|
| 1 | कार्य मे प्रयुक्त होने वाली सामग्री की ढुलाई विवरण (Exclusive GST) |
| 2 | Carriage of PCC Poles from Store to Site (0-90KM) |
| 3 | Carriage of STP Poles from Store to Site (0-90KM) |
| 4 | Carriage of 11KV XLPE CABLE from Store to Site (0-90KM) |
| 5 | Carriage of 63 KVA Distribution Transfomer With Loading And Unloading Charges From Store to Site (0-90KM) |
| 6 | Carriage of 25 KVA Distribution Transfomer With Loading And Unloading Charges From Store to Site (0-90KM) |
| 7 | Carriage of Line Material and Acessaries Items from Store to Site (0-90KM) |
| 8 | fo|qr ra= LFkkiuk@fMLesaVy dk dk;Z (Exclusive GST) |
| 9 | Erection of single support ST/PCC pole for construction of 11 KV/LT line including digging of pit, fitting of all accessories, back filling of earth & others required work. |
| 10 | Erection of Double support ST/PCC pole for Distribution Transformer including digging of pit, fitting of all accessories, back filling of earth & others required work. |
| 11 | Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost) |
| 12 | Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost) |
| 13 | Stringing & sagging of 3 phase 11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering |
| 14 | Installation of Distribution Transformer at Double Pole with Proper Earthing of Neutral and Body Earthing |
| 15 | Painting of STP Poles with Red Oxide and Aluminum Paint |
| 16 | Hanging of 11KV Xlpe Cable With Special Designed Holding Clamps Provided By Contractor |
| 17 | Making of ID/OD Jointing/Termination Kit |
| 18 | dk;Z gsrq vko\";d fodsUnzh;d`r lkexzh (Exclusive GST) |
| 19 | T-OFF CHANNEL |
| 20 | CLAMP WITH NUT BOLT |
| 21 | TOP CHANNEL 100*50*2240MM |
| 22 | CLAMP FOR TOP CHANNEL |
| 23 | DROPPER CHANNEL 100*50*2000MM |
| 24 | CLAMP FOR DROPPER CHANNEL |
| 25 | S/S BASE ANGLE 75*75*6*2028MM WITH NUT BOLT |
| 26 | AL LUG 70SQMM |
| 27 | MS HOLDING CLAMP FOR XLPE |
| 28 | ALUMINIUM PAINT(L) |
| 29 | M/S GAURIDING ANGLE |
| 30 | GAURDING CLAMP |
| 31 | M/S GI EYE BOLT |
| 32 | G.I.WIRE 8.0MM |
| 33 | G.I.WIRE 6MM |
| 34 | RED OXIDE(L) |
| 35 | 11 KV CROSS ARM HOLDING CLAMP |
| 36 | F- BRACKET |
| 37 | JOINTING KIT INDOOR TYPE(3*70SQ MM) |
| 38 | JOINTING KIT OUTDOOR TYPE(3*70 SQ MM) Please Enable Macros to View BoQ information |
