|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc. 1.5 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 sqm but n. exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed. |
| 4 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 5 | M&L for taking down and refixing in same opening wooden shutters exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc. complete all as specified and directed. |
| 6 | Dismantling stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortarts complete all as specified and directed. |
| 7 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 8 | Taking down old steel rolling shutters area n. exc 20 Sqm including accessories complete all as specified and directed. |
| 9 | S&F 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed. |
| 10 | Supply only Ball bearings for rolling shutters complete all as specified and directed. |
| 11 | Supply only Saftey lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 12 | S&F pressed steel frames (size-105X60mm) for doors with one rebate incl necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 13 | All as per item No 12 here-in-before but of size 125 x 60 mm complete all as specified and directed. |
| 14 | S&F framed work as in doors, gates or other sectionwith gusset plates, rails, braces etc. completedrilling for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete conforming to Fe 290 (Gde-E-165) complete all as specified and directed. |
| 15 | M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing and including form work complete all as specified and directed. |
| 16 | S&F Second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. |
| 17 | S&F Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, divided into squares edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats complete all as specified and directed. |
| 18 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 19 | M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 20 | S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 21 | S&F for anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 22 | S&F in repair anodised aluminium partition fixed type made from 101.60x44.45x1.5mm thick section fully glazed incl all necessary jointing cleat, glazing plate and clips, rubber, gasket packing, snap beading with 5.50mm thick glass tinted complete all as specified and as directed. |
| 23 | S&F for 12mm thick toughned glass door with all necessary stainless steel door handles, hinges, automatic floor door spring and including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed |
| 24 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 25 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 26 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 27 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 28 | S&F 100mm size of mild steelbutt hinges, medium weight, cold rolled complete all as specified and directed. |
| 29 | S&F Alumininum anodised, barrel tower bolts of extruded section 200 mm size complete all as specified and directed. |
| 30 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long complete all as specified and directed. |
| 31 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm complete all as specified and directed. |
| 32 | S&F in repairs 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed. |
| 33 | S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm complete all as specified and directed. |
| 34 | S&F in repairs Alumininum anodised, barrel tower bolts of extruded section 200 mm size complete all as specified and directed. |
| 35 | S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised 150 mm long complete all as specified and directed. |
| 36 | S&F in repairs 150 mm, double action spring hinges, mild steel with steel wire spring, stove enamelled, blackcomplete all as specified and directed. |
| 37 | S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple, beads on any type of door/windows complete all as specified and directed. |
| 38 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wdn beads in square n.exc 0.5 sq.m in each pane including hackingoutoldbrokenglass (anythickness,size,qualityordescription)fromany type of frames complete all as specified and directed. |
| 40 | S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty/wdn beads in square exc 0.5 sq.m in each pane including hackingoutoldbrokenglass (anythickness,size,qualityordescription)fromany type of frames complete all as specified and directed. |
| 41 | S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/ beads in square exc 0.5 sq.m in each pane including hackingoutoldbrokenglass (anythickness,size,qualityordescription)fromany type of frames complete all as specified and directed. |
| 42 | S&F Sheet glass 4mm thick ordinary quality and glazing with beading in squares n.exc 0.5 Sq.m in each pane complete all as specified and directed. |
| 43 | S&F Sheet glass 5.5mm thick ordinary quality and glazing with beading in squares exc 0.5 Sq.m in each pane complete all as specified and directed. |
| 44 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM 1:4 complete all as specified and directed. |
| 45 | M&L for Rounding to edges of granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 46 | S&F in replacement 18mm thick of integral PVC foam sheet manufactured by ISO:900, ISO:14001, ISO:18001 fixed with screw, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per directed by the Engineer-in-Charge (Density - 525 GM/CC) complete all as specified and directed. |
| 47 | S&F in repair Kitchen basket stainless steel size 435mmX510mm made of 4mm dia stainless steel wire of 202 grade, including stainless steel guide channel complete all as specified and directed |
| 48 | S&F in repair auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. |
| 49 | S&F in repairs 100 mm size Brass handles, cast type, polished bright complete all as specified and directed. |
| 50 | S&F in repair telescopic ball bearing slide of 450mm long 45mm width with three fold drawer channel to kitchen carsasscomplete all as specified and directed. |
| 51 | S&Fin repairs 40mm dia, cupboard/drawer knobs fixed with nut screw and washers of brass polished complete all as specified and directed. |
| 52 | S&F 605X605mm anodised aluminium snap grid frame work for false ceiling using main tee of size 25x35x1.5mm & cross tee of size 25x35x1.5mm, aluminium anodised angle section 25x25x1.5mm including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 53 | S&F PVC insulation panels of 10 mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed. |
| 54 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 55 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 56 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 57 | S&F in repairs cast iron door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 58 | S&F in repairs double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty complete all as specified and directed. |
| 59 | S&F in repairs stainless steel curtain rod 25mm dia (minimum weight 0.36 Kg/RM) with brackets, fancy knobs and stand etccomplete all as specified and directed. |
| 60 | Welding in repairs to any description of metal n. exc 2.5cm in length and thickness of welded n. exc 6mm complete all as specified and directed. |
| 61 | M&L in repairs 18/19 mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed. |
| 62 | M&L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails complete all as specified and directed. |
| 63 | S&F 75 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 64 | S&F Aluminium anodised Hasp and staple, safety type of size 75mm complete all as specified and directed. |
| 65 | M&L for preparing surfaces ofnew wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 66 | M&L for preperation of new steel surfaces over 10 cm in width or girth and applyingtwo coat of synthetic enamal paint over a coat of red oxide primercomplete all as specified and as directed. |
| 67 | S&F in repairs rubber based door strip fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width & lengthas required at site complete all as specified and directed. |
| 68 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 69 | M&L for preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
