|
| 1 | Taking down old rolling shutter and refixing the rolling shutter on same position , incl having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 nos of ball bearing and MS handles including all necessary greasing & easing, replacement of unserviceable parts incl one coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.NOTE :- Parts replaced shall be measured and paid seperately |
| 2 | (a) Supply only MS steel sheet 1.0mm thick |
| 3 | (b) Supply only spring suitable for rolling shutter |
| 4 | (c) Supply only MS safety lever locks with 4 levers for rolling shutter |
| 5 | (d) Supply only ball bearing for rolling shutter |
| 6 | (e) Supply only MS handles 150mm in size for rolling shutter |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 8 | Material and labour for Framed work as in doors or gates of angle, channel or other section (i.e flat/tubular) with gusset plates, rails, braces of Fe-410-W (Gde-E-250) quality-B, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges/holdfast or steel hanging door fittings in plain cement concrete (1:2:4), type B-1(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 9 | Supply and fix for 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as per required at site complete all as specified and as directed. |
| 10 | Supply and fix for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290,Gde-E-165 etc complete all as specified and as directed. |
| 11 | Taking down steel / iron gates area not exc 10 Sqm each including hold fastsandre-fixing the gates in the same opening including shifting and fixing of existing holdfast inplain cement concrete (1:2:4), type B-1 after raising the gate level including greasing, painting and other necessary minor repairs complete all as specified and as directed. |
| 12 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, PVC panelling etc) or insulation boards /slabs/blankets any thickness, including cover fillets complete all as specified and as directed. |
| 13 | Material and labour solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as as per direction of Engineer-in-Charge. |
| 14 | Supply and fix in repairs dypsum reinforced boards 600x600x8-10mm thick for ceiling hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white.The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres.Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level adjusters and screws etc,The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall.Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently.600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee.Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instructions and finishing the surface by applying two coats ofplastic emulsion paint incl taking down complete all as specified and as directed. |
| 15 | Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 16 | Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 17 | Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed. |
| 18 | Taking down shutter of any description but exceeding 2 Sqm each complete all as specified and as directed. |
| 19 | Supply and fix 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed. |
| 20 | Supply and fix for 35mm thick 2nd class hard wood factory made plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces.The size of rail and style as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed. |
| 21 | Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed. |
| 22 | Supply and fix for 30mm thick 2nd class HW glazed andskelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed. |
| 23 | Supply and fix factory made solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed. |
| 24 | Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock25mmthick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. |
| 25 | Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter framesize 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed. |
| 26 | Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as specified and as directed. |
| 27 | Supply and fixing in repair powder coated aluminium door made out of hollow extruded aluminium section as mentioned below. Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydrolic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly paneled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete all as specified and as directed. Chowkhat Frame : 101.60x44.45x1.55 mmShutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mmShutter top and bottom rail : 110x44.45x1.54 mm |
| 28 | Supply and fix powder coated aluminuiim partitions wall including anchorage rod, aluminium cleats, drilling, punching, plastering, and making good to the existing surfaces and comprising of following specification as directed :- (a) aluminium section of size 49.91x44.45x2.00 mm thick(b) 5 mm thick tinted glass with aluminium galzing clips and rubber beads, area not exceedings 1.5 sqm (c) 12 mm thick both side prelaminated particle baord fixed with aluminium clips and rubber beads complete all as specified and directed |
| 29 | Supply and fix butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and as directed. |
| 30 | Supply and fix aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed. |
| 31 | Supply and fix aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed. |
| 32 | Supply and fix 140mm size floor door stopper of aluminium alloy body and tongue, iondised, with hard drawn steel spring, fixed in floor for aluminium/wooden door, complete all as specified and as directed. |
| 33 | Supply and fix in repair aluminium (Die cast) door closure hydrauically regulated, designation, No-2, universal type suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60Kg and fixed, complete all as dpecified and as directed. |
| 34 | Supply and fix in repair 180mm size powder coated (any tint) aluminium \"American Handle\" fixed to aluminium door with suitable screws, complete all as specified and as directed. |
| 35 | Supply and fix in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 36 | Supply and fix in repair brass mortice lock vertical type 100mm size, 4 lever fixed in aluminium shutter, complete all as specified and as directed. |
| 37 | Supply and fix aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed. |
| 38 | Supply and fix Extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed. |
| 39 | Supply and fix in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 40 | Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightning with new screws of by aluminium angle, cleat and other connected work complete all as specified and as directed. |
| 41 | Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 42 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 43 | Supply and fix in repair plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed. |
| 44 | Material and labour for preparationof new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed. |
| 45 | Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 46 | Supply and fix in repair PLEATED pleased Zebra/roller blinds made of polyester fabric with alumnium coating at its back. Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colours. Cord lock and pulleys made of brass, design and type as approved by GE complete all as specified and as directed. |
| 47 | Supply and fix in repair harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 48 | Material and labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nailse around the partical board etc complete all as specified and as directed. |
| 49 | Supply and fix wardrobe push magmet drawrer to fix with wooden/kitchen cabinet or any other requirement as per sitecomplete all as specified and as directed. |
| 50 | Supply and fix 150mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 51 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed. |
| 52 | Material and labour Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specified and as directed. |
| 53 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing fair and even without using extra cement and similar like etc complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely |
| 54 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 finishing even and smooth without using extra cement and similar like etc complete all as specified and as directed. |
| 55 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely |
| 56 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. |
| 57 | Supply only liquid water proofing compound complete etc all as specified and as directed. |
| 58 | Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint oaver a coat of primer at any height including necessary scaffolding ladder etc complete all as specified and as directed. |
| 59 | Material and labour for preparing new plastered surface of walls and applying two coat of oil bond acrylicdistemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specified and as directed. |
| 60 | Material and labour for Rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia,fins,parapet etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement/lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed. |
| 61 | Material and labour for preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia,fins,parapet etc and applying three coats of white wash complete all as specified and as directed. |
| 62 | Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound acrylic distemper upto height 10 mtr etc complete all as specified and as directed. |
| 63 | Material and labourfor two coats of synthetic enamal paint of approverd tint on steelsurfacesincluding prepration of old surface of any description, over 10cm in width or girth complete all as specified and as directed. |
| 64 | Material and labour for vitrified tiles double charge 8-10mm thick (square/rectangular) polished area of each tile exc 0.36 and n exc 0.72 sqm over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 65 | Description all as per Ser item No 64 above but in skirting and dado or verticle surface laid over and incl 10mm thick rendering in CM 1:4 with chemical (RAUF) and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed. |
| 66 | Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 67 | Description all as per Ser item No 67 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed. |
| 68 | Material and labour for glazed coloured ceramic tiles External/Internal in vertical surface 300mmx450mmx 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed. |
| 69 | Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 70 | Material and labour for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 71 | Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and as directed. |
| 72 | Material and labour for Granite slab 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 73 | Supply and fix for 37mm thick WPC (Wood plastic composite) Shutter and fixed to frame as per site requirement complete all as specified and as directed. |
