|
| 1 | Excavation in post holes ( or similar holes)in soft/loose soil each n.exc 0.50cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50mtr and making good surfacecomplete all as specified and as directed. |
| 2 | M&L for PCC 1:3:6 type C-2 (suing 40 mm graded stone aggregate in foundation,filling and mass concrete including sub base of floors complete all as directed and as specified |
| 3 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe 410 -W (Gde E- 250) quality A all as specified & directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile str of 550Mpa as in roof covering/cladding to walls,fixed with self tapping screws as specified |
| 5 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces including preparation of new or previously untreated surfaces of any description and at any position complete all as specified and directed |
| 6 | Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil.complete all as specified and directed. |
| 7 | M&L for 100mm thick PCC 1:4:8 type D-2(40mm graded stone aggregate) for sub base complete all as specified and directed. |
| 8 | M&L steel work conforming to Fe 410-0 or Fe 310-0 in posts and struts in fencing including cutting tops to shape as directed,drilling holes, notching for wire,etc: flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting,etc complete all as specified and directed by Eng-in-Charge |
| 9 | M&L for mild steel screw bolts(machine made) with hexagonal or square heads at one and screwed the other , or screwed both ends,each screwd end to be fitted with wahsers and one hexagonal or square not 5 cm long dia of neck 11 to 15 mm complete all as specified and directed |
| 10 | S&F steel work as for post including guest plate of suitable size welded at both ends for anchoring and for fixing of purlin and rafter including special shaped washers etc complete all as specified and directed. |
| 11 | S&F rolled section as in main and cross beams,hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding door etc conf to Fe 410-w complete all as specified and directed. |
| 12 | M&L Providing cement concrete , Type B0 1:2:4 (12.5 mm graded aggregate ) in roof kerbs or mud stops,rounded or chamfered on edges ,in lintels upto 1.5m clear span,cills ,steps; seismic and other similar bands, plinth courses,string courses,lacing courses,parapets and railings upto 60 cm in height ,copings ,kneelers ,apex stones, bed plates, kerbs slightly rounded or chamfered angles and throating, complete all as specified and direced. |
| 13 | S&F powder coated(min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm ( sectioncode 20617),top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and botttom size 40x18x1.5(section code 20736), interlock size 40x18x1.45 ( section code 20737), side/ middle size 40x18x1.55,( section code 20738) including necessary joining cleats, glazing clips rubber backing ,anodised aluminum snap beading screw, anodised aluminum fitting complete as per site requirtement glazing by using 5mm thick plain sheet glaassand ss wiremess of dia 0.36mm and aperture 1.4mm thick all as specified and directed.Note- 1. Glazed shutter glass thickness not less than 5mm and ss wiremess shutter with ss wiremesh as approved by GE is also included.No payment will be made separately.2. No extra payment will be made for section profiles of higher sizes. |
| 14 | S&F 50 micron powder coated for aluminium anodized grill size 6mm dia of aluminium bar mesh size 75mmx75mm and fixed to aluminium window ventilator complete all as specified and direced. |
| 15 | S&F powder coated aluminum ventilator (louvers) shutter with 3.8mm thick plain/tinted glass consisting of frame of size 63.5x44 and shutter section weighing not less than 0.55kg/m with locking arrengement as approved fixed including necessary joining cleats ,glazing clips, rubber packing powder coated aluminium snap beading screws, powder coated aluminium fittings with stainless wiremesh of 0.36mm including nesessary fixing arrangement complete all as specified and direced. |
