|
| 1 | Civil Works Items |
| 2 | Cement concrete in foundations, filling and mass concrete Type D2 1:2:4 (40 mm graded Aggregate) |
| 3 | M&L for providing RCC in Slabs supported on walls, beams and columns etc., roofs, landings, balconies, lintel, canopies, deck slabs and in shelves and the like with Type B0 1:2:4 (12.5mm graded aggregate) |
| 4 | Brickwork with sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar |
| 5 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls for water lines, electrical conduits etc. |
| 6 | S&F of Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite thickness of granite 15- 18 mm |
| 7 | M&L for Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 8 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each without taking off the shutters from frame |
| 9 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement with details provided. Details- 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with 5mm thick heat moulded PVC sheet ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. style width should not not be less than 75 mm and rails width should not be not be less than 100 mm complete with 03 nos of 100mmhinges, 01 aluminium locking bolt of size 250 mm length, 01 aluminium tower bolt of 200 mm , 02 aluminium handles and 01 door stopper etc as per direction of Engineer-in-charge, |
| 10 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including 5.0 mm thick frosted glass all complete as per approved drawing & direction of Engineer-in-Charge. |
| 11 | S&F of Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed with aluminium die cast body |
| 12 | M&L for Mild steel TMT bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as per directives of EIC |
| 13 | S&F of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, with105 mmx 60 mmx 1.25 to 1.60 mm thickness frame size and one coat of shop coat primer of red oxide or zinc chromate primer. |
| 14 | M&L for Cement concrete type B-2, 1:2:4 (40mm graded Aggregate) 100 mm thick and finishing surface even and fair |
| 15 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Jhonson, Kajaria, somany |
| 16 | S&F of Vitrified Ceramic anti skid / matt finish tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match make of tile Jhonson, Kajaria, somany |
| 17 | S&F of Vitrified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm, in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchJhonson, Kajaria, somany |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the Premises |
| 19 | Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with 1:6 cement mortar |
| 20 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 21 | Painting of steel surfaces of any description, over 10cm in width or girth,not otherwise described with preparation of new surfaces and painting with two coats of synthetic enamel paint |
| 22 | M&L for Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of bore 15 mm make of pipe Tata, Jindal, Surya |
| 23 | M&L for Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of bore 20 mm Tata, Jindal, Surya |
| 24 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, bore of pipe 15 mm |
| 25 | S&F of Stop valves, quarter turn, cast copper alloy chrome plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed bore dia 15 mm make- Jhonson, jaquar, kohler |
| 26 | S&F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 27 | S&F of PVC connections 15mm size with PTMT nuts of length 600mm |
| 28 | S&F of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore 110 mm including steel clamps at suitable interval for holding the pipe make – supreme, finolex, astral |
| 29 | S&F of PVC (SWR) bends any Radius of bore 110 mm make – supreme, finolex, astral |
| 30 | S&F of PVC SWR traps P or S type for 110 mm dia pipe make supreme, finolex, astral |
| 31 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100 mm bore pipe |
| 32 | S&F of PVC valveless, syphonic action type, flushing cistern 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and inlet and outlet pipes as requirement hindwware, jhonson, jaquar, parryware |
| 33 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers mirror make modiguard, AIS mirrors, saint gobain |
| 34 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm make jaquar, hindware, parryware |
| 35 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long Jaquar, hindware, parryware |
| 36 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 37 | Demolition of cement concreteof any description andin anypositionnot otherwise specifically provided for |
| 38 | M&L for laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed bituminous surface by forced application including applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m, sealing the joints by gas torch and bitumen and cleaning of surfaces before applying tack coat. End laps and side laps should not be less than 100 mm. APP’s Make IWL, STP, Asian paints |
| 39 | Rendering 15mm thickin CM1:6on fair faces of brick work or concrete surfaces. |
| 40 | Rendering 15mm thickin CM1:6on fair faces of brick work or concrete surfaces with finishing smooth without using extra cement. |
| 41 | Rendering 15mm thickin CM1:6on fair faces of brick work or concrete surfaces in ceilings with finishing smooth without using extra cement. |
| 42 | Preparing surfaces plastered or unplastered old surfaces on walls and ceilings and distempering walls with distemper oil emulsion two coats |
| 43 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces make Apex ultima, Berger weather coat, dulux weather shield |
| 44 | S&F of Chromeplated Bib taps, quarter turn, cast copper alloy fancy type and chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and Fixed 15 mm bore make jhonson, jaquar, kohler |
| 45 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, fixed with P or S trap complete including provision of lime concrete bedding and making all connections of inlet and outlet from flushing cistern and sewer pipes make of seat Jaquar, jhonson, hindware, parryware |
| 46 | S&F of Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make- hindwware, jhonson, jaquar, kohler |
| 47 | S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make- hindwware, jhonson, jaquar, kohler |
| 48 | Removing building materials etc. to a distance up to 500 meters or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
| 49 | S&F of half stall Urinal withAuto electric urinal flusher with built in Self flush infra-red sensor, Working water pressure- 0.05 MPa- 0.70 Mpa, Sensing range- 35 cm to 65 cm, Power- AC 220 Volt, 50 Hz, Dia of inlet/outlet pipe- 15 mm (1⁄2”), DPF at Pressure- 1 bar- 0.22 L, 2 bar -0.33 l, 3 bar- 0.40 L, Finish: Chrome plated, Suitable for wall or recessed mounting, Flexible supply hose of proper pressure rating if required, power input box, Powered by DC or AC, power adapter, necessary cutting and finishing of wall surface, as required for fixing of urinal flusher and any requirement of spool pipe, thread cutting, socket if required including all other accessories and removal of old urinal and shifting to stores complete in all respect. Make Hindware, EURONICS, JAQUAR, KOHLER |
| 50 | Providing and fixing of Hand Dryers as per manufacture\"s specification with all necessary fitting and fasteners etc. complete for operational condition to hold in position &orientation complete all, note: The Body Material Should be of Stainless Steel 304. Power 1150W to 1800W, RPM 20000, to 25000, blowing volume > 270 cum per hour, air speed 100 m/sec with inbuilt auto cutoff of 60 seconds complete in all respect including making electrical connections from existing points. Make; EURONICS, JAQUAR, KOHLER. |
| 51 | Providing and fixing of automatic soap dispensers screwed to wall with raw plugs and screws etc., complete in all respect for operational condition with Automatic Infra-Red Sensor, container Material of soap dispenser should be of 304 Stainless Steel withminimum capacity of 0.8 to 1.1 litre. including making electrical connections from existing points. Make- EURONICS, JAQUAR, KOHLER |
| 52 | Supply and fixing of Chromium Plated (CP) Automatic Sensor pillar Tap for wash basins with Infra-Red sensor system with 9 to 20 cm sensing range , electrically 230 volt ac or DC operated compete set for 15 mm nominal bore (having foam flow technology) with all associated material and work for complete fitting on slab for counter top wash basin make EURONICS, JAQUAR, KOHLER |
| 53 | Providing and fixing in position Chinaware European type one-piece white water closet with P trap or S trap as required with Rimless bowl design, flushing with Siphonic effect, Dual flushing system for 2.6/4.6 LPF, Anti germ glaze, seat cover, making connections and fixing in floor with all required accessories including PVC connection and chrome plated health Faucet with 1 Mtr Flexible Tube with Wall Hook complete in all respects. Make: Jaquar, Kohler, Hindware |
| 54 | S&F of Vitreous China counter top basin white with over flow cap and anti germ glazing of size 600X400x185 mm,oval shape including fixing in stone slab and making connections of the inlet and outlet with complete accessories as required for making it functional. make- hindwware, jhonson, jaquar, kohler |
