|
| 1 | Cleaning of blockage of WCs, bathrooms, gully traps, floor traps etc blocked sewage line upto first manholes including cleaning / washing the area and refixing the grating of trap etc as a daily basis as and when received the complain from users complete all as specified and as directed. |
| 2 | Cleaning of blocked sewage line of 100/150 mm bore pipe by using bamboo sticks or MS rods and revolving with rope inside the sewer line between two manholes and cleaning the sewer lines with fresh water incl taking out sludge complete all as specified and as directed. |
| 3 | All as per item No. 2 above but 200 mm bore pipe |
| 4 | Material and labour for taking out sludge including effluent from septic tank/manhole/digestion chamber/ soakage well, mechanically or mannually and disposed off the sludge to a distance exc 1.50 Km but n.exc 5.00 Km, burried the waste/sludge into pitsincluding sprinkling of blEACHing powder over the waste/sludge complete all as directed and specified. |
| 5 | Clearing thegrease trap including inspection chamber and getting out sludge by mechnical equipement or manualand other acCUBIC METREulated materials complete and including refilling the waterand disposal ofsludge to distance exc 1.50 Km but n.exc 5.00 Km complete all as specified and as directed.Note: - (a) Emergency complaints should be rectify within 24 hours as directed by Engr-in-Charge. (b) Volume of sludge after drained out shall only be measured. |
| 6 | Excavation in trenches n.exc. 1.50 m deep and n.exc. 1.50 m wide in soft / loose soil for drain pipes, manholes etc complete all as specified and as directed. |
| 7 | Returning, filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm thick in layers etc all as completed and as directed. |
| 8 | Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. |
| 9 | Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and as directed. |
| 10 | Material and labourfor PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl forming cradles etc of the pipes after they are laid and tested for 150 mm boreRCC pipe etc complete all as specified and as directed. |
| 11 | All as per item No. 10 above but 200 mm bore pipe |
| 12 | Material and labourfor reinforced cement concrete pipes class NP - 2, laid in trenches & jointed complete with collars, bore of pipe 150 mm including demolition and breaking up old drain pipe set in cement mortar of same diameter etc complete all as specified and as directed. |
| 13 | All as per item No. 12 above but 200 mm bore of pipe |
| 14 | Material and labourCement Concrete (1:3:6) type C2 (40mm graded) in foundation filling and mass concreting complete all as specified and as directed. |
| 15 | Material and labourfor brick work with sub class \"B\"bricks straight or curved on plan exc 6m meanradius built in CM 1:6 including demolition of old brick work/stone boulder masonry built in cement mortar in any position etc complete all as specified and as directed. |
| 16 | Material and labourfor rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface finished even &smooth with using extra cement complete all as specified and as directed. |
| 17 | Material and labourfor PCC 1:2:4 type B-1 (20 mm graded stone aggregate in coping, benching etc slightly rounded or chamfered complete all as specified and as directed. |
| 18 | Material and labourfor pre cast cement concrete cover slabs of PCC 1:2:4 Type B-1 set & jointed in CM 1:6 (Reinforcement shall be measured & paid separately) including demolition of reinforced cement concrete manhole/drain cover slab etc complete all as specified and as directed. |
| 19 | Material and labourfor mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 20 | Supply and fixing 110 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition and breaking up old pipes etc complete all as specified and as directed. |
| 21 | Supply and fixing 110 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including demolition and breaking up old pipes etc complete all as specified. |
| 22 | Supply and fixing PVC (SWR) bends any radius, 110 mm bore, complete all as specified and as directed. |
| 23 | Supply and fixing Tee suitable for 110 mm bore PVC (SWR) pipe complete all as specified. |
| 24 | Supply and fixing PVC (SWR) vent cowl,110 mm bore complete all as specified anddirected. |
| 25 | Supply and fixing in repair 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal all as directed. |
| 26 | Supply and fixing 75 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition and breaking up old pipes etc complete all as specified. |
| 27 | Supply and fixing 75 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including demolition and breaking up old pipes etc complete all as specified. |
| 28 | Supply and fixing of PVC (SWR) bends any radius of 75 mm bore pipes complete all as specified. |
| 29 | Material and labourPVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement including all necessary concrete work and connecting jobs for making good the area complete all as specified. |
| 30 | Supply and fixing 40 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kgf/Sq cm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 31 | Supply and fixing of stainless steel grating,100 mm dia, with waste hole, of PTMT (minimum weight 40 gms), fixed in repairs, all as specified and directed. |
| 32 | Material and labour for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of EACH tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises etc complete all as specified and directed. |
| 33 | Material and labour for glazed ceramic coloured tiles of approved quality ISI marked (450 X 350X7 mm / 450 x 300 x 7 mm / 350 x 250 x 7 mmthick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises etc complete all as specified and directed. |
| 34 | Supply and fixing in repairs vitreous China wash down water closet pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour), closed pattern with flat bottom, and cover and mild steel chromiuum plated or cluminised hinging device also making good to floor. |
| 35 | Supply and fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. |
| 36 | Supply and fixing in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make. |
| 37 | Supply and fixing in repairs of vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and directed. |
| 38 | Supply and fixing in repairPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 39 | Supply and fixing in repairs vitreous china urinals, flat back, bowl type of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed. |
| 40 | Removal of plants/trees/Shrubs from roof tops/sides, external walls of BLDG, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall /slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVc pipe joints which were damaged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging up to a maximum height of 15.00 m from the ground level complete all as specified and as directed.(a) For roof area of the building upto 200.00 Sqm |
| 41 | Allas per item No 40 above but for roof area of the building exceeding 200 Sqm and not exceeding 500.00 Sqm |
