|
| 1 | REGISTRAR ROOM: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer)10\" Height Aluminum Partition |
| 2 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 3 | Supply & Fixing of Registrar Table of size 2400mmx900mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding. & modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding. Side Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle(As per the Drawing) (Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 4 | Supply & Fixing of Excecutive High Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels provided with Head rest. |
| 5 | Supply & Fixing of Executive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels |
| 6 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 7 | Supply of L Type Sofa Seater |
| 8 | Supply of Teapaw of size 900mmx600mmx400mm |
| 9 | PA ROOM: Supply & Fixing of PA Table of size 1800mmx900mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding. & modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding. Side Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding. legsmade up of 25mm thick prelaminated particle board & Modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle.(Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 10 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels |
| 11 | Supply & Fixing of Medium Back Chair Back made up of mesh and seat made up of mouldedcushion , PVC armrest With pushback ,hydraulic Height adjustment , Metal base with 5 twin caster wheel. |
| 12 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 13 | Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer)10\" Height Aluminum Partition |
| 14 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 15 | VISITOR AREA: Supply & Fixing of Medium Back VC Chair: seat made up of Moulded cushion , Backrest made up of mesh,S type frame made up of 18 gauge round oil pipe duly powder coated after Necessary treatment provided with PVC armrest. |
| 16 | Office Room -Superintendent Room 1,2,3,5&6: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer)- 7\" Height Aluminum Partition |
| 17 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 18 | Supply & Fixing of Superintendant Table of size 1500mmx750mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding. & Modsty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding. Side Table of size 900mmx450mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle (Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 19 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels |
| 20 | Supply & Fixing of Medium Back Chair: Back made up of mesh and seat made up of mouldedcushion , PVC armrest With pushback, hydraulic Height adjustment, Metal base with 5 twin caster wheel. |
| 21 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 22 | Workstation Area: Supply & Fixing of Modular work station 60mm Thick Aluminum extruded 2mm Thick & powder coated sections, with choice of double “Tiles” of 9mm pre – Laminated board, fabric covers magnetic board, write & wipe white board with Provision for universal electrical data Cable management. Table top & Legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding provided with keyboard tray.(Per Seater of size 1500mmx1500mmx600mm) |
| 23 | Supply & Fixing of Mobile Pedestal of size 450mmx450mmx600mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with 3 draws, lock & Handle.Handle.(Lock & 4\" Handle make- Ebco, Telescopic channel make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 24 | Supply & Fixing of Medium Back Chair Back made up of mesh and seat made up of mouldedcushion , PVC armrest With pushback ,hydraulic Height adjustment, Metal base with 5 twin caster wheel. |
| 25 | Supply & Fixing of File Storage Unit of size 1560mmx450mmx1200mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 26 | Supply & Fixing of File Storage Unit of size 2010mmx450mmx1200mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 27 | Supply & Fixing of File Storage Unit of size 1260mmx450mmx1200mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 28 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle..(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 29 | Supply & Fixing of Computer Room Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 20mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws, lock & Handle.(Lock & 4\" Handle make- Ebco, Telescopic Channel make - Ebco)(PVC Beeding make - rehau)(IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 30 | Supply & Fixing of Medium Back Chair Back made up of mesh and seat made up of mouldedcushion , PVC armrest With pushback ,hydraulic Height adjustment, Metal base with 5 twin caster wheel. |
| 31 | Supply & Fixing of File Storage Unit of size 1200mmx450mmx750mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle..(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 32 | Supply & Fixing of File Storage Unit of size 950mmx450mmx750mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle..(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 33 | Supply & Fixing of File Storage Unit of size 740mmx450mmx750mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle..(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 34 | Dean Room 1: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer)- 10\" Height Aluminum Partition |
| 35 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 36 | Supply & Fixing of Dean Table 1 of size 2100mmx900mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm PVC beeding & modesty Made up of 18mm thick prelaminated particle board, duly edge banded with 1mm thick PVC beeding. Side Table of size 900mmx450mmx750mm top made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding. legsmade up of 25mm thick prelaminated particle board, duly edge banded with 2mm PVC beeding & Modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle.(Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 37 | Supply & Fixing of Excecutive High Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels provided with Head rest. |
| 38 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels. |
| 39 | Supply & Fixing of Associate Dean Table of size 1500mmx750mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board, duly edge banded with 2mm thick PVC beeding & Modsty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding. Side Table of size 900mmx450mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle (Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 40 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels. |
| 41 | Supply & Fixing of Medium Back Chair: Back made up of mesh and seat made up of mouldedcushion , PVC armrest With pushback ,hydraulic Height adjustment, Metal base with 5 twin caster wheel. |
| 42 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 43 | Dean Room 2,3,4 : Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer)- 10\" Height Aluminum Partition |
| 44 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 45 | Supply & Fixing of Dean Table of size 1800mmx900mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board, edge banded with 2mm thick PVC beeding& modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding. Side Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, duly edge banded with 2mm thick PVC beedinglegsmade up of 25mm thick prelaminated particle board, duly edge banded with 2mm thick PVC beeding & Modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle.(Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau)(IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 46 | Supply & Fixing of Associate Dean Table of size 1500mmx750mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duly edge banded with 2mm thick PVC beeding & Modsty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding. Side Table of size 900mmx450mmx750mm top made up of 25mm thick prelaminated particle board, duly edge banded with 2mm thick PVC beeding , legs made up of 25mm thick prelaminated particle board & modesty Made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle (Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau)(IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 47 | Supply & Fixing of Excecutive High Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels provided with Head rest. |
| 48 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels. |
| 49 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duly edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 50 | Conference Hall: Supply & Fixing of Conference Table of size 7200mmx1500mmx750mm top made up of 25mm thick, prelaminated particle board, duly edge banded with 2mm thick PVC beeding, legs & Modesty made up of 18mm thick prelaminated particle board duly edge banded with 1mm thick PVC beeding.(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 51 | Supply of 8M Electrical Popup Box (Without Switch, Sockets & HDMI Sockets ) [Make- Ebco] |
| 52 | Supply & Fixing of Medium Back Chair: Back made up of mesh and seat made up of molded cushion, PVC armrest With pushback, hydraulic Height adjustment, Nylon base with 5 twin caster wheels |
| 53 | Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer)- 10\" Height Aluminum Partition |
| 54 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
