Tender For Open Inspection Of Crystallizers And Product Hoppers And Repair (If Any), Open Inspection/ Pressure Testing Of V-9001 E1 Heater, Gasket Replacement Of Oxime As Preheater Etc. During Ata-2026 At Nas Plant Open Inspection Of Crystallizers And Pro, Udyogamandal-Kerala
TDR : 53636883
Tender Notice
BOQ
14 Days Left
Udyogamandal
Kerala
Tender For Open Inspection Of Crystallizers And Product Hoppers And Repair (If Any), Open Inspection/ Pressure Testing Of V-9001 E1 Heater, Gasket Replacement Of Oxime As Preheater Etc. During Ata-2026 At Nas Plant Open Inspection Of Crystallizers And Pro
Name of Work: Open Inspection of Crystallizers and Product Hoppers and repair (if any), Open inspection/ Pressure Testingof V-9001 E1 Heater, Gasket Replacement of Oxime AS Preheater etc. during ATA-2026 at NAS Plant.
Sl. No.
Item Description
1
Open Inspection of Crystallizers and Product Hoppers and repair (if any), Open inspection/ Pressure Testingof V-9001 E1 Heater, Gasket Replacement of Oxime AS Preheater etc. during ATA-2026 at NAS Plant.
2
Open inspection of crystallizers , product hoppers etc. and carrying out the repair works
3
Repairing / replacing the damaged bottom portion of product hopper above the slide valve and replaced portion shall be painted with one coat of red oxide zinc phosphate primer and one coat of chlorinated rubber finish paint of approved brand and colour after proper surface cleaning.Note: Cost of painting & painting materials shall be included.
4
Opening the manholes/dummies of vessels/tanks for inspection & closing back the same with new gaskets & fasteners.
5
Fabrication of damaged product line with necessary fittings below rotary valvePipe Size:14 inchMaterial: MS/SS
6
Erection of fabricated item as mentioned in schedule 4 after dismantling the damaged portion and proper surface cleaning & application of one coat of red oxide zinc phosphate primer and one coat of chlorinated rubber finish paint of approved brand and colour. Note: Cost of painting & painting materials shall be included.
7
Open inspection and pressure testing of V 9001 E1 heater
8
Tube plugging & seal welding.( (Tube OD 38.1mm,wall thickness : 1.6 mm)Note: Unit rate shall be quoted for plugging both ends of each tube
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
