|
| 1 | Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion and making good disturbed groundfor posts embedded in natural groundincludingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 2 | Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion and making good disturbed groundfor posts embedded in concrete, brick work, masonry etc. includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 3 | Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in hard / dense soil complete all as specified and directed. |
| 4 | S&F Rolled mild steel,structural steel work asin Joist, channel, angle or tee sections, fixed independently , without connection plate etc cut to ordinary length within 20mm of the lengthconforming to Fe 410-W (Gde E-250 quality-B) complete all as specified and as directed |
| 5 | S & F Mild steel TMT bars 10 mm dia over, cut to length, bent to shape required including cranckingbending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9 mm dia securing with clipscomplete all as specifed and directed. |
| 6 | All as per item No 05 above, but 6 mm to 8 mm dia complete all as spd and directed. |
| 7 | M&L Providingprecast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate)as in fencing post and similar work complete all as specified and directed. |
| 8 | M&L PCC (1:4:8)type D2 (using 40mm aggregate stone aggregate)as in foundatons, filling and mass concrete complete all as specified and as directed. |
| 9 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 10 | S&F MS Framed work such as gates,grills, gratings,hook and Pintle higes for large steel gates ,railing etc including round headed screws or welding seams including bending or turning up mitred angles etc as required etc, with ends of bars shouldered and/or riveted, or forged into spiles; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; gates, railings,rollers etc and similar work conforming to Fe 290,Gde-E165 and complete all as specifed and directed |
| 11 | S&F 1.00 mm thick mild steel, plain,black sheet in wall cladding, steel gates and similar work cut size, holes punched, including round headed screws or welding seams including bending or turning up mitred angles etc complete all as specified and directed. |
| 12 | S&F Decorative Knobs for fixing of gates any size, etc complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L Welding in repairs not exceeding 2.5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L Welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed by Engineer-in-Charge.Note: (1) Works shall be carried out in multi storey Building upto 2nd floor. |
| 15 | M&L Preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paintover a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 16 | Dismantling of fencing wire mesh of any typeincludingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 17 | Supply only mild steel galvanised chain link fencing of any size or type complete all as specified and as directed |
| 18 | Fixing for chain link fencing including line wires, any mesh, size, rails, straining bolts, etc. including provision of binding wire. (Chain link fencing and line wire shall be paid at supplied only rate) complete all as specifed and directed. |
| 19 | S&F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm long but not exceeding10 cm long, 5 to 10 mm dia of neck complete as specified and directed. |
| 20 | S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed. (each line wire to be measured) |
| 21 | Demolition of brickwork or stone/boulder masonry / Block masonry, built in cement mortar including facing, dressed stone work and precast concrete all quoins, arches, pillars, copingetc but excluding ashlars articlesincludingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 22 | M&L Walling of squared rubble masonry regular coursed, Secunderabadand Bangalore type, well bonded, bedded and solidly hearted, built in CM (1:6)complete all as specified and as directed |
| 23 | All as per item No 22 above, but except stones complete all as specified and directed.Note: Serviceable stones obtained vide item No.21 shall be reused after removing mortar and cleaning with water complete all as specifed and directed. |
| 24 | M&L Brick work with fly ashbricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed. |
| 25 | Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 26 | Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided including roof padding concrete and includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 27 | M & L Precast cement concrete block masonry with solid blocks exceeding 10cm in width by using solid blocks of PCC (1:3:6) type C1 (using 20 mm graded stone aggregate)and set in CM (1:6) complete all as specified and and directed. |
| 28 | M & L Providing, PCC (1:2:4) type B1 ( using 20mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating,including necessary form work complete all as specified and as directed. |
| 29 | Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including rackingout joints, hacking for key, scrubbing down with water etc and includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 30 | M&L Rendering 15 mm thick in CM (1:6) on brick work or concrete surfacesand finished even and smooth without using extra cement complete all as specified and as directed. |
| 31 | M&L Rendering 10mm thickCM (1:6) on brick work or concrete surfacesand finished even and smooth without using extra cement complete all as specified and as directed. |
| 32 | M&L Rendering 15 mm thick in CM (1:4) on brick work or concrete surfacesand finished even and smooth without using extra cement complete all as specified and as directed. |
| 33 | M&L Raised pointing of random or polygonal rubble uncoursed or brought upto coursesin CM (1:4)complete all as specified and as directed |
| 34 | M&L 25 mm thick (measured solid),louvers and jallies of size 60 x 60 or 60 x 90 cm with using precast cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate)including all mouldings set in CM (1:4) andcomplete all as specified and as directed. |
| 35 | M&L Providing PCC (1:2:4)type B-1(using 20mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and as directed. |
| 36 | M&L Extra for forming fair finished drain or channel 25 centimetre inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stop ends etc. complete all as specified and as directed |
| 37 | M&L Preparation ofnew plastered wall surfaces and applying three coats of white wash to match with the existing surface complete all as specified and as directed. |
| 38 | S&F in repairs 2mm thick plain colour PVC sheet fixed in MS angle frame work or laid on to Mild Steel door and gate with coach screw including all assessaries complete all as specified and as directed by Engineer-in-Charge. |
| 39 | M&L 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed. |
| 40 | M&L 60 mm thickness, Machine pressed precast concrete interlocking paver blocks,M-35 grade with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006complete all as specified and as directed. |
| 41 | M&L 80 mm thickness, Machine pressed precast concrete interlocking paver blocks,M-40 grade with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006complete all as specified and as directed. |
| 42 | M&L Sand/ grit filling or cushioning below interlocking tiles including spreading and levellingcomplete all as specified and as directed. |
| 43 | M&L Designer rubber moulded chequerred cement concrete tilesof size 300 x 300 x 22mm or 250 x 250 x 22mm thickwith mixture of greyand white cemetn in equal porportions with pigments and set and pointed in neat cement slurryas in floors overand including 15 mm thick screedbed or bedding layier in CM (1:6)etc complete all as specified and as directed. |
| 44 | M&L Providing pre castmachine pressed cement concrete (1:2:4) type B-0 (using 12.50 mm graded stone aggregate)as in kerbs stones and fixingall as per manufacturer instructions etc complete all as specified and as directed. Note:size shallbe decided and directed by GE |
