|
| 1 | 75mm dia full teeth SS jublee clamps Make: Any reputed make |
| 2 | RED OXIDE PAINT MARINE TYPE, 4 LTR TINS,ANY REPUTED MAKE. |
| 3 | 6mm thk x 1mtr x 2mtr pure neoprene rubber joint for marineapplications ( sample to be submitted for approval along with technical bid) |
| 4 | M16x 65mm Long 10.9Gr. Hot dipped galvanized(70 microns)HT bolt & nuts with washers(full thread) |
| 5 | Pure neoprene rubber joint 3 mm thk x 1mtr x2mtr long for marine applications |
| 6 | 8mm dia x 1.5mm thk straight annealed seamless copper pipe(MTC to be submitted) |
| 7 | 15mm dia female threaded GI sockets (heavy duty) with GI HEX dummy plug |
| 8 | 25mm dia female threaded GI sockets (heavy duty) with GI hex dummy plug |
| 9 | 15mm dia sch80 x 150mm long GI barrel nipple both sides threaded(heavy duty) |
| 10 | 25mm dia sch80 x 150mm long GI barrel nipple both sides threaded(heavy duty) |
| 11 | 3/8\" dia male x 8mm dia ermitto fittings with ferrols, brass |
| 12 | 1/2\"dia male x 8mm dia ermitto fittings with ferrols(brass) |
| 13 | 8mm dia straight brass ermitto fittings with bothsides ferrols |
| 14 | 10mm dia straight brass ermitto fittings with bothsides ferrols |
| 15 | 3/8\" dia female x 8mm male with ferrol ermitto fittings, brass |
| 16 | 1/2\" dia female x 8mm dia male brass ermitto fitting with ferrols |
| 17 | M12x60mm long GI full threaded bolt & nuts |
| 18 | NW15 hot dip galvanizing B-type U clamps withou support angle |
| 19 | NW20 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 20 | NW25 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 21 | NW32 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 22 | NW40 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 23 | NW50 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 24 | NW65 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 25 | NW80 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUTSUPPORT ANGLE |
| 26 | NW100 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 27 | NW125 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 28 | NW150 HOT DIP GALVANIZING B-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 29 | NW200 HOT DIP GALVANIZING C-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 30 | NW250 HOT DIP GALVANIZING C-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 31 | NW300 HOT DIP GALVANIZING C-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 32 | NW350 HOT DIP GALVANIZING C-TYPE U -CLAMPS WITHOUT SUPPORT ANGLE |
| 33 | NON-ASBESTOS GASKET( OIL JOINT) 1.5MM THKX 1.5MTR X 2MTR style 59 (MTC TO BE SUBMITTED) |
| 34 | NON-ASBESTOS GASKET( OIL JOINT) 3MM THKX 1.5MTR X2MTR style 59 (MTC TO BE SUBMITTED) |
| 35 | M.S ANGLES (IS 2062 GRADE \"A\") SIZE: 25mm X 25mm X 4mm thk. |
| 36 | MS Angle,Size:40mm X 40mm X 5mm Thk( ISO 2062 Gr.A or EQualent). |
| 37 | M.S ANGLES (IS 2062 GRADE \"A\") SIZE: 50mm X 50mm X 5mm thk |
| 38 | M seal |
| 39 | 20MM WIDTH TEFLON TAPESX 10MTRS LONG |
