloured, glazed, ceramic tiles 450x300/600X300X7mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:4, complete all as specified & directed. |
| 21 | S&F non skid Premium quality (1st quality) tiles, exterior grade, any pattern of size 300x300mm/ 400x400mm 10-12 mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed. |
| 22 | M&L for grooved anti slip for swimming pool coloured ceramic tiles 10 to 12 mm thick any shape and size as directed as in floor over and includingscreed bed 15mm thickin CM 1:6 or beding layer for laying floor finishesetc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed. |
| 23 | M&L for 18-20 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like, over 15mm thick screed bed in cement mortar (1:6) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite and rounding the edges and making holes for gas pipe as required , after dismantling of old granite complete all as specified and directed.(Shade and colour to be approved by GE) |
| 24 | M & L for 40 mm thick cement concrete type B0, 1:2:4 (12.5mm graded aggregate) as in flooring and similarcomplete all as specified and directed. |
| 25 | M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and as directed. |
| 26 | S&F in repairs galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 27 | S&F in repairs galvanized steel water tubing medium grade of 20mm bore ISI marked of approved make with & including all new fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 28 | S&F in repair viterous china wash down water closet pan (Pedestal pattern) with \"P\" or \"S\" trap including connection to trap, flushing pipe, anti syphonage pipe and cistern and S& F WC seat cover closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device and finallymaking good disturbed surface of floor complete all as specified and directed. |
| 29 | S&F in repairs PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified. |
| 30 | S&F in repairs vitreous china wash hand basin countersunk, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. |
| 31 | S&F in repair Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 32 | S&F 40 mm bore Brass chromium plated bottle traps of approved make for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified. |
| 33 | S&FPVC connection 450 mm long of approved make suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed. |
| 34 | S&F in repairs long body 15mm bore bib tap, fancy type, chromium plated of approved make, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified & directed. |
| 35 | S&F in repairs CP angle valve, fancy type long body of approved make for 15 mm bore pipe with capstan head long screwed shank including cp cover platecomplete all as specified & directed. |
| 36 | S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down of approved make, high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete,all as specified & directed. |
| 37 | S&F in repair 15mm borefancy type two way CP Brass Bib tapswith capston head, screwed downof approved make, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 38 | S&F in repair chromium plated brass single hole basin mixer with hot and cold arrangement with long shank and cupISI marked of approved make suitable for 15mm bore pipe complete,all as specified & directed. |
| 39 | S&F in repair chromium plated brass wall mixer 2 in 1 (L-bend type) with hot and cold arrangement with cups suitable for 15mm bore pipe complete,all as specified & directed. |
| 40 | S&F in repairs CP brass tubular towel rail,20mm dia, ‘D’ type, 60cm long between flanges of approved make, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified. |
| 41 | S&F 5.5 mm thick bevelled edge mirror of selected quality of approved make fixed to wall with stainless steel spacer stud, stand off screws, size of stand off screw shall be min 25 x 25 mm complete all as specified and directed. |
| 42 | S&F in repair CP brass health faucet of approved make not exc 1.25 m long flexible tube including wall hook complete all as specified and directed. |
| 43 | S&F in repair soap dish, of stainless steel of approved make complete,all as specified & directed. |
| 44 | S&F in repair toilet paper holder, brass chromium plated of approved make fixed to walls with chromium plated (CP) brass screws complete,all as specified & directed. |
| 45 | S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified. |
| 46 | S&F in repairs 22-25 mm dia stainless steel curtain rodincluding brackets and fancy type finials, complete, all as specified and directed. |
| 47 | Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store |
| 48 | S&F 110mm bore PVC (SWR) pipes 6 Kg/CM2 pressure ratingsingle socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, completeall as specified and directed. |
| 49 | S&F 110mm bore PVC (SWR) pipes 6 Kg/CM2 pressure rating single socketed in any length with rubber ring joints laid in trenches or in floors, completeall as specified and directed. |
| 50 | S&F 75mm bore PVC (SWR) pipes 6 Kg/CM2 pressure ratingsingle socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, completeall as specified and directed. |
| 51 | S&F 75 mm bore PVC (SWR) pipes 6 Kg/CM2 pressure rating single socketed in any length with rubber ring joints laid in trenches or in floors, completeall as specified and directed. |
| 52 | S&F 75 mm PVC (SWR) floor trap, plain with CP grating, with or without hole including jointing with solvent cement complete all as specified and as directed. |
| 53 | S&F 110mm bore PVC (SWR) bend, ISI marked any radius, completeall as specified and directed. |
| 54 | S&F 75mm bore PVC (SWR) bend, ISI markedany radius, completeall as specified and directed. |
| 55 | S&F 100mm bore PVC (SWR) junction single (Single T) equal or unequal ISI marked complete all as specified and as directed. |
| 56 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal ISI marked complete all as specified and as directed. |
| 57 | S&F 110mm bore PVC (SWR) vent cowl, ISI marked completeall as specified and directed. |
| 58 | S&F ABS body swimming pool overflow gratings/channels/strips single pin 250mm wide complete all as specified and as directed. Make as approved make. |
| 59 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete,all as specified & directed. |
| 60 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqmeach, complete,all as specified & directed. |
| 61 | Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing in same opening after necessary easing, adjusting and repairs complete all as specified and directed. |
| 62 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 63 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete all as specified and as directed. |
| 64 | Providing and fixing factory made uPVG white colour Sliding window Three track area not exceeding 2 sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 65 | S&F 150mm size stainless steel fancy type handle, complete all as specified and directed. |
| 66 | S&F butt hinges of size 100 mm medium weight, stainless steel ISI class \"B\" marked complete all as specified. |
| 67 | S&F 200 mm long stainless steel tower bolts of extruded section (ISI marked) complete all as specified |
| 68 | S&F 100mm double legged door stopper of stainless steel with rubber base all as specified and directed by Engr-in-charge. |
| 69 | S&F 300 mm long stainless steel sliding door bolts, fancy type, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified. |
| 70 | S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed. |
| 71 | M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified |
| 72 | S&F peg set of 6 stainless steel fancy type,min length 600 mmall as specified & directed. |
| 73 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 74 | M&L for RCC 1:2:4 type B1 (using 20 mm graded aggrigate) as in slab, chajjas, beam span exceeding 1.5 metre etcand similar suspended works complete,all as specified and directed. |
| 75 | Use and waste for Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick, flat rough finished surface of concretecomplete,all as specified and directed. |
| 76 | M&L for TMT bars 10mm dia and overcut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 77 | S&F factory made WPC single extruded 100% lead free ISO certified board of 18mm thick bothside pre laminated shutter for cupboards and similar works, the laminated shutter should be .12-.14 microne pre laminated side with laminated color and other side same laminated color of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company. All the edges shall be covered with 2 mm thick edge moulding tape or 90 degree edge bend finish. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity incl demolition of old boardings any type complete all as specified and directed. |
| 78 | S & F 100 mm size , stainless steel matte finish Handlesfixed with screws complete all as specified and as directed. |
| 79 | S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed |
| 80 | S & F 100mm size Stainless steel matte finish hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
