|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depthupto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth. |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. |
| 7 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. |
| 8 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement 25 mm thick |
| 9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete. |
| 10 | 12 mm cement plaster: 1:6 (1 cement : 6 fine sand). |
| 11 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand). |
| 12 | 15 mm cement plaster finished with a floating coat of neat cement : 1:4 (1 cement : 4 fine sand) |
| 13 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work |
| 14 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. |
| 17 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge. |
| 18 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 19 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 20 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 21 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 22 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 24 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia |
| 25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 26 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 27 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe |
| 28 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS : 3989. |
| 29 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100 mm Sand cast iron S&S as per IS - 3989 |
| 30 | Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 3989 |
| 31 | Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 3989 |
| 32 | Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter:100 mm |
| 33 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge PN - 16 Pipe, 32 mm OD (SDR-7.4) |
| 34 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on walls. PN - 16 Pipe, 20mm OD (SDR-7.4). |
| 35 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on walls. PN - 16 Pipe, 25mm OD (SDR-7.4). |
| 36 | Providing and fixing PPR Unions PPR Union 20mm. |
| 37 | Providing and fixing PPR Unions PPR Union PPR Union 25mm. |
| 38 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 39 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) 32mm nominal bore |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 41 | Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 80 mm long, weighing not less than 46 gms |
| 42 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. : 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 43 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 30cm length |
| 44 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter |
| 45 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe |
| 46 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 47 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5. |
| 48 | Estimate cost after using Correction factor on DSR 2023 on account of GST @ 0.973(Sr 1 to 47) |
| 49 | Add cost Index On DSR 2023 @ 23.36% (Sr 1 to 47) |
| 50 | Cleaning of septic tank including taking out sludge from the septik tank and disposal of the same within 50 mtrlead all complete as per the direction of engineer in charge. |
| 51 | Taking out existing steel door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of damage mild steel sheet sheethinges and necessary fittings with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 52 | (Electrical Work Item) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group- A. |
| 53 | Wiringfor circuit / submain wiring alongwith earth wire with following size ofFRLSPVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required .(a) 2 X 1.5 sq.mm +1 X 1.5 sq.mm Earth wire |
| 54 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 55 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm |
| 56 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 57 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 58 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 59 | Supplying & Fixing 5 amps to 32 amps rating , 240 volts, C series, MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing & Commissioning etc as required.(A) Single Pole |
| 60 | Supplying & Fixing 5 amps to 32 amps rating , 240 volts, C series, MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing & Commissioning etc as required. (B) Double pole- 32 A |
| 61 | Earthing with G I earth pipe 4.5 m long 40 mm dia i/c assesories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etcwith charcoaland salt as reqd. |
| 62 | Supply and fixing 6 SWG GI wire on surface or in recess for loop earthing along with existing/recessed conduit/ submain wiring/cable etc as required. |
| 63 | Supplying and making end termination with brass compression gland and aluminium lugs for 2 X 10 sq. mm (19mm)sq. of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 64 | Supplying & making endterminaton with brass compression gland and aluminium lugs for 3½ X 35 sq. mm (32mm)PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 65 | Providing and fixing 125 A, 4 Pole, 36 KA rating and breaking capacity MCCB withthermomagnetic release and terminal spreaders in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required |
| 66 | Supplying and fixing4 Way , Double door, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, minimum IP 43 Protection in DB, powder painted including earthing etc. as required. (But without MCB / RCCB /Isolator) |
| 67 | Supplying and fixing G.I. pipe of 40 mm dia medium dutyfor protection of UG cable etc. as required of ISI marked of make Jindal/ Hindustan / Prakash. |
| 68 | Supplying and fixing of 12 W LED 6500 K surface mounted slimmest recess com surface panel, LED downlight cool white, aesthetically designed aluminium housing enclosures with constent drive including making connection etc. as required |
| 69 | Supplying and fixing of 50 watt LED Flood Lights with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance including wiring with 3 x 1.5 Sqmm (from ceiling rose to LED fitting), PVC insulated, multi core, copper conductor cable & making connection of LED street light luminaire etc as required. |
| 70 | Supplying & laying of one numberXLPE insulated and PVC sheathed,XLPE power cable of 1.1 KV Grade of size 3.5 x 35 Sq. mm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 71 | Supplying & laying of one numberXLPE insulated and PVC sheathed,XLPE power cable of 1.1 KV Grade of size 2 X 10 Sq. mm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 72 | Supplying and Laying of one number XLPE insulated and PVC sheathed aluminium conductor power cable of 1.1 KV grade of size 2 X 10 sq.mm in the RCC/HUME/ METAL as required.Conf. to IS:7098 part - I of make Havells/Polycab/KEI/Plaza/Kalinga/Gloster |
| 73 | Providing & fabrication of outdoor cubical panel Compartmental type feeder piller, double door made out of 16 SWG CRCA sheet of size600 mm X 600 mm X 450 mm deep having 415 Volt, 3 - Phase 200 amps, 04 nos insulated aluminium bus bars,Channel for DP MCB mounting in compartment and to accommodateaccessories, front & back door openable, R-Y-B LED indicators and P & F of internal connection with suitable size of cu wires, accessories & angle iron frame with 600 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. Compartment will be made as per direction of Engineer- in-charge. |
