|
| 1 | Schedule \"A\" |
| 2 | Demolition of cement concrete in any position and any description not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.Note: The rate includes disposal off Unserviceable items/debris/ spoil obtained from demolition, breaking & dismantling by the contractor outside MoD defence land as directed. |
| 3 | Demolition of stone slabs and tiles precast concrete articles like paver block, chequered tiles, parking tiles etc., of any description or thickness in floors aprons etc laid dry or laid dry and pointed, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolition of reinforced cement concrete, (reinforcement cut to require to facilitate demolition), complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of dressed stonework, precast concrete articles and precast concrete block walling, etc., complete all as specified and directed by Engineer-in-Charge.Note: The rate includes disposal off Unserviceable items/debris/ spoil obtained from demolition, breaking & dismantling by the contractor outside MoD defence land as directed. |
| 6 | Material & Labour for precast cement concrete block masonry (1:3:6) type C-1 (using 20mm graded stone aggregates) with solid blocks, exceeding 10 cm in width and setting in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for Plain Cement concrete 1:4:8, type D-2 (using 40mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & Labour for 10mm thick rendering on fair faces of stone work or concrete surfaces in cement mortar 1:4, finished even and smooth w/o using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & Labour for rendering on concrete/brick surfaces 15mm thick in Cement Mortar 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.Note:- WPC measured and paid separately. |
| 11 | Supply only integral water proofing compound, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & Labour for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for Plain Cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material & Labour for pre-cast RCC concrete 1:2:4, type B-1 (using 20mm graded aggregate) as in manhole cover, slabs set in Cement Mortar 1:4 and finished all exposed surfaces of concrete even and fair without using extra cement for manholes and drains etc., complete all as specified and directed by Engineer-in-Charge. |
| 15 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement mortar 1:2:4 type B1, (using 20mm graded stone aggregate) smooth finished and reforming, benching as required, internal dia of pipe 150mm, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Demolition and breaking up to 150mm dia drain pipes below ground level (salt glazed stoneware, AC or reinforced concrete) set in cement mortar including PCC at any depth, complete all as specified and directed by Engineer-in-Charge.Note: The rate includes disposal off Unserviceable items/debris/ spoil obtained from demolition, breaking & dismantling by the contractor outside MoD defence land as directed. |
| 17 | Supply & Fixing 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars, including all levelling, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material & Labour for concrete bed to drain pipe 150mm dia bore including packing under and complete surrounding pipe with cement concrete 1:3:6, type C-2, after they are laid and tested, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Maintenance and cleaning of blockage manually by rodding, pumping, etc for Water Closet (Indian or European) Nahani/ floor traps, Soil/ waste pipe running on external wall of building and in trenches with fitting bends junction etc., Gully traps, manhole of all description and removing the deposited sludge/ solid/ liquid material, outside MD land, complete all as specified and directed by Engineer-in-Charge. |
| 20 | De-silting of septic tank any size including cleaning and taking out mud/ sludge, scum, silt (both organic and inorganic nature) from septic tanks by mechanical means of any depth, in foul conditions and confined places, getting out and removing the Sludge/ Sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land as directed by Engineer-in-Charge, complete all as specified and directed by Engineer-in-Charge.Note:Quoted rate of tenderer is deemed to be inclusive of dewatering as required and nothing extra shall be admissible to the contractor on this account. |
| 21 | Dewatering of Soakage Well any size including cleaning and taking out sludge water from soakage well by mechanical means of any depth, in foul conditions and confined places, getting out and removing the Sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land as directed by Engineer-in-Charge, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and labour for cleaning & clearing of underground sewage line (including manholes by taking off manhole covers and re-fixing the same after cleaning) of any description, underground any depth by removing any type of blockage including de-silting and de-chocking and flushing after cleaning including clearing of manholes (Sludge/ sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land as directed by Engineer-in-Charge, from upto 150mm dia sewage lines, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Excavating in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for foundation and getting out in soft/ loose soil, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc in soft/ loose soil, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Removing excavated soil to a distance exceeding 250 Metre but not exceeding 500 Metre and depositing where directed, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and labour for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in copings, bed plates, fixing of hold fasts and other similar works and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of necessary form work, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips, complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & Labour for 75mm thick plain cement concrete B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement, complete all as specified and directed by Engineer-in-Charge.Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item. |
| 29 | Supply & fixing chromium plated waste fitting 40mm bore for kitchen sinks fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & fixing chromium plated waste fitting 32mm bore for basin fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & fixing 15 mm bore stop valve/angle cock, cast copper alloy, chromium plated, fancy type, heavy duty, screwed down, screwed for iron pipe, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fixing two way bib cock without flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & fixing 25mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.75 kg as approved, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply & fixing 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed foriron pipe or brass ferrule of ISI marked and minimum weight not less than 0.45 kg as approved, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply & Fixing Wall mixer (Two in One) for mixing hot & cold water screwed down for iron/PVC pipe, fixed as in repair, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & fixing chromium plated shower rose with or without swivel joints 125mm dia including fixing to steel pipe, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & fixing toilet paper holder with flat recessed type stainless steel, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & fixing 100mm dia chromium plated grating fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply & fixing of PVC waste down pipe of 40mm bore for sink, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & fixing of PVC waste down pipe of 32mm bore for basin, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc., set with concrete and making good to floor including taking down existing, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & Fixing sinks made of stainless steel sink of 1mm thick sheet, kitchen or laboratory with plug washer and waste pipe including bedding in cement mortar 1:6 on to draft wall of including fixing cantilever brackets and connecting unions of size not less than 600 x 450 x 200 mm fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & Fixing in repairs vitreous china pedestal pattern, \"EWC\"570 x 460 x 380 mm white with \"P\" or \"S\" trap andincluding connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete, in repair, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply & Fixing in repairs white Vitreous china Urinal, Half stall type of size 420 x 395 x 635 mm (minimum) with grating and union for 50 mm discharge pipe (excluding flushing cistern) but including urinal pipe fixed to wall in CM 1:2 and pointing around urinal and connected to cistern and flush pipe including union and grating for discharge pipe and anti-bacterial, aesthetically designed, rust proof jet spray, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & Fixing in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal, complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing brass chromium plated tubular towel rail 20mm dia \"D\" type 60 cm long between flanges, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Material & Labour for cleaning and removing all scale and dirt from RCC / PVC tank by emptying, drying, cleaning by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and re-fixing inlet and outlet pipe with new tank connection fitting in the same position after cleaning (capacity of tanks exc. 500 ltrs and n. exc. 1000 ltrs) and mark the date of cleaning on the tank with paint, complete all as specified and directed by Engineer-in-Charge.Note:- \"Writing letter or figures (Block. Roman) on service water tank of 5 cm high and min 5mm wide such as \"CLEANED ON DD/MM/YY\". |
| 48 | Supply & fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, connecting up pipes, securing access covers etc. all as specified in SSR Part I, Capacity 1000 litres, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply & fixing PVC cover for water tank capacity exc. 500 litres but n. exc. 1000 litres including fixing new MS hinges and staples made for purpose, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply & fixing Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or re-fixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply & Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & Fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing in repairs, PVC (SWR) branch piece, (single Y equal or unequal) suitable for 110mm bore pipes, complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & Fixing 75mm dia PVC (SWR) bends with oval accessed door with rubber ring joints fixed as required, complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply & Fixing 110mm dia PVC (SWR) bends with oval accessed door with rubber ring joints fixed as required, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply & Fixing 75mm dia PVC (SWR) junction double, (double T), equal or un equal with oval accessed door including jointing with solvent cement as required, complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply & Fixing 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accessed door including jointing with solvent cement as required, complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply & Fixing 110mm dia PVC (SWR) reducer, single, equal or un equal of any length including jointing with solvent cement as required, complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & Fixing in repairs PVC (SWR) floor trap of 75mm outlet dia, plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge. |
| 61 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed by Engineer-in-Charge. |
| 62 | Material & Labour for 100mm thick (average) PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base,complete all as specified and directed by Engineer-in-Charge. |
| 63 | Material & Labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer, complete all as specified and directed by Engineer-in-Charge. |
| 64 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge. |
| 65 | Material & Labour for Dura paved Chequered cement concrete tiles 30cm x 30cm x 8-10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments, complete all as specified and directed by Engineer-in-Charge. |
| 66 | Material & Labour for screed bed or bedding layer of mortar 15mm thick for laying floor finishes as in Cement Mortar (1:6), complete all as specified and directed by Engineer-in-Charge. |
| 67 | Material & Labour for removing of RCC cover to cleaning and de-silting of existing storm water drain and making functional, complete all as specified and directed by Engineer-in-Charge. |
