|
| 1 | S&F MCB in replacement of TPN 63 Amps 240 V,10KA, \"C\" series, with copper lugs complete all as specified and directed . Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 2 | S&F MCB in replacement of TPN 100 Amps 240 V, 16KA, \"C\" series, with copper lugs complete all as specified and directed . Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 3 | S&F MCB in replacement of TPN 125 Amps 240 V, 16KA, \"C\" series, with copper lugs complete all as specified and directedMake :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 4 | S&F in repair/replacement of Circuit/submain wiring alongwith earth wire 2 runs x 1.5 sqmm + 1 run x 1.5 sqmm with FRLS-H PVC insulated unsheathed 1100 volts grade copper conductor, single core multi stranded cable drawn through and including medium grade rigid PVC conduit not less than 20 mm dia (Existing / new) conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers lugs etc of suitable size but not less than 20 mm concealed in wall/ floor etc including taking down old U/S submain wiringcomplete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length. |
| 5 | All as per srl item No. 4 here-in-before but of size 2 runs x 2.5 Sqmm + 1 run x 2.5 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 6 | All as per srl item No. 4 here-in-before but of size 2 runs x 4 Sqmm + 1 run x 4 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 7 | All as per srl item No. 4 here-in-before but of size 2 runs x 6 Sqmm + 1 run x 6 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 8 | All as per srl item No. 4 here-in-before but of size 2 runs x 10 Sqmm + 1 run x 10 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 9 | S & F in repair/replacement Regid non-metallicPVCconduit medium gradenot less than 20 mm dia (external) ISI marked (concelaled or surface as per site requirement) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etccomplete including cutting necessary chases on wall/ceiling surfaces for drawing of conduit and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed |
| 10 | All as per srl item No. 9 here-in-before but of casing capping complete all as specified and directed. |
| 11 | All as per srl item No. 9 here-in-before but of size 25 mm dia complete all as specified and directed. |
| 12 | M&L for Modular PVC surface conduitpoint wiring one lightcontrolled by one modular switch with PVC insulated and unsheathed, FRLS-H 1100 volt grade electric cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with multistranded copper conductor single core in and including rigid PVC surface conduit not less than 20 mm dia, clip, with suitable MS terminal boxes( not less than 1.6 mm thick)and painted with one coat of red oxide primer all around and two coats black bituminous paint out side and two coat of aluminium paint from in side including earth dolly and 1.50 sqmm green multistranded copper conductor as continuous earth wire with all accessories including lugs required, complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed. Note : Modular matching cover frame pates of different sizes shall be measured and paid separately. |
| 13 | All as per Srl item No.12 above but one fan / Exhaust fan point controlled by one modular switch &modular regulator . |
| 14 | All as per Srl item No.12 above but one 06 Amp socket outlet point controlled by one modular switch on independent board . |
| 15 | All as per item No.12 above but one 06 Amp socket outlet point controlled by one modular switch on same board . |
| 16 | All as per item No.12 above but one bell/buzzer point controlled by one modular bell switch. |
| 17 | All as per item No. 12 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 18 | M & L for Modular concealed point wiring for one lightcontrolled by one modular switch with PVC insulated and unsheathed FRLS-H cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, withmodular MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats black bituminous paint out side and two coat of aluminium paint from in side including earth dolly and 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed.Note : Modular matching cover frame pates of defferent sizes areshall be measured separately. |
| 19 | All as per Srl item No.18 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator. |
| 20 | All as per Srl item No.18 above but one 6 Amp socket outlet point controlled by one modular switch on independent board. |
| 21 | All as per Srl item No.18 above but one 6 Amp socket outlet point controlled by onemodular switch on same board. |
| 22 | All as per Srl item No.18 above but one bell / buzzer point controlled by one modular bell switch |
| 23 | All as per item No. 18 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 24 | M&L for Modular Casing Caping 20mm point wiring one lightcontrolled by one modular switch with PVC insulated and unsheathed FRLS-H cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with stranded copper conductor single core 1100 volts grade in and includingPVC casing caping, with modular MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats black bituminous paint out side and two coat of aluminium paint from in side including earth dolly and 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed.Note : Modular matching cover frame pates of defferent sizes areshall be measured separately. |
| 25 | All as per Srl item No.24 above but one fan / Exhaust fan point controlled by one modular switch . |
| 26 | All as per Srl item No.24 above but one 6 Amp socket outlet point controlled by one modular switchon independent board. |
| 27 | All as per Srl item No.24 above but one 6 Amp socket outlet point controlled by one modular switch on same board. |
| 28 | All as per Srl item No 24 above but one bell / buzzer point controlled by one modular bell switch |
| 29 | All as per item No. 24 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 30 | M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, FRLS-H 1100 volt grade electric cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with multistranded copper conductor single core in and including rigid PVC surface conduit medium grade not less than 20 mm dia, clip, with suitable MS terminal boxes( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 31 | All as per Srl item No.30 above but one fan / Exhaust fan point controlled by one switch & regulator. |
| 32 | All as per Srl item No.30 above but one 6 Amp socket outlet point controlled by one switch on independent board . |
| 33 | All as per Srl item No.30 above but one 6 Amp socket outlet point controlled by one switch on same board . |
| 34 | All as per Srl item No.30 above but one bell/buzzer point controlled by one switch . |
| 35 | All as per Srl item No 30 above but one light point controlled by two 2-way switch . |
| 36 | All as per item No. 30 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 37 | M&L PVC casing caping 20 mm point wiring for one lightcontrolled by oneswitch complete with PVC insulated and unsheathed FRLS-Hcable of 1.5 sqmm including taking down of old U/S point wiring(nominal area) with stranded copper conductor single core 1100 volts grade in and includingPVC casing caping 20 mm, withMS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dollywith3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multistranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 38 | All as per Srl item No.37 above but one fan / Exhaust fan point controlled by one switch . |
| 39 | All as per Srl item No.37 above but one 6 Amp socket outlet point controlled by oneswitch on independent board. |
| 40 | All as per Srl item No.37 above but one 6 Amp socket outlet point controlled by oneswitch on same board. |
| 41 | All as per Srl item No 37 above but one bell / buzzer point controlled by one bell switch |
| 42 | All as per item No. 37 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 43 | M&L normal concelled point wiringfor one lightcontrolled by oneswitch complete with PVC insulated and unsheathed flame retardant Low Smoke(FRLS-H)cable of 1.5 sqmm including taking down of old U/S point wiring(nominal area) with multistranded copper conductor single core 1100 volts grade with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dollywith3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 44 | All as per Srl item No.43 above but one fan / Exhaust fan point controlled by one switch . |
| 45 | All as per Srl item No.43 above but one 6 Amp socket outlet point controlled by oneswitch on independent board. |
| 46 | All as per Srl item No.43 above but one 6 Amp socket outlet point controlled by oneswitch on same board. |
| 47 | All as per Srl item No 43 above but one bell / buzzer point controlled by one bell switch |
| 48 | All as per item No. 43 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 49 | S&F switch piano flush button type 6 Amp (PC) single pole one waycomplete all as specified and asdirected. |
| 50 | S&F socket outlet white 3 pin, 6 Amp (PC) flush type complete all as specified and asdirected. |
| 51 | S&F switch pianoflush button type 16/20 Amp (PC) single pole one way complete all as specified and asdirected. |
| 52 | S&F socket outlet white 2 in1, 3 pin, 16 Amp (PC) flush type complete all as specified and asdirected. |
| 53 | S&F switch piano whiteflush button type 6 Amp (PC) single pole 2 way complete all as specified and asdirected. |
| 54 | S & F delux Fan Regulator white electronic rotary, step/socket type 240 Volt50 Hz complete all as specified as directed. |
| 55 | S&F switch bell push white button type6 Amp (PC) single polecomplete all as specified and asdirected. |
| 56 | S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and asdirected. |
| 57 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings 240 volt-50 Hzcomplete all as specified as directed. |
| 58 | S & F 10W LED lamp B22 CDL,Lumen output 950 Im, 6500 K, 60 mm dia complete all as specified as directed.MAKE:- Havells/Bajaj/Crompton /Philips/Oriant |
| 59 | S & F 10W LED lamp E27 WW,Lumen output 950 Im, 3000 K, 60 mm dia complete all as specified as directed.MAKE:- Havells/Bajaj/Crompton /Philips/Oriant |
| 60 | S&F ceiling rose pilot ,surface POLYCARBONATE 65 x50mm three terminals completeall as specified and asdirected. |
| 61 | S & F modular switch one way 06 Amp,1 module complete all as specified and asdirected . |
| 62 | S&F modular socket 06 Amp, 2/3 pin combined 2 modulecomplete all as specified and asdirected. |
| 63 | S & F modular switch one way 16 Amp,1 module complete all as specified and asdirected. |
| 64 | S & F modular socket 16 Amp, 2/3 pin combined 2 modulecomplete all as specified and asdirected. |
| 65 | S & Fmodular Fan Regulator fan socket type regulator,2 module complete all as specified as directed. |
| 66 | S&F modular bell push 10 Amp ,1 module complete all as specified and asdirected. |
| 67 | S&F Modular matching cover frame platesfor 1/2 modules boxcomplete all as specified and as directed. |
| 68 | S&F Modular matching /outer cover frame plate white for 3 modules complete all as specified and as directed. |
| 69 | S&F Modularmatching /outer cover frame plate white for 4 modulescomplete all as specified and as directed. |
| 70 | S&F Modularmatching /outer cover frame plate white for 6 modules complete all as specified and as directed. |
| 71 | S&F Modularmatching /outer cover frame plate white for 8 modules complete all as specified and as directed. |
| 72 | S&F Modular matching/ outer cover frame plate white for 12 modulescomplete all as specified and as directed. |
| 73 | S&F Modular matching blanker white complete all as specified and as directed. |
| 74 | Supply and fix in repiar/ replacement MCB distribution board, SPN, 4 way with provision of suitable MCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar 100 Amps, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down old U/S distribution box all as specified and directed.Note: MCCB / MCBs shall be measured and paid separately. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 75 | All as per srl item No. 74 here-in-before but SPN 8 way DB complete all as specified and directed. |
| 76 | All as per srl item No. 74 here-in-before but SPN 12 way DB complete all as specified and directed. |
| 77 | Supply and fixing in repair/ replacement of sheet metal enclosure SPN 2 way,single door with taking down old U/S distribution box ,240 V fixing in consealed or surface complete all as specified and as directed. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 78 | Supply and fixing in repair/ replacement of plastic MCB enclosure SPN 2 way,single door with taking down old U/S distribution box ,240 V fixing in consealed or surface complete all as specified and as directed. |
| 79 | S&F in replacement of MCB DP 32 Amp 240 V ,10KA ,\"C\" series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 80 | S&F in replacement of MCB DP 40 Amp 240 V ,10KA ,\"C\" series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 81 | S&F in replacement of MCB DP63 Amp 240 V ,10KA ,\"C\" series, with copper lugs complete all as specified and directed. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 82 | S&F MCB in replacement of MCB SP 6 to 32 Amps 240 V,10KA, \"C\" series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 83 | M & L and taking down old U/S twin core cable and Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor standard, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 1100 V size 6 sq mm to be connected to existingMCB box / Main switches complete all as specified as directed. |
| 84 | All as per srl item No. 83 here-in-before but twin core cable of size 10 sq mm complete all as specified and directed. |
| 85 | All as per srl item No. 83 here-in-before but twin core cable of size 16 sq mmcomplete all as specified as directed. |
| 86 | Supply and fix MCCB / MCB distribution board, Vertical TPN, 4 way with provision of suitable MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar 100A to 125A, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.Note: MCCB / MCBs shall be measured and paid separately. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 87 | Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type withIP 43 degree of protection with built in copper bus bar 100A to 125A, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.Note:MCBs shall be measured and paid separetely. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 88 | S&F in replacement of MCCB 63 Amps,4 pole,415volts,3 phase,50HZ, having 16 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70- 100% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 89 | S&F in replacement of MCCB 100 Amps,4 pole,415volts,3 phase,50HZ, having 16 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70- 100% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 90 | S&F in replacement of MCCB 125 Amps,4 pole,415volts,3 phase,50HZ, having 16 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70- 100% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.make:- havells,abb,polycap,legrand. |
| 91 | S & F in replacement of decorative wall light fixture type made of polycarbonate , including LED Bulb 10 Watts complete all as specified as directed . |
| 92 | S & F in replacement of decorative wall mounting ,champagne gold finish fixture with plastic body diffuser including LED Bulb 10 Watts complete all as specified as directed . |
| 93 | S & F in replacement of decorative wall mounting fixture in durable plastic body designer mesh type in golden finish including LED Bulb 10 Watts complete all as specified as directed . |
| 94 | Supply and fix in replacement ofintegrated LED batten tubelight 20 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 95 | Supply and fix in replacement ofintegrated LED battentubelight 20 watt, 4 feet long Triyca Light three color (cool white, nature white & warm white) CCT change IED batten which can change the color of batten fron warn white to natural white to cook white with of a simple toggle swich connecting up with to twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directedMake Heavells / Bajaj / crompton / phillips. |
| 96 | Supply and fix in replacement ofintegrated LED batten tubelight 10 watt, 2 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 97 | Supply and fix in replacement ofintegrated LED batten tubelight 10 watt, 2 feet long, warm white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 98 | S&F in replacement of 36 W2 feet X 2 feet LED Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed . MAKE:- Havells/Bajaj/Crompton /Philips |
| 99 | S&F in replacement of 36 Wwarm white 2 feet X 2 feet LED Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed . MAKE:- Havells/Bajaj/Crompton /Philips |
| 100 | Supply and fix in replacement of LED bulkhead luminaire 10W in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection complete all as specified and directed by Engineer-in-Charge. MAKE:- Havells/Bajaj/Crompton /Philips |
| 101 | Supply and fix in replacement of garden light fitting 15 watts including prov of LED Bulb with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of 25mm dia medium grade GI pipe of length upto 1m and fixing on ground with pcc coping 1:2:4 using 20 mm size stone aggregate upto 30 cm and provision of 3 core twisted flexible copper cable of size 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed. |
| 102 | Supply and fix in replacement of post top lantern light fitting 15 watts including prov of LED Bulb with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of 25mm dia medium grade GI pipe of length 0.50m bent to required shape and fixing on ground/walls with pcc 1:2:4 using 20 mm size stone aggregate upto 30 cmand provision of 3 core twisted flexible copper cable of size 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed. |
| 103 | Supply and fix in replacement of sleek round recessed cum surface mounting LED down light 15 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 104 | Supply and fix in replacement of sleek square shape recessed cum surface mounting LED down light 15 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 105 | S&F in replacement of 24 W LED panel 1 feet X 1 feet , 220-240V AC,2400 lumen,50Hz with 1 driverrecessed mounting downlighter with IP 20 complete all as specified and as directed. |
| 106 | S&F in replacement of 70 W LED 6000K exclusive innovative designed, long life versatile pressure dia-cast aluminiumflood light luminaire with high power LED as light source. incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 107 | S&F in replaceent of 50 W LED 6000K exclusive innovative designed, long life versatile pressure dia-cast aluminiumflood light luminaire with high power LED as light source. incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 108 | Supply and fix in replacement of Circular LED Highbay light fitting 80 Watts, Integral product with LED driver, aluminium heat sink for better thermal management, Polycarbonate high transmitivity lens and 3 core wire out for input power, with IP65 degree of protection, including taking down existing highbay light fitting of any description at any height from workshops / aircraft hangars complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 109 | Supply and fix in replacement of Circular LED Highbay light fitting 120 Watts, Integral product with LED driver, aluminium heat sink for better thermal management, Polycarbonate high transmitivity lens and 3 core wire out for input power, with IP65 degree of protection, including taking down existing highbay light fitting of any description at any height from workshops / aircraft hangars complete all as specified and directed. |
| 110 | Supply and fix in replacement of LED bldg security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25 mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 111 | S & F in replacement of sheet metal enclosure with two pin socket , 20A SP with MCB 20A/32 A SP ‘C’ series with Plastic Box chain plug cover complete all as specified and as directed. |
| 112 | S & F in replacement of MCB protected plug socket power units 20A/25A SP with MCB 20A/25 A SP ‘C’ series fixed in concealed or surface complete all as specified and as directed. |
| 113 | Supply and fix in replacement of Switch socket combination 2 in 1, 6 pin, 6 and 16 Amp flush type universal including taking down existing unserviceable switch socket combination of any description complete all as specified and directed. |
| 114 | S & FSingle Phase Static Energy meter of Accuracy Class 1.0, 240V, 50Hz, with Backlit LCD, Optical port, Display of rating 10-60A with DLMS Compliance as per IS 15959 (Measures kWh, kVAh, V,I, PF, frequency, kW, kVA, six months history of Energy & MD in kW & kVA and anti tamper features and load profile) with transparent hinge type box complete all as specified and as directed by Eng-in-Charge.Make L&T/HPL/ABB |
| 115 | S & FAC Three Phase Static Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Backlit LCD Display of rating 10-60A. (Measures & displays kWh Only) with Transparent Hinge type Box complete all as specified and as directed by Eng-in-Charge. Make L&T/HPL/ABBNote: - Old U/s Electric meter shall be deposited in MES Store. |
| 116 | S&F in replacement of 40/42W2 feet X2 feet LED Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose complete all as specified and directed .MAKE:- Havells/Bajaj/Crompton /Philips |
| 117 | S&F in replacement of 40/42W warm white panel2 feet X2 feet LED Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose complete all as specified and directed .MAKE:- Havells/Bajaj/Crompton /Philips |
| 118 | S&F in replacement of decorative gate light 250 mm made up of high grade unbreakable polycarbonate material suitable for retrofit bulb upto 20 W LED lamp complete all as specified and as directed. |
| 119 | S&F in replacement of decorative gate light 200 mm made up of high grade unbreakable polycarbonate material suitable for retrofit bulb upto 20 W LED lamp complete all as specified and as directed. |
| 120 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 3.0 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1,with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
| 121 | Supply only switch piano (PC) flush button type 10 Amp single pole one waycomplete all as specified and asdirected. |
| 122 | Supply only socket (PC) outlet white3 pin, 10 Amp flush type complete all as specified and asdirected. |
| 123 | Supply only socket outlet (PC) white 2 in1, 3 pin, 10 Amp and 20 Amp flush type complete all as specified and asdirected. |
| 124 | Supply only delux Fan Regulator whiteelectronic rotary, socket type 240 Volt50 Hz complete all as specified as directed. |
| 125 | Supply only switch bell push (PC) white button type6 Amp single polecomplete all as specified and asdirected. |
| 126 | Supply only Bell,DING DONG AC 230Volts,single pole type complete all as specified and asdirected. |
| 127 | Supply only modular switch one way 10 Amp,1 module complete all as specified and asdirected . |
| 128 | Supply only modular socket 10 Amp,2/3 pin combined 2 modulecomplete all as specified and asdirected. |
| 129 | Supply only modular switch one way 16 Amp,1 module complete all as specified and asdirected. |
| 130 | Supply only modular socket 16 Amp, 2/5 pincomplete all as specified and asdirected. |
| 131 | Supply onlymodular Fan Regulator fan step type regulator,1 module complete all as specified as directed. |
| 132 | Supply onlymodular Fan Regulator fan socket type regulator,2 module complete all as specified as directed. |
| 133 | Supply onlyin replacement of LED lights fitting 22 Watt, 220V,6500 K decorative ultra slim LED tube light polycarbonate body connecting up to from existing/ new ceiling rose complete all as specified and directed . |
| 134 | Supply only 10W LED lamp B22 CDL,Lumen output 950 Im, 6500 K, 60 mm dia complete all as specified as directed.MAKE:- Havells/Bajaj/Crompton /Philips/Oriant |
| 135 | Supply only 10W LED lamp E27 ww,Lumen output 950 Im, 6500 K, 60 mm dia complete all as specified as directed. MAKE:- Havells/Bajaj/Crompton /Philips/Oriant |
| 136 | Supply and fix in replacement of LED bldg security light fitting 45 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25 mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 137 | Supply and fix in replacement ofintegrated LED batten tubelight 22 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 138 | Supply and fix in replacement ofintegrated LED batten tubelight 22 watt, 4 feet long, warm white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 139 | Supply only LED T/L fitting completre with basic all porpose surface and wall mountedled batten with aluminium housing & intergrated elecotronic driver 10 watt capacity 2 feet long and incl connection from ceiling rose complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 140 | Supply and fix in replacement ofintegrated LED batten tubelight 20 watt, 4 feet long, warm white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 141 | S&F MCB in replacement of MCB SP 40 Amps 240 V,10KA, \"C\" series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 142 | S&F MCB in replacement of MCB SP 63 Amps 240 V,10KA, \"C\" series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
