|
| 1 | Dismantling floor, hearth or wall tiling including cementmortar beddingremoving serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished,area of each tilesnot exc 0.36 sqmin floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished,area of each tilesnot exc 0.36 sqmin walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed by Engineer-in-Charge. |
| 4 | S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15 mm thick screed bed in cement mortar (1:6)complete all as specifed and as directed by Engineer-in-Charge. |
| 5 | S&F glazed ceramic (coloured) tiles (300mmx 450mmx7 mm) in vertical surfaces such as skirting dados and risers of steps etc set and jointed in neat cement slurry and pointed in white or coloured cement. Including cutting the tiles to the required size wherever required including motering the corners etc over & including 10 mm thick backing coat of cement plaster in CM (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 6 | Dismantling stone slabs and tiles of any description or thickness in kitchen platform and similar work laid, bedded and pointed in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including15mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of slab complete all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge. |
| 9 | M&L for Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations |
| 10 | S&F in repairs vitreous china water closet \"Orissa\" pattern of size 580mm X 440mm, white with integral foot rest(excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed by Engineer-in-Charge. |
| 11 | S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging deviceVitreous china premium/ 1st qualitywash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified (excludingflushing cistern ) etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&Fin repair Two piece EWC 680x360x765mm white,with seat cover and twin flushing cistern complete all as specified and directed by Engineer-in-Charge by Engg-in-charge as per CERA CAT NO-S1021103 S TRAP 230mm,CAT NO S1060101,CAT NO B1510124 Carina Seat Cover,CAT NO B1810101 Twin Flush Fittings all as specified |
| 13 | S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and as directed by Engineer-in-Charge. |
| 14 | S&F in repairs Low / high level flushing cistern 10 ltr capacity, PVC valveless, syphonic action incl waste pipe, pair of CI brackets and all accessories complete all as specified and as directed by Engineer-in-Charge. |
| 15 | S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittingswith long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed by Engineer-in-Charge. |
| 16 | S&F in repairs unplasticised PVC pipes 50mm boreof pressure rating 10 Kg/cm2 fixed complete to walls, ceiling or laid in floors etc all as specified andas directed by Engineer-in-Charge. |
| 17 | S&F in repairs brass chromium plated shower rose with or without swivel joints 75mm size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge. |
| 18 | S&F in repairs brass chromium plated Over head shower rose 120 mm dia with 3 flow with swivel joint, including shower arm,fixing to steel pipe or union including taking down old shower rose complete all as specified and as directed by Engineer-in-Charge by Engg-in-charge.CERA CAT NO.Cera shower rose F7020305AB Shower arm F7040104. |
| 19 | S&F in repairs Bib taps, fancy type, chromium platedwith crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S&F in repairs 2-way Bib cock with single handle Quarter turn and wall flange, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and as directed by Engineer-in-Charge.CERA CAT NO-F1023163 |
| 21 | S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 22 | S&F in repairs Pillar cock with aerator handle Quarter turn, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and as directed by Engineer-in-Charge.CERA CAT NO-F1016101 |
| 23 | S&F in repairs Stop valves, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F in repairs Angle cock, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F in repair PVC connections, 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F in repairs hand shower (Health Faucet), chromium plated with 8mm dia, 1.00m long flexible tube with wall hook all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F in repairs hand shower (Health Faucet)ABS body with wall hook and 1mtr chrome plated PVC hose pipe all as specified and as directed by Engineer-in-Charge.CERA CAT NO-F8030103 |
| 28 | S&F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type. Make -Jaqur,Prayag polymers Pvt Ltd or equivalent. |
| 29 | S&F in repairs Stainless steel soap dish,white size 160x160x90 mm as approved fixed with brass screws or embedded in wall.CERA CAT NO-F5003106 |
| 30 | Cutting chases, pinning in.in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 31 | Taking up or down steel tubing and connections, 15 mm bore including cleaning for re-fixing or removal to store |
| 32 | S&F for Tubes, ‘medium grade’ galvanised, 15mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etccompleteall as specified and as directed by Engineer-in-Charge. |
| 33 | Supplying and laying of CPVC pipes SDR 11 16 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying and conceiling it in floors/walls complete all as specified. |
| 34 | Taking up or down steel tubing and connections, 20 mm bore including cleaning for refixing or removal to store |
| 35 | S&F for Tubes, ‘medium grade’ galvanised, 20mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etccompleteall as specified and as directed by Engineer-in-Charge. |
| 36 | Supplying and laying of CPVC pipes SDR 11 20 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying and conceiling it in floors/walls complete all as specified. |
| 37 | Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends and fittings etc |
| 38 | S&F75mm bore PVC (SWR)pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings and jointed with solution claw Module Hybrid Sealent etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etccomplete all as specifed and directed by Engineer-in-Charge. |
| 39 | S&F110mm bore PVC (SWR)pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings and jointed with solution claw Module Hybrid Sealent etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etccomplete all as specifed and directed by Engineer-in-Charge. |
| 40 | S&F 75mm bore PVC (SWR) bends any radius dimnishing pieces or tapers withaccess doors and jointed with solution claw Module Hybrid Sealent etc, complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F 110mm bore PVC (SWR) bends any radius dimnishing pieces or tapers withaccess doors and jointed with solution claw Module Hybrid Sealent etc, complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F 75mm bore PVC (SWR) branch piece, single (single Y ) equal or unequalwithaccess doors and jointed with solution claw Module Hybrid Sealent etc, complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S&F 110mm bore PVC (SWR) branch piece, single (single Y ) equal or unequalwith access doors and jointed with solution claw Module Hybrid Sealentetc, complete all as specified and as directed by Engineer-in-Charge. |
| 44 | S&F 75mm borePVC (SWR) branch piece,double (double Y) equal or unequal withaccess doors and jointed with solution claw Module Hybrid Sealent etc, complete all as specified and as directed by Engineer-in-Charge. |
| 45 | S&F 110mm borePVC (SWR) branch piece,double (double Y) equal or unequal withaccess doors and jointed with solution claw Module Hybrid Sealent etc, complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,for 75/100mm dia pipe including bolts and nuts and securing ends of stays to wall or roof |
| 47 | S&F in repairs 500 ltrs Rotational mould polyethylene waterstorage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F in repairs 1000 ltrs Rotational mould polyethylene waterstorage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in repairs2000 ltrs Rotational moulded polyethylene waterstorage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-Icomplete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F in repairs 300 ltrs Rotational mould polyethylene waterstorage Loft tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and directed by Engineer-in-Charge. |
| 51 | S/F in repair Ball valveof size 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixedcomplete all as specified and directed by Engineer-in-Charge. |
| 52 | All as per item No-51 here-in-beforebut of size 25 mm dia. |
| 53 | Demolition of concrete in sunken floor incl removal of filling etc complete incl removal of demolished material to a distance as specified. |
| 54 | M & L for Water proffing treatment to shunken slab /floors/walls its and shall be carried out as specified below and as directed by Engineer-in-Charge.(a) Clean the sunken partion of Toilet/baths/WC/Kitchen throughly to remove the laitance, dirt etc(b) Form angle fillet of size 40 mm X 40 Mm along the junction of wall abd floor using polymer modified mortar(Dr fixit Pidicrete URP or Eqvt)(c ) Sanitary pipe entering through walls and floor shall be sealed with Dr fixit bath seal tape/Dr Fixid epoxy bonding agent and gaps to be grouted with non shrink cementious grout Dr fixit bath seal grout or eqvt. Nahani traps etc to be fitted securely and gaps around it to be grounted in the manner.(d) Apply Acrylic cementitious two component waterproof coatingExtend the coating up to 150 mm above the FFL another cementitious water proof coating Dr fixit Pidifin 2 K or eqvt with minimum elongation of 50%.Provide and lay 45GSM glass fibre mesh over the angle fillet when the first coat in still wet.Allow the coating to cure for 6 to 8 hrs.after completion of first coat,take up second coat application in direct perpendicular to the first.vertical application coating should be applied upto a height of 6-7 feet over the shower splash zone to ensure complete waterproofing.(e) After 2 to 3 days sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC liquid laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall, then filled up the sunken portion with lean concrete 1:5:10 type E2.(f) After completing plumbing wk in the toilet ,WC,,bath, Kitchen floor tiling wk (floor and dao) can be carried out using suitable tile adhesive and ready to make tile grouts of approved makes such as Dr Fixit, Fosroc,Sika etcNote : All the material involved in sunken treatment are included in above quoted rate. |
| 55 | Making hole and fixing the metallic packer for injecting hydrophobic PU foam and Sealer as per manufacturer’s instruction. (Avg. 1 metallic packer per sq meter.)Note: The Treatment should be carried out through Authorised applicator only |
| 56 | M&L CORESEAL 357A/ CORESEAL 357 CAT for carrying out non destructive waterproofing treatment of some portion slab, by using construction chemical methods such as, 1)HYDROPHOBIC PU GROUTINGIncl, cleaning of surface with wire brush detecting the sources of leakages. NOTE: The Treatment should be carried out through Authorised applicator only |
| 57 | M&L for second course injection of CORESEAL 135A/ CORESEAL 135B Make : Build core chemicals or equivalentNOTE: The Treatment should be carried out through Authorised applicator only |
| 58 | Tiles Joint regrouting and Chemical CleaningCarefully washing the existing tile with heavy duty tile cleaner preferably of M/s. Bal Endura, M/s. Pidilite or equivalent Cleaning again with fresh jet water, Scratching the joints and filling the same with epoxy tile grout of M/s. Bal Endura, M/s. Pidilite or equivalent white/matching colour with Curing, clearing and handing over all complete as directed by Engineer in charge, and as per the Sampling done at ground level. NOTE: The Treatment should be carried out through Authorised applicator only |
| 59 | Vitreous China Urinal, bowl type (back or corner wall type),With flat back size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipecomplete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. |
| 60 | Cleaning and removing allscale and dirt, etc, from RCC/PVC tanks and from mouths of circulating pipes, etc. Note:-(i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work.(ii)Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing.The process of claning for the following capacity of water tank:- Cleaning of RCC water tank capacity above 250 but n exc 500 litres. |
| 61 | Cleaning of RCC/PVC water tank capacity above 500 but n exc 1000 litres. |
| 62 | Cleaning of RCC/PVC water tank capacity above 1000 but n exc 2000 litres. |
| 63 | Cleaning of RCC/PVC water tank capacity above 2000 but n exc 5000 litres. |
| 64 | Cleaning of RCC/PVC water tank capacity above 5000 but n exc 10000 litres. |
| 65 | M & L For cleaning/opening of choke up of drain pipe(SWR line) of bathroom and W/C upto first manhole with the help of pump machine where required including mechanical tools like drain auger and chemical drain cleaners,as well as natural solutions like baking soda and bleaching powder or manual cleaning.Note:- Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. |
| 66 | S&F Ball valves of size 40mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm complete as specified and directed by Engineer-in-Charge |
| 67 | S&F Waste pipe of 32/40mm for wash basin,Kitchen sink and urinals with minimum length of 90cm all as specified and as directed by Engineer-in-Charge. |
| 68 | S&F Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms of size 32mm for wash basin,Kitchen sink and urinals with all fitings required for fitmentment all as specified and as directed by Engineer-in-Charge. |
