|
| 1 | Dark Room: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10\" Height Aluminum Partition |
| 2 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 3 | Supply & Fixing of Slotted Angle Rack of size 108”(H) x 18”(D) x 36”(L) Angle made up of 14Gauge & Panel made up of 18Gauge,8 panels making with 7 Compartments duely powder coated after necessary treatment. |
| 4 | Chairman Table : Supply & Fixing of Chairman Table of size 1800mmx600mmx900mm top made up of 25mm thick prelaminated particle board, duely edge banded with 2mm thick PVC Beeding bottom legs of size 40x40x2mm MS pipe, Box made up 1.6mm Thick CR Sheet duely powder coated after necessary treatment provided with selves, door, Lock & Handle.(AS Per Drawing) (Lock & 4\" Handle make- Ebco,Telescopic Channel make - Ebco)(PVC Beeding make - Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction Formaldehyde Containing resins) |
| 5 | Valuation Table: Supply & Fixing of Valuation Table of size 900mmx600mmx750mm top made up of 25mm thick prelaminated particle board duely edge banded with 2mm thick PVC Beeding bottom legs of size 1\"x1\" MS pipe duely powder coated after necessary treatment provided with 10mm thick divider plain glass(Glass Make - Saint Gobain) with D brackets.(D Brackets Make - Ebco)(PVC Beeding make - Rehau), (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction Formaldehyde Containing resins) |
| 6 | Supply of Visitor chair seat and back made up of Moulded cushion andframe made up of 16 gauge round oil Pipeduely powder coated after necessary treatment, provided with PU arms.Dimension W59cmxD59cmxH85cm |
| 7 | Examanination Wing Office Room - Dark room: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10\" Height Aluminum Partition |
| 8 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 9 | Supply & Fixing of Slotted Angle Rack of size 108”(H) x 18”(D) x 36”(L) Angle made up of 14Gauge & Panel made up of 18Gauge, 8 panels making with 7 Compartments duely painted after necessary treatment. |
| 10 | Supply & Fixing of Chairman Table of size 1800mmx600mmx900mm top made up of 25mm thick prelaminated particle board, duely edge banded with 2mm thick PVC Beeding bottom legs of size 40x40x2mm MS pipe, Box made up 1.6mm Thick CR Sheet duely powder coated after necessary treatment provided with selves, door, Lock & Handle.(AS Per Drawing) (Lock & 4\" Handle make- Ebco,Telescopic Channel make - Ebco)(PVC Beeding make - Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction Formaldehyde Containing resins) |
| 11 | COE Room : Supply & Fixing of COE Table of size 2100mmx900mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm Thick prelaminated Partcle board, duely edgae banded with 2mm PVC beeding & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding. Side Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, duely edge banded with 2mm thick PVC beeding legs made up of 25mm thick prelaminated particle board & Modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle. Mobile Pedestal of size 450mmx450mmx700mm with attached 3 draws, lock & handle.(Lock & 4\" Handle make- Ebco, Soft Closing Channel make - Ebco)(PVC Beeding make - Rehau)(IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction Formaldehyde Containing resins added) |
| 12 | Supply & Fixing of Excecutive High Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels provided with Head rest. |
| 13 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels. |
| 14 | Supply & Fixing of Discussion Table of size 2400mmx1200mmx750mm Top made Up of 25mm thick plain pre laminated particle board duely edge banded with 2mm PVC beeding , bottom unit legs made up of 50mm x 50mmsquare pipe & long Connectingpipe on both side made up of 50x25mm and duely powder coated after necessary treatment, electrical wire box.(PVC Beeding Make- Rehau)(IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 15 | Supply & Fixing of Medium Back VC Chair: seat made up of Moulded cushion , Backrest made up of mesh,S type frame made up of 18 gauge round oil pipe duely powder coated after Necessary treatment provided with PVC armrest. |
| 16 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duely edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 17 | Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10\" Height Aluminum Partition |
| 18 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 19 | P.A & Clerk Cabin: Supply & Fixing of PA Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duely edge banded with 2mm thick PVC beeding.& modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding. Side Table of size 900mmx450mmx700mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm Thick prelaminated particle board duely edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 Drawer, 1 Open Shelf, Lock & Handle(Lock & 4\" Handle make- Ebco, Soft Closing Channel make - Ebco)(IS:1282) (PVC Beeding Make- Rehau) Rehau)(IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 20 | Supply & Fixing of Clerk Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 20mm thick prelaminatd particle boardduely edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 draws, lock & Handle.(Lock & 4\" Handle make- Ebco, Telescopic Channel make - Ebco) (PVC Beeding make - rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 21 | Supply & Fixing of Excecutive Medium Back Chair back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels. |
| 22 | Supply & Fixing of Modular work station 60mm ThickAluminum extruded 2mm Thick & powder coatedsections, with choice of double “Tiles” of 9mm pre – Laminated board, fabric covers magnetic board, write & wipe white board with Provision for universal electrical data Cable management.(Frame Size 1500mmx1200mm -2 Nos) |
| 23 | Computer Room :Supply & Fixing of Computer Room Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 20mm thick prelaminated particle board duely edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 draws, lock & Handle.(Lock & 4\" Handle make- Ebco, Telescopic Channel make - Ebco)(PVC Beeding make - rehau)(IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 24 | File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duely edge banded with PVC beeding provided with door, lock & Handle.(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 25 | Supply & Fixing of Medium Back Chair Back made up of mesh and seat made up of mouldedcushion , PVC armrest With pushback ,hydraulic Height adjustment, Metal base with 5 twin caster wheel.22x18x22 inches |
| 26 | Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10\" Height Aluminum Partition |
| 27 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 28 | Associate Dean Cabin : Supply & Fixing of Associate Cabin -1 :Table of size 1500mmx750mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duely edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding. Side Table of size 900mmx450mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board, duely edge banded with 2mm thick PVC beeding & modestyMade up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle.(Lock & 4\" Handle make- Ebco, Softclose Telescopic Channel make - Ebco)(PVC Beeding make - rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 29 | Supply & Fixing of Associate Cabin -2,3,4&5 Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 20mm thick prelaminated particle board duely edge banded with 2mm thick PVC beeding & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 draws, lock & Handle.(Lock & 4\" Handle make- Ebco, Telescopic Channel make - Ebco)(PVC Beeding make - rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 30 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels 680x990x680mm. |
| 31 | Supply & Fixing of Medium Back VC Chair: seat made up of Moulded cushion , Backrest made up of mesh,S type frame made up of 18 gauge round oil pipe duely powder coated after Necessary treatment provided with PVC armrest.22x18x38inches, Floor to seat height 17\" |
| 32 | File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duely edge banded with PVC beeding provided with door, lock & Handle..(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 33 | Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 7\" Height Aluminum Partition |
| 34 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 35 | Cluster Workstation Area: Supply & Fixing of Workstation Table of size 1500mmx1500mmx750mm top made Up of 25mm thick plain pre-laminated particle board duely edge banded with 2mm PVC beeding, bottom unit legs made up of 50mm x 50mm C Type square pipe & long Connecting pipe on both sides made up of 50x25mm and duely powder coated after necessary treatment, Electrical Wire Tray ,With 8mm Thick PU Glass, Side Metal Cover.(IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added)(PVC Beeding make - rehau) |
| 36 | Supply & Fixing of Mobile Pedestal of size 450mmx450mmx600mm made up of 18mm thick prelaminated particle board duely edge banded with PVC beeding provided with 3 draws, lock & Handle.(Lock & 4\" Handle make- Ebco, Telescopic Channel make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 37 | Supply & Fixing of Medium Back Chair 22x18x22\"Back made up of mesh and seat made up of mouldedcushion , PVC armrest With pushback, hydraulic Height adjustment , Metal base with 5 twin caster wheel. |
| 38 | A.RCabin : Supply & Fixing of AR Cabin Table of size 1500mmx750mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duely edge banded with 2mm thick PVC beeding. & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding. Side Table of size 900mmx450mmx750mm top made up of 25mm thick prelaminated particle board, duely edge banded with 2mm thick PVC beeding legs made up of 25mm thick prelaminated particle board & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 draws, Lock & Handle(Lock & 4\" Handle make- Ebco, Softclose Telescopic Channel make - Ebco)(PVC Beeding make - rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 39 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duely edge banded with PVC beeding provided with door, lock & Handle..(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Reghu) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 40 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels |
| 41 | Supply & Fixing of Medium Back VC Chair: seat made up of Moulded cushion , Backrest made up of mesh,S type frame made up of 18 gauge round oil pipe duely powder coated after Necessary treatment provided with PVC armrest. |
| 42 | Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 7\" Height Aluminum Partition |
| 43 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
| 44 | DC Cabin :Supply & Fixing of DC Table of size 1800mmx900mmx750mm top made up of 25mm thick prelaminated particle board, legs made up of 25mm thick prelaminated particle board duely edge banded with 2mm thick PVC beeding. & modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding. Side Table of size 1200mmx600mmx750mm top made up of 25mm thick prelaminated particle board, duely edge banded with 2mm thick PVC beeding legsmade up of 25mm thick prelaminated particle board & Modesty Made up of 18mm thick prelaminated particle board duely edge banded with 1mm thick PVC beeding provided with attached 3 draws,Lock & Handle.(Lock & 4\" Handle make- Ebco, Soft Close Telescopic Channel make - Ebco)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 45 | Supply & Fixing of File Storage Unit of size 900mmx450mmx1800mm made up of 18mm thick prelaminated particle board duely edge banded with PVC beeding provided with door, lock & Handle..(Lock & 4\" Handle make- Ebco, Hinges make - Ebco)(Board Make- Action Tesa)(PVC Beeding Make- Rehau) (IS 12823: E1 & E2 Emission Classes : Standard EN 13986 Construction where Formaldehyde Containing resins added) |
| 46 | Supply & Fixing of Excecutive Medium Back Chair: back made up of mesh and seat Made up of moulded cushion with Synchro tilting, hydraulic height adjustment, PU adjustable arm rest, and Metal base with 5 twin castor wheels 680x990x680mm. |
| 47 | Supply & Fixing of Medium Back VC Chair: seat made up of Moulded cushion , Backrest made up of mesh,S type frame made up of 18 gauge round oil pipe duely powder coated after Necessary treatment provided with PVC armrest.Dimension width 22\", Depth 18\", Height 38\", Floor to seat height 17\". |
| 48 | Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15\") with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 7\" Height Aluminum Partition |
| 49 | Aluminium doors shall be manufactured from high-quality aluminium alloy extruded sections (6063-T5/T6), straight, smooth, and free from defects. The door frame and shutter profiles shall have a minimum thickness of 1.5 mm, suitable for residential or commercial application as specified. The doors shall be powder-coated to a minimum thickness of 60–80 microns or anodized to a minimum of 15 micronsi n the approved colour and finish. Glazing shall be 5 mm or 6 mm Plain glass (clear), securely fixed with EPDM rubber gaskets and weather strips to ensure air and water tightness. All hardware, including hinges, locks, handles and accessories, shall be heavy-duty, corrosion-resistant and suitable for aluminium doors. Installation shall be carried out true to line, level and plumb with frames securely fixed using stainless steel fasteners and all joints sealed with neutral cure silicone sealant. The completed aluminium door shall be weather-tight, smoothly operable and finished to the satisfaction of the Engineer/Architect - size 900mmx2100mm |
