|
| 1 | Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/ gradient forlaying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed. |
| 2 | Returning, filling in including spreading, leveling, watering and well ramming in layers ofnot exceeding 25 cm thickafter the cables & pipes etc. are laid, jointed & testedand foundations complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 4 | M & L for laying plain cement concrete (1:2:4),type B-2( using 40 mm gradedcrushed stone aggregate) for supporting of CI/DI/GI pipes 0.60 RM below ground level and upto 2 RM aboveand for patching of foundation at E/M installations with smooth finishing without using extra cement, complete all as specified and as directed. |
| 5 | Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 100 mm bore of pipe complete all as specified and as directed. |
| 6 | Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for150 mm bore of pipe complete all as specified and as directed. |
| 7 | Supply, laying, jointing and testing of 100mm diaclass K-9 Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast,with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of black bitumen coating on external surface, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Excavation & earthwork and rubber gasket joint ( push on joints) shall be measured and paid separately under respective item of BOQ. |
| 8 | Supply, laying, jointing and testing of 150mm diaclass K-9 Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast,with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of black bitumen coating on external surface, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed.Notes: Excavation & earthwork and rubber gasket joint ( push on joints) shall be measured and paid separately under respective item of BOQ. |
| 9 | M & L for Run lead joint for CI pipe/DI pipe including spun yarn etc., for spigot and socket pipes and fittings for 150 mm bore, including clauking the spun yarn, complete all as specified and as directed. |
| 10 | M & L for Run lead joint for CI pipe/DI pipe including spun yarn etc., for spigot and socket pipes and fittings for 100 mm bore, including clauking the spun yarn, complete all as specified and as directed. |
| 11 | M & L for Cast Iron fittings for spigot and socketedcast iron pipes for water mains upto 150 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, \"Y\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, complete all as specified and as directed. |
| 12 | Supply and fix DI special suitable fittings such as bens (any type, radius and angle) tapers, Tee pieces single branch, Collars, caps and plugs for DI pipe class K-9 upto 150 mm dia complete all as specified and as directed. |
| 13 | S & F cast iron sluice valve 150mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed. |
| 14 | S & F cast iron sluice valve 100mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed. |
| 15 | M&L for Brick work usingold size sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc for supporting of CI/DI/GI pipes including 12 mm thick rendering in cement mortar 1:6 complete all as specified & directed. |
| 16 | M & L for repairs of old unserviceable filter media consisting of pea gravells of different sizes and coarse sand of appropriate size PVC stainer etc and Filling of new pea gravels, coarse sand, fixing of new PVC stainer and testing complete all as specified and as directed. Note: 1 New pea gravel of different sizes, coarse sand of appropriate size and PVC strainer will be measured and paid separately under respective items as supply only3. Chemical test and bacteriological test should be carried out through Govt laboraty for which rate is included in the unit rate only. |
| 17 | M & L for applying of two coats of Synthetic enamel paintover a coat of red oxide Zinc Chrome primer including preparation of old painted surfaces (as per match of existing colour approved make by GE) after removal ofcomplete rusting of external surfaces of Pressure filter plant complete all as specified and as directed |
| 18 | M&L for applyinga coat of black bituminous paint of approved make on internal surfaces of Pressure filter plant of dia (23 feet & 8 feet )(drinking water quality ) including preparation of old painted surfaces (as per match of existing colour) after complete removal of rusting to the Pressure filter plant complete all as specified and as directed. |
| 19 | M&L for spray painting to exposed surfaces of GI/CI pipe line of any size with two coats of synthetic enameldust and weather proof paint of approve make, (as per existing colour) over a coat of red oxide primer, including preparation of oldsurfaces of pipes,by scraping or complete removal of rusting to the pipes, filling cavities with filler, complete all as specified and directed. |
| 20 | Dismantiling/Removing framed steel work of any description such as in ladder work, bracings/supporting angle iron of Pressure filter plant, rallings, etc completed as specified and directed. |
| 21 | S & F Mild steel screw bolts (machine made) with hexagonal of square heads at one end and screwed the other, or screwed both ends each serewed end to be fitted with washers and one hexagonal or square nut, n exc 10 Cm long 11 to 15 mm each dia, complete as spedified and directed. |
| 22 | S & F rolled mild steel work in joist, Channel, angle,or tee section, fixed independently by welding, posts, braching and purlins etc including special shaped washers, etc complete using but welded of grade Fe-290 with one shop coat of zinc chromate primer paint complete all as specificed and directed |
| 23 | Supply of new PVC strainerssuitable for above horizontal Pessure filter plant vessel complete all as per OEM as directed by Engr-in-Charge. |
| 24 | Supply of coarse sand 0.35 to 0.50 mm(Barakar Origin or equivalent) inside existing Presure filter (for approx 24\" height ) complete all as specified and as directed. |
| 25 | Supply of gravel of size 20 mm to 40 mm inside existing rapid pressure filter(for approx 6\" height ) complete all as specified and directed. |
| 26 | Supply of gravel of size 12 mm to 20 mm inside existing rapid pressure filter (for approx 4\" height ) complete all as specified and directed. |
| 27 | Supply of gravel of size 6 mm to 12 mm inside existing rapid pressure filter(for approx 4\" height ) complete all as specified and directed. |
| 28 | Supply of gravel of size 3 mm to 6 mminside existing rapid pressure filter (for approx 4\" height ) complete all as specified and directed. |
| 29 | S & F butterfly valve of size 150 mm dia conforming to IS 13095 both end flanged including new bolts, nuts, washers and neoprene rubber gasket including taking down old one, complete all as specified and as directed. |
| 30 | S & F cast iron sluice valve 200mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed. |
| 31 | Supply and fixing in repair of digital auto level controller model ALC Mk-I including top mounted, non contact ultrasonic level transmitter (probe unit), level indicating controlling box including system incorporated digital stage level, high & low alarm, pump automation etc. as all complete but without wire from transmitter to controling box as per our enclosed catalogue sensing range upto 5 mtrs complete all as specified and as directed. |
| 32 | S&F in repair PVC insulated unsheathed cable of size 1.5 Sqmm 3 core for replacement of existing worn out/burnt copper wire from proble unit to cotrolling box complete all as specified and directed. |
| 33 | S & F cast iron body and brass gate heavy duty Non Return Valve (NRV), 150 mm dia with by pass arrangement, conforming to IS-5312, both ends flanged with 2 Nos rubbers insertion gasket joints, nuts, bolts and washers of required size and Nos complete including removing /taking down of old unserviceable one, complete all as specified and as directed. |
| 34 | Supply, installation,fixing, commissioning andtestingof column pipe 150/200 mm bore ( length of each column pipe = 3.10meter including flange at both endss) both end flanged made out of GI tubing medium grade welded at end of column pipe cutting of groove to house including3 core 6 Sq mmsubmersible cablesand including cutting& bending in shape as required at site complete all as specified and as directed. |
| 35 | M&L for making fountain system functional incl connectionsfittings and testing offlat jet , cascase, bell fountain lighting water proof LED, filtration system, spray ring, pump, bottom drains, and decorative elements, including alll necessary accessories, screw, nut-bolts , sashers, packing, seal etc. and connection pipe of suitable size complete all as specified and as directed.Note :- The following items36(a) to 43(h) as supply onlyfor the renewal of fountain system measure and paid separately & unit rate quoted by the bidderincluding taking down and fixing also. |
| 36 | (a)Supply only water fountain Nozzle suitable size made of stainless steel. |
| 37 | (b) Supply only crystal ball dandelionWater fountain Nozzle made of stainless steel and in flower shape for outdoor pool. |
| 38 | (c) Supply only automatoc water fill Valve . |
| 39 | (d) Supply only water Proof Fountain LED Lights 30 W ,suitablefor outdoor pool. |
| 40 | (e) Supply only water Inlet/ drain pipe / Over flow pipe of size upto 40 mm GI , ISI Marked . |
| 41 | (f) Supply only waterproof copper cable 3-core 1.5 Sqmm . |
| 42 | (g) Supply only fountain pump motor set (Self primimn monoblock pumps) of capacity |
| 43 | (h) Supply only filter/ strainer system |
| 44 | Supply and fixing of spray nozel brass suitable size for fountain system Complete all as specified and as directed by Engr-in-charge. |
| 45 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling /floor suitable for 15/20 mm dia pipe, complete all as specified and as directed. |
| 46 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling /floor suitable for 25 mm dia pipe, complete all as specified and as directed. |
| 47 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling /floor suitable for 40mm dia pipe, complete all as specified and as directed. |
| 48 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling /floor suitable for 50mm dia pipe, complete all as specified and as directed. |
| 49 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling /floor suitable for 150/100/80 mm dia pipe, complete all as specified and as directed. |
| 50 | S&Ffor GI water tubing mediumgrade, ISI marked,galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed. |
| 51 | S&Ffor GI water tubing mediumgrade, ISI marked,galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed. |
| 52 | S&Ffor GI water tubing mediumgrade, ISI marked,galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed. |
| 53 | S&F in repair for GI water tubing mediumgrade, ISI marked,galvanised, 40 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed. |
| 54 | S&F for GI water tubing mediumgrade, ISI marked,galvanised, 50 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed. |
| 55 | S&Ffor GI water tubing mediumgrade, ISI marked,galvanised, 80 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed. |
| 56 | S&Ffor GI water tubing mediumgrade, ISI marked,galvanised, 100 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed. |
| 57 | S & F gun metal globe or gate valve of 20 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed. |
| 58 | S & F gun metal globe or gate valve of 25 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed. |
| 59 | S & F gun metal globe or gate valve of 40 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed. |
| 60 | S & F gun metal globe or gate valve of 50 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed. |
| 61 | M&L for Boring ofhole under road, pavement, hard standing by using trenchless technique using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed by Engineer-in-Charge.Note : (i)Pipes shall be laid minimum 2.00 mtr below/under existing road surfaces/ apron /floors etc.(ii) T&P requird for road boring to be provided by the contractor at site own cost and no any claim enterained on this accont on later stage. |
| 62 | M & L for rubber gasket joints (push on joints) for spigot/ socket end ductile iron water mains/ductile iron specials complete for 100/150 mm nominal dia complete all as specified and as directed. |
| 63 | S & F in repair fully automatic DOL Starter suitable upto 5 HP Submersible Pump motor set 3 Phase 415 volt, over load relay 14 to 25 Amp fitted on CRCA sheet box including connecting copper wire 10 Sqmm double core of suitable length, complete all as specified and as directed. |
| 64 | S & F in repair water proof un armoured multistranded copper cable 10 Sqmm, three core, 3 phase, 440 volts, complete all as specified and as directed. |
| 65 | Material and labour for 3 phase submersible pump- motor set of capacity 03 HP with new PVC insulatedd super enammel copper wire of suitable gauge, incl suitable PCC foundation base with nut- bolts and anhle rail chanels of suitable size andall acessories complete all as specified and as directed. |
| 66 | Supply, installation,fixing, commissioning andtestingof column pipe 50 mm bore ( length of each column pipe = 3.10meter including flange at both endss) both end flanged made out of GI tubing medium grade welded at end of column pipe cutting of groove to house including groove to house submerissible cables, cutting,bending in shape as required at site and taking down existing pipe complete all as specified and as directed. |
| 67 | Supply and connection in repairs spray nozzle gun for vehicle washing water pressure system including 08 mtr heavy duty water pipe of suitable size complete all as specified and as directed. |
| 68 | Supply, installation,fixing, commissioning andtestingof column pipe 150 mm bore ( length of each column pipe = 3.10meter including flange at both endss) both end flanged made out of GI tubing medium grade welded at end of column pipe cutting of groove to house including groove to house submerissible cables, cutting,bending in shape as required at site and taking down existing pipe complete all as specified and as directed. |
| 69 | M & L forconstruction of old broken brick masonry valve chamber with PCC (1:3:6) type C1 as in foundation and full brick wall of size (1000x1000x1000) cm (internal dimension), 2mm thick MS cover with locking arrangement, welded on angle iron frame of size 40x40x6mm, embedded on top of valve chamber, including and painted with two coats of synthetic enamel paint over a coat of red-oxide primer, including necessary work etc., complete all as specified and as directed. |
| 70 | M & L forconstruction of old broken brick masonry valve chamber with PCC (1:3:6) type C1 as in foundation and full brick wall of size (1500x1500x1500) cm (internal dimension), 2mm thick MS cover with locking arrangement, welded on angle iron frame of size 40x40x6mm, embedded on top of valve chamber, including and painted with two coats of synthetic enamel paint over a coat of red-oxide primer, including necessary work etc., complete all as specified and as directed. |
| 71 | M & L forconstruction of old broken brick masonry valve chamber with PCC (1:3:6) type C1 as in foundation and full brick wall of size (900x900x900) cm (internal dimension), 2mm thick MS cover with locking arrangement, welded on angle iron frame of size 40x40x6mm, embedded on top of valve chamber, including and painted with two coats of synthetic enamel paint over a coat of red-oxide primer, including necessary work etc., complete all as specified and as directed. |
| 72 | S & F cast iron foot valve, 150mm dia, ISI marked both ends flanged with nut, bolts, washers and rubber gasket confirming to IS: 4038, installation, testing complete including taking out old one complete all as specified and as directed. |
| 73 | M & L for painting of external surfaces of any type of angle Iron structures at filtration plant / pump house and cove plate of valve pit chambers / water duct cover sheetwith two coats of Synthetic enamel paint of colour Red/ Brown after single coats of red oxide Zinc Chromeapproved make including preparation of old rusted/painted surfaces complete removal of rusting and preparation of surfaces, complete all as specified and as directed. |
| 74 | M&L for Brick work usingold size sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc including dismantling of existing brick work complete all as specified & directed. |
| 75 | M&L for rendering 10 mm thick cement plastering onfair face of brick masonry/concrete surface etcin cement mortar(1:4) surface finished even & smooth without using extra cement complete all as specified and directed. |
| 76 | Supply and fix in repairs contactor3 -Poles suitable for Motor Rating AC-3 Duty, 415V, 50Hz, 3 Ph for 15 HP centrifugal pump setmax relay setting 20-30 Amps, coil voltage 380 Volt including all accessories in moulded in Sheet-Enclosure type complete all as specified and directed by Engineer-in- Charge. (Make: Havells/BCH/Siemens). |
| 77 | M & L for Cutting existing bituminous roadwith width not exceeding 750 mm and 1.5 m deep for laying of water mains and filling back with excavated soil except road portion which shall be make good usinginstant patch mate to match up the existing road surface complete all as specified and directed. Note: unit rate quoted by bidder inclusive in all aspect here-in-before in description of item and not any claim entertain at later stage. |
| 78 | Supply and fix fully automatic star delta starter suitable in Sheet-Steel Enclosure Type (Motor Rating AC-3 Duty, 415V, 50Hz, 3 Ph) for 15 HP centrifugal pump setmax relay setting 20-30 Amps, coil voltage 380 Volt including all accessories.complete all as specified and directed by Engineer-in- Charge. |
| 79 | S&F UPVC water tubing / pipeISI marked, of size 25 mm bore with and including all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches/ wall surface and ceiling or laid in floors incl necessary fixing clamp/ bands, shadle etc. complete all as specified & directed. |
| 80 | S & F MS steel chequered plate with anti -skidin required shape / size by curtting ,welding and brazing ,etc including special shaped washers, hinged etc. complete with both side suitable side of lifting arrangements incl one coat of zinc chromate primer and two coat of approved synthetic enamelled paint complete all as specificed and as directed |
| 81 | S& F in repairs chemical ( fluid) dosing systempump unit / moduleoperates on single phase power supply 230 V, 50Hz, Intregated plug and play systems , discharge rate upto 100 Ltrs per Hours and can handle back pressure upto 10 Bars, with powerfull motorised fluid delivery drive automitacially and proportional dose adjustment options and 100 Ltrs storage capacity of chemical solutions, compact universal fluid drive unit for non gaseeouse chlorine disinfectants, flocculant, incl connection and testing for 2 PPM clorination in supply water linecomplete all as specified and as directed. Make : Declibac/ Potter & Watts / Brio Zing |
| 82 | S & F in repairs Integral decorative LED bollard lights ( Warm white in colour)with polycarbonate diffuser with IP 65 protection suitable for 10/11 watts LED with necessary MS basemade out of MS sheet of suitable size abbended in PCC 1:2:4 base, incl elecrical connections with adequate sizecomplete as all specified and as directed. Make:Havells/ Wipro/Philips. |
| 83 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting 90 W luminaire with high power LEDs as light source and electronic driverwith pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from junction box to light fitting including suitable size of junction box , one no\"s of 6 amp MCB and connected items bolts nuts clamps etc. and including necessary 40mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make:Havells/ Wipro/Philips. |
| 84 | S & F LED Flood lights 120 Watts of Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 luminaire with high power LEDs as light source and electronic driverwith pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from junction box to light fitting including suitable size of junction box , one no\"s of 6 amp MCB and connected items as bolts nuts clamps etc. and including necessary mounting frame structure required in shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make:Havells/ Wipro/Philips . |
| 85 | Repairs and maintenance of Chemical Dozing pumps of any make and capacityincluding fixing of replacement of defective / unserviceable spare parts suction/discharge pipe 3/8\", duck bill & connecting nut 3/8\" etc after taking out the old ones with new ones complete : Note :-(i)Cost of minor repairs / replacement of minor spares such as nuts, bolts, washers etc. are deemed to be included in the unit quoted rates. (ii) The cost of transportation to nearest workshop & back after repair if necessary is deemed to be included in the unit quoted rates. (iii) Spare parts such as pump tube, Injection Check valve,foot valve 3/8\" & connecting with adapter 3/8\"as & when required for renewal shall be measured and paid separately. |
| 86 | Supply onlypump tube of Chemical Dozing pumps complete all as specified and directed. |
| 87 | Supply only injection Check valve of chemical Dozing Pumps, complete all as specified and directed. |
| 88 | Supply and fixing only foot valve 3/8\" of chemcial dozing pumps, complete all as specified and directed. |
| 89 | Supply only connecting with adapter 3/8\" of Chemical dozing pumps, complete all as specified and directed. |
