|
| 1 | Replacement of following old broken unserviceable parts with new parts of Sofa Set 5 Seats/3 Seats FD-281,FD-373, FD/MAP-II/02. |
| 2 | Removing the existing u/s covers from detachable foam cushion and S&F new cover made out of superior quality tapestry cloth of approved quality (locally available), not less than Rs. 550/-per meter) duly stitched as per size of seat & one side be stitched with zip chain of approved quality complete all as specified & shown on drgs & approved by GE |
| 3 | S&F foam cushion 100mm thick and 40density, size 22”x21”x4” duly covered with new tapestry cloth & duly stitchedas per size of seat & one side be stitched with zip chain (of approved type/ design/colour) (not less than Rs. 550/- per mtr) of appropriate quality fixed as in repairs complete all as shown on drawing, specified & directed by Engr-in-charge, approved by GE. |
| 4 | Removing the existing u/s front legs from Sofa set 04/05seater and S&F new front leg made out of Teak Wood duly finished & complete to match the original as shown on drgs as directed |
| 5 | Removing the existing u/s Rear legsfrom Sofa set 04/05seater and S&F new Rear legs made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed |
| 6 | Removing the existing u/s Batton fromSofa set 04/05seaterand S&F new Battonmade out of Teak Wood duly finished and complete to match the original as shown on drgs as directed |
| 7 | Removing the existing u/s Long Rails from Sofa set 05seater and S&F new Long Rail made out of Teak Wood duly finished & complete to match the original as shown on drgs as directed |
| 8 | Removing the existing u/s Hand Rest from Sofa set 05seater and S&F new Hand Rest made out of Teak Wood duly finished & complete to match the original as shown on drgs as directed |
| 9 | Removing the existing u/s Short Rail from Sofa Single seater and S&F new Short Rail made out of Teak Wood duly finished & complete to match the original as shown on drgs as directed |
| 10 | French Polishing to Sofa Set 05 Seater |
| 11 | French Polishing to Sofa Set 03 Seater |
| 12 | Replacement of following old broken unserviceable parts with new parts of TABLE BED SIDE FD-210, FD-248, FD- 276 |
| 13 | Removing and S&F new top of table bed side made up of 18/19 mm thick pre- laminated MDF board of shade bavarian beech exterior grade of size 450x350mm. |
| 14 | Removing of old u/s sides of table bed side and S&F new sides of table bed side made out of 18/19mm thick MDF board of shade bavarian beech exterior grade of size 450x300mm |
| 15 | Removing of unserviceable ply wood back and S&F new back made out of6mm thick commercial plywood of table bed side of required size |
| 16 | Removing of unserviceable shelf/base of table bed side made out of 18/19mm MDF board exterior grade |
| 17 | French Polishing to table bed side |
| 18 | Replacement of following old broken unserviceable parts with new parts of TABLE CENTRE FD-29(M), FD-134(M), FD-152(M), FD-235,FD-274, FD-393 |
| 19 | Removing of old u/s existing top from table and S&F new top of size as per drg. Top shall be 18/19mmthick MDF board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood |
| 20 | Removing of old u/s leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item |
| 21 | Removing the existing u/s long railfrom table centre and S&F new long rail made out of Teak Wood duly finished & complete to match the original as shown on drg as directed by Engr-in-charge |
| 22 | Removing the existing u/s Short Rails from Table centre and S&F new short rails, made out of Teak Wood duly finished & complete to match the original as shown on drg as directed |
| 23 | Removing the existing u/s Stuffeners from Table centre and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on drg as directed by Engr-in-charge |
| 24 | French Polishing to Table Center |
| 25 | REPAIRS TO TABLE PEG FD-25(M),FD-236,FD-266,FD-277,FD-384 |
| 26 | Removing of oldu/s existing top from table and S&F new top of size as per drg. Top shall be 18/19 mm thick MDFboard exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood. |
| 27 | Removing of oldu/s leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item. |
| 28 | Removing the existing u/s long rails from table peg and S&F new long rails made out of Teak Wood duly finished & complete to match the original as shown on drg as directed by Engr-in-charge |
| 29 | Removing the existing u/s Short Rails from table peg and S&F new short rail made out of Teak Wood duly finished complete to match the original as shown on drg as directed by Engr-in-charge |
| 30 | Removing the existing u/s Stuffeners from Table peg and S&F new Stiffners made out of Teak Wood duly finished complete to match the original as shown on drg as directed by Engr-in-charge |
| 31 | French Polishing to Table peg |
| 32 | Replacement of following old broken unserviceable parts with new parts of TEAPOY WOODEN/FD FD-34(M), FD-232, FD-278,FD-382 |
| 33 | Removing of oldu/s existing top from table and S&F new top of size as per drg. Top shall be 18/19mmthick MDF board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood. |
| 34 | Removing of oldu/s leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item. |
| 35 | Removing the existing u/s long rail from Teapoy wooden and S&F new long rail made out of Teak Wood duly finished & complete to match the original as shown on drg as directed |
| 36 | Removing the existing u/s Short Rail from Teapoy wooden and S&F new short rail made out of Teak Wood duly finished complete to match the original as shown on drg as directed by the engineer in charge. |
| 37 | Removing the existing u/s Stuffeners from Teapoy wooden and S&F new Stuffeners made out of Teak Wood duly finished & complete to match the original as shown on drg & as directed |
| 38 | French polishing to Table peg |
| 39 | Replacement of following old broken unserviceable parts with new parts of TABLE DRESSING LADIES FD-32 (M), FD-251, FD-378 |
| 40 | Removing of old u/s mirror from table dressing ladies and S&F new mirror of size 1220 x 365 x 5 mm thick, duly fixed with frame as per drg. |
| 41 | Removing of old u/s plastic laminated sheet from the top of table and providing new plastic laminated sheet 1.00mm thick duly fixed with synthetic adhesive as per drg |
| 42 | Removing of old u/s glass shutters and aluminium channels and providing new sliding glass shutters duly fixed with new aluminium channels as per drg. |
| 43 | Removing of old u/s drawer with knobs and providing of new drawers of MDF board 18/19 mm thick for sides and 6 mm thick ply wood commercial ISI markedfor bottom including chromium plated knobs as per drg. |
| 44 | FrenchPolishing to Table Dressing Ladies |
| 45 | Replacement of following old broken unserviceable parts with new parts of TABLE 900X900X760MM FD-88(M), FD-94(M), FD-291,FD-352 |
| 46 | Removing of old u/s existing top from table and S&F new top of size as per drg. Top shall be 18/19mmthick MDF boardas approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 4mm teak wood. |
| 47 | Removing of old u/s leg and S&F new leg made out of Teak Wood as per drg duly finished and completed to match the existing surfaces of the item |
| 48 | Removing the existing u/s long rail/Short Railfrom Table 900X900X760mm and S&F new long rail made out of Teak Wood duly finished and completed to match the original as shown on drg as directed by Engr-in- charge. |
| 49 | Removing the existing u/s Stuffenersfrom Table 900X900X760mm and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on drg as directed by Engr-in- charge. |
| 50 | Frenchpolishing to Table 900X900X760mm |
| 51 | Supply and Fixing 15mm Dia PVC Bush on the legs of Table with 10mm long S/S Screw (various types and Drgs) small sizes |
| 52 | Supply and Fixing in repair 20mm Dia PVC Bush on the legs of Table with 15mm long S/S Screw (various types and Drgs) Large sizes |
| 53 | M&L Spray painting two coat of synthetic enamel Paint of silver metalic shade/colour (outer side) and OG/Smoke Gray colour paint (inner side) (as require & directed) on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes /bore holes etc with paste filler to under mentioned items complete all as specified & directed FD-67(M),FD-104(M),FD-114(M),FD-351, FD-389,FD-1031, FD-1033, FD/E6/MAP/18 & FD-67(M),FD-114(M), FD-115(M),FD-243, FD-350,FD-1032,FD-1034 |
| 54 | Almirah large steel with shelves and Almirah half hanging & half shelves(Complete internal and external surface) |
| 55 | Almirah steel Medium with shelves and Almirah steel small half hanging & half shelves(Complete internal and external surface) |
| 56 | M&L Spray painting two coat of synthetic enamel Paint of smoke grey colour on old painted surface with high class finish including necessary scrapping, denting and to smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/ bore holes etc with paste filler to under mentioned items complete all as specified and directed by Engr-in-charge. |
| 57 | Almirah large steel with shelves and Almirah half hanging & half shelves(Complete internal and external surface) FD-67(M),FD-104(M), FD-114(M),FD-351, FD-389, FD-1031,FD-1033, FD/E6/MAP/18 |
| 58 | Almirah steel Medium with shelves and Almirah steel small half hanging & half shelves (Complete internal and external surface) FD-67(M),FD-114(M),FD-115(M),FD-243, FD-350, FD-1032,FD-1034 |
| 59 | Book Shelf open small/Large steel/Book case steel/cabinet Map steel (Complete internal and external surface) FD-90(M),FD-1028, FD-397 |
| 60 | Table office officer steel (Complete internal and external surface)FD-84, FD-1002, FD-1003 |
| 61 | Table office Clerk Steel (Complete internal and external surface) FD-84,FD-1004 |
| 62 | Book case steel / cabinate filing (Complete internal and external surface).FD-1028 |
| 63 | Locker bed side steel (Complete internal and external surface).FD-127,FD-1029 |
| 64 | Table dining OR’s steel/Table 1520x860x760mm steel (Complete internal and external surface)FD-165(M),FD-90(M), FD-1010 |
| 65 | Table table 3x2 with & without drawers steel and Table 3\"x3\" steel (Complete internal and external surface) FD-142(M),FD-1009, FD-1014,FD1006,FD-1007, FD-1008 |
| 66 | Rack six tier Steel / four tier steel. FD-129(M),FD-1038 |
| 67 | Replacement of following old broken unserviceable parts with new parts ofAlmirah large Steel with Shelves/Almirah (L) Steel half hanging & half Shelves FD-67(M),FD-104(M), FD-114(M),FD-351, FD-389,FD-1031, FD-1033, FD/E6/MAP/18 |
| 68 | Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed |
| 69 | Removing of u/s lock and S&F New lock of 7lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed |
| 70 | Removing of u/s Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed |
| 71 | Removing of u/s & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed |
| 72 | Removing of u/s & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed |
| 73 | Removing of u/s & rusted shelves and S&F new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed |
| 74 | Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed |
| 75 | Removing existing u/s brass Bush Barrel and S&F new Brass Bush Barrel of suitable pattern to the locking system of Almirah steel of existing shape & size complete all as specified & directed |
| 76 | Removing existing u/s 3Way locking device and S&F new 3way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed |
| 77 | Replacement of following old broken unserviceable parts with new parts ofAlmirah Steel Medium/Small with shelves FD-67(M),FD-114(M),FD-115(M),FD-243, FD-350,FD-1032, FD-1034 |
| 78 | Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed |
| 79 | Removing of u/s lock and S&F New lock of 7lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed |
| 80 | Removing of u/s Broken handles and S&F new Chromium Plated handle of existing shape and size complete all as specified and directed |
| 81 | Removing of u/s & rusted legs and S&F new legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed |
| 82 | Removing of u/s & rusted shutters and S&F new shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed |
| 83 | Removing of u/s & rusted shelves and S&F new shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed |
| 84 | Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed |
| 85 | Removing existing u/s Bush Barrel and S&F new Brass Bush Barrel of suitable pattern to the locking system of Almirah steel of existing shape & size complete all as specified & directed |
| 86 | Removing existing u/s 3Way locking device and S&F new 3way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed |
| 87 | Welding of broken steel furniture FD-243,FD-1032,FD-1046,FD-1004,FD-1008,FD-1007, FD-562,FD-1014,FD-362,FD-1003,FD-75,FD-165(M), FD-75(M),FD-256 (Steel items of various drgs) |
| 88 | Gas Welding point (01 inch) on Broken part of steel furniture shall be carried out such as Almirah large steel with shelf/Wo shelf and Half hanging, Almirah med steel/small with shelf, Locker bed side steel, Table office clk steel, table 3\"x2\" steel w/d, Locker SKD 562 of chair CB steel with arms/ without Arms, chair verandah, table dining, table office, officer/clerk steel, chair easy steel, teapoy verandah & Steel items of various drgs etc. welding shall be done continuously type, including rubbing and finishing to smooth surface |
| 89 | Replacement of following old broken unserviceable parts with new parts ofply top charpoy GI FD-220 |
| 90 | Removing of old u/s plywood and S&F new 12mm thickness plywood top of size 1980x900 mm exterior grade BWR type (Nos of ply 7) ISI marked fixed with flat/dome head MS galvanished iron carriage bolts. The edge of plywood shall be smoothened alround & corner shall be rounded to a radious of 1cm iron carriage, 10Nos of round headed bolts with nut & washer of size 5x75mm after drilling the holes at equal distance on rails (03Nos on each long rail & 02Nos on each Short Rails) as per shown on drgall as directed by the Engr-in-Charge. |
| 91 | Removing of Old/u/s Long rails from charpoy GI Pipe and S&F of new long rail made out of GI Pipe 32mm nominal dia Med Grade duly threaded at both end upto 45mm & all as directed by the Engr-in-ChargeNote : U/S long rails be converted into 01 short rail & 1leg & measured in Sch No. 18(c) & 18(d) |
| 92 | Removing of Old/u/s Short rails from charpoy GI Pipe and fixing only Short rail retrieved and made out from schedule No 18(b) duly threaded at both end upto 45mm & all as directed by the Engr-in-ChargeNote: U/S Short rails be converted into 01leg and measured in Sch 18 (d) |
| 93 | Removing of Old/u/s Legs from charpoy GI Pipe and fixing only legs retrieved made out from old long rails/short rails, retrieved under item Sl No 18 (b) & 18 (c) here in before duly threaded at one end upto 45mm and all as directed by the Engr-in-Charge |
| 94 | Re-threading of existing loose long rails, short rails and legs of 32mm dia GI Pipe upto 45mm and assembling to make a charpoy frame complete as shown on drawing and as directed by Engr-in Charge.Note: Old existing loose long rails, short rails and legs shall be issued to the Contractor for re-threading and assembling it to make a charpoy frame |
| 95 | Removing ofOld/u/s broken existing elbow of charpoy GI pipe and S&F new elbow GI 3Way 32mm Med Grade ISI marked of existing shape and size complete all as specified & directed |
| 96 | Removing ofOld/u/s broken existing check nutof charpoy GI pipe and S&F new elbow check nut 32mm Med Grade ISI marked of existing shape and size complete all as specified & directed |
| 97 | Re-canning of chairs Varandah FD-19(M),FD-256,FD-259,FD-359 |
| 98 | Replacement of following old broken unserviceable parts with new parts of Chair CB Steel with Arms/Chair Steel tabular with Arms FD-75 (M) |
| 99 | Removing of old broken seat and S&F new seat of existing shape and size made from seasoned hardwood (Shisham) duly caned with 02mm semi/half round plastic cane of white colour as per Godrej pattern and frame of seat shall be finished/painted with black colour synthetic enamel paint complete all as specified & directed |
| 100 | Removing of old broken Back and S&F new Back of existing shape and size made from seasoned hardwood (Shisham) duly caned with 02mm semi/half round plastic cane of white colour as per Godrej pattern and frame of seat shall be finished/painted with black colour synthetic enamel paint complete all as specified & directed |
| 101 | Painting to steel frame chairs CB steel with one coat of olive green enamelled paints of approved brand. |
| 102 | Removing of old u/s Arms, supply & fixing new arms of existing shape and size made out of seasoned hard wood, Shisham duly painted with synthetic enamel black paint and shall be fixed with steel screws complete all as specified & directed |
| 103 | M&L for provide 25x5mm flat iron support 50mm long 4Nos each chair under bottom of seat welded with frame complete all as specified and directed |
| 104 | Varios Drgs of steel tables (Large & small in Size)Supply and Fixing 15/20/25mm Dia PVC/Rubber Bush on the legs of Table (various types and drgs) small & large sizes |
| 105 | Supply and Fixing 15/20/25mm suqare PVC/Rubber Bush on the legs of Table (various types and drgs) small & Large sizes |
| 106 | Replacement of following old broken unserviceable parts with new parts of CHAIR DINING FD-16(M),FD-203, FD-228,FD-279 |
| 107 | Removing of old u/s front leg and S&F new front legmade out ofteak wood of existing shape & size complete to match the original as shown on Drg as directed |
| 108 | Removing of old u/s rear leg and S&F new rear legmade out ofteak wood of existing shape & size complete to match the original as shown on Drg as directed |
| 109 | Removing of old u/s front/back rails and S&F new front/back rails (including holes for canning)made out of teak wood of existing shape & size complete to match the original as shown on Drg as directed |
| 110 | Removing of old u/s side rails and S&F new side rails (including holes for canning) made out ofteak wood all of existing shape & size complete to match the original as shown on drg |
| 111 | Tightening of Chair dining complete, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge |
| 112 | Removing of old U/s stiffeners and S&F new stiffenersmade out ofteak wood of existing shape & size complete to match the original as shown on Drg as directed |
| 113 | M&L French Polishing to chairs with high class finish including preparation of surfaces by proper sand papering complete all as specified and as shown on drawing. |
| 114 | RE-CANNING OF VARIOUS TYPES OF FURNITURE FD-16(M),FD-203,FD-228,FD-279, FD-17(M), FD-201, FD-229,DB-4174, FD-20(M),FD-202,FD-250,FD-280, FD15(M),FD-27(M), FD-212,FD-244,FD-385,FD-252& various items of Canned furniture |
| 115 | M&L for removing of old/broken/ unservisable plastic cane & re-canning of chair dinnig, chair CB without arms/chair writing,chairs CB with arms,chairs writing, chair CB office, chair easy FD/NF, chair, stool dressing CB, Couch set & bin solied linen with 2 to 2.5mm semi round cane plastic of white colour and border with 3 to 4mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godraj pattern. Cane should be in White colour (Non recycled) & make as approved |
| 116 | Repairs to Computer table FD/E6/MAP/03 /TP |
| 117 | Removing of u/s top and S&F new top of prelaminated MDF board exterior grade 18mm thick Grade-I, Type-II exterior grade of appproved make (Covered with 4mm thick teek wood/PVC beading duly polished) of existing shape & size complete to match the original as shown on drg as directed |
| 118 | Removing of u/s side and S & F new side of prelaminated MDF board exterior grade 18 mm thick grade-I, type-II, exterior grade of approved make of existing shape & size complete to match the original as shown on drg as directed |
| 119 | Removing of Broken/u/s keyboard and S&F new keyboard of prelaminated MDF board exterior grade with sliding arrangement /telescopic rails both sides of key board of existing shape & size complete to match the original as shown on drg as directed |
| 120 | Removing of u/s drawer & S&F new drawer with sliding arrangement/ telescopic rails both sides of drawer including of 4 leaver lock as per Godrej pattern of existing shape & size complete to match the original as shown on drg as directed |
| 121 | Removing of u/s base/bottom cabinet and S&F of new bottom cabinet of 18mm thick pre- laminated MDF board exterior grad 18mm thick grade-I, type-I of existing shape & size complete to match the original as shown on drg as directed |
| 122 | M&L for polishing with French polish to under mentioned item of furniture articles (of messes, Units, IB etc) with high class finish after rubbing old polish. The surfaces shall be rubbed down to smoothness with sand paper, the porous in wood shall be filled with filler solution as directed |
| 123 | Bed ply wood top/Bed Hard Wooden/Bed Newar, Double Bed Trade Pattern FD-213,FD-214, FD-245, FD-1121, FD-247,FD-1102, FD-1120,FD-246,TP |
| 124 | Chair writing/CBA/CB office/CBB/dining/Chair easy FD/NF/Chair wooden bottom (BKB)/BKA/Chair CBA with hand rest, Chair Dining Long Back (TP), Chair Easy(TP), Chair Wiriting Wooden (TP) etc. FD-16(M), FD-17(M), FD-20(M), FD-56(M), FD-148,FD-149, FD-201,FD-202, FD-203, FD-225, FD-228,FD-229, FD-250,FD-279, FD-280,FD-285, DB-4174,TP & Long Back Dining Chairs |
| 125 | Table writing Med/Table writing FD/Table office clerk wooden/Table office officer wooden/Table 900x900x760mm /Table 3’x2’ with or without drawer/Table writing cadets/Table Examination/Table one piece/Table two pieces for all purposes/ Table dining 6 Pers FD-30(M),FD-41(M), FD-42(M), FD-55(M), FD-88(M),FD-94(M), FD-223,FD-224,FD-239, FD-352, FD-269, FD-273,FD-376,FD-283, FD-284,FD-291 & all types of Large Tables of Trade Pattern |
| 126 | Table peg/Table centre/teapoy FD wooden/Table bed side FD withand without drawer FD-25(M),FD-29(M), FD-34(M),FD-134(M),FD-152(M), FD-210, FD-232,FD-235, FD-236,FD-248, FD-266,FD-274,FD- 276,FD-277, FD-278,FD-382, FD-384,FD-393& all types of small Tables of Trade Pattern |
| 127 | Table dressing Gents with mirror/Table dressing ladies with mirror FD-31(M),FD-32(M), FD-230,FD-251, FD-378,FD-379,TP & various dessingtable/chests |
| 128 | Sofa set 4 seated/5 seated cushened FD-154,FD-272, FD-281,FD-373,FD/MAP-II/02,TP |
| 129 | Replacement of following old broken unserviceable parts with new parts ofBED PLY TOP FD-213,FD-214, FD-245, FD-246,FD-247 |
| 130 | Removing of old u/s hard board and S&F new hard board made out of teak wood frame of size 900x600mm including leg and 4mm thick both side teak face ply ISI marked for both sides & complete teak wood beading shall be provided all over complete all as directed |
| 131 | Removing of old u/s foot board and S/F new foot board made out of teak wood frame of size 900x450mm including 4mm thick both side teak face ply ISI marked and complete 04mm thick teak wood beading shall be provided all over complete all as directed |
| 132 | Removing of old broken long rails and S&F new long rails of shisham wood of size 1800x90x35mm long as per drg duly finished and complete all as directed. |
| 133 | Removing of old U/S worn out ply wood top and S&F new ply wood top of size 1800x900mm of 12mm thick commercial BWR/ISI mark complete as approved by GE & rest all as per drg. |
| 134 | Removing of old broken short rail/center stuffiner and S&F new short rails/center stuffiner of shisham wood of size 900x90x35mm long as per drg duly finished and complete all as directed |
| 135 | Frenchpolishing to Bed with plywood Top/Bed Newar |
