|
| 1 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 2 | M&L for Ceramic Paved tiles of size 400 x 400 x 10 to 12 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for Chequered cement concrete tiles of size 30 cmx 30 cm x25 mm thick with grey cement and pigment, top surface treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 4 | Demolition of cement concrete in ground floor and paving\"s n exc. 15 cm thickness (below or above the ground level)(Un-reinforced) and removing to a distance not exc 50 meter complete all as specified and directed |
| 5 | M&L 75mm thick PCC 1:3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with scaling compound grade \"A\" where required complete all as specified and as directed. |
| 6 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 7 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete aa as specified and as directed. |
| 8 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 9 | Dismantling posts or struts Posts embedded in natural ground (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.Complete all as specified and as directed |
| 10 | Dismantling fencing wire mesh, any type /chain link fencing any size.Complete all as specified and as directed. |
| 11 | Excavating in post holes in soft/loose soil(or similar holes) each n. exc 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good complete all as specified and directed. |
| 12 | M&L Plain Cement Concrete type C2 (1:3:6) using 40 mm graded aggregate) in Foundation, Filling and Mass Concrete, complete all as specified and as directed. |
| 13 | M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels,benching/haunching of manhole, road side drains includng use & waste of formwork complete all as specified and directed. |
| 14 | S&F Posts and Sruts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.complete all as specified and as directed |
| 15 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed |
| 16 | Supply only chain link fencing any size and type completeall as specified and directed. |
| 17 | S&F 12 mm dia MS bolts purpose made with hexagonal or square head on one end and screwed the other, screwed and fitted with nut and washer, length of bolt exc 10cm and n exc 15cm long completeall as specified and directed. |
| 18 | S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard rails strain -ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured.) completeall as specified and directed. |
| 19 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 20 | Demolition of reinforcement cement concrete in roofs, floors(other than ground floor),beams, staircases, landing, chajjas, slabs and similar suspended workcomplete all as specified and directed. |
| 21 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 22 | Labour only Brick Work using old bricks obtained from demolition, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 23 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed. |
| 24 | M&L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement complete all as specified and directed. |
| 25 | M&L Pre-cast Reinforced Cement Concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate) as in Cover Slab of Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed.NOTE : Reinforcement shall be measured and paid separately under relevant Item. |
| 26 | M&LPCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in copingand benching including throatingand use and waste of form work complete all as specified and directed. |
| 27 | M&LPCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation, mass concrete complete all as specified and directed. |
| 28 | M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and bindingwith and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed. |
| 29 | Mild Steel TMT bars 8mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 30 | M&L Preparing new Steel or Iron Surfaces of any description,exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed. |
| 31 | M&L Preparing new Steel or Iron Surfaces of any description, n exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed. |
| 32 | M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paintover a coat of primerby filling the cracks with putty and make smooth surface by smart painting method complete all as specified and directed. |
| 33 | M&L Preparing new Steel or Iron Surfaces of any description,exe 10 Cm width or girth and applying One Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed. |
| 34 | M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 35 | M&L Preparing new Steel or Iron Surfaces of any description, n exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed. |
| 36 | M&L Preparing old Steel Surfaces of any description not otherwise decribed nexc 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 37 | M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 38 | M&L 100 mm thick,Cement concrete, type D-2, (1:4:8), 40 mm graded aggregate as in sub base even and rough Finishing surfaces of concrete topping even and fair (without using extra cement), and finishing surfaces of concrete in sub-floors, sub-bases, etc. even and rough to receive the topping layer complete all as speci-fied and as directed. |
| 39 | S&F 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed. |
| 40 | M&L for 100 mm thick PCC 1:2:4 type B2 using (40 mm graded aggregate) as in hardstanding and pavings including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specifed and as directed. |
| 41 | M&L for Vitrified parkingtiles of any colour/patern 40cm x 40 cm x 7 to 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes complete all as specifed and as directed. |
| 42 | S&FLouvers /Precast RCC Jalli, 35mm thick (measured solid) including all mouldingin PCC 1:2:4 type B0 (using 12.5 graded aggregate) set in cement mortar 1:4 complete all as specifed and as directed. |
| 43 | NOTES:1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2.The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule \"A\" notes for details. |
