|
| 1 | Excavation in post holes (or similar holes) each not exceeding0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 2 | Material and Labour for Plain Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and directed. |
| 3 | Supply and fixfor posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and directed. |
| 4 | Supply and fixing PVC coated chain link fencing, MS galvanised of size 50mmx50mm, 3mm dia fixed to any type of standards, rails straining bolts including fixing of binding wireall as specified and as directed. |
| 5 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the otherends with washers 12mm diaand , n exc 5cm long ) complete all as specified and as directed. |
| 6 | Material and labour for Mild steel round bars, 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 7 | Material and labour forpreparation of newor previously untreated steel surface over 10 cm width orany type of girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 8 | Excavation in trenches exc 1.5 M wide and n. exc 1.5 M depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 3 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 9 | Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed. |
| 10 | Removing excavated soil to a distanceexceeding 500 metre but not exceeding 1500 maway and depositing where as directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed. |
| 11 | Material and Labour for providing precast cement concrete type C1, 1:3:6 (20 mm graded stone aggregate) solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 12 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:4, finished even and fair without using extra cement.WPC @ 2% by weight to be mixed complete all as specified and directed. |
| 13 | M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint with one coat of white cement primer on new surfaces.Complete all as specified and directed.Note(tint of paint shall be decided by GE) |
| 14 | Materialand Labour forplain cement concrete 1:2:4 type B1 using 20mm graded granite stone aggrgate as in fixing of angle post for fencing on wall including necessary forwork complete as specified and as directed. |
| 15 | Material and Labour for posts, struts posts, purlins etc including cutting tops to shape as directed, drilling holes, including all necessary welding, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 16 | Supply and fix in Galvanized, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including secruing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured) |
| 17 | Supply and fixing 900 mm dia punched tap concertina coil (effective dia 890 mm at stretch length of coil 8.00 mtr) with two handle and spike at both end of coil dovetail clips (18 SWG) including razor wire 07 nos 6.00 mtr length of each bundle of coil wire medium size barbed length 20 mm width 14 mm including 51 pin128 nos clips, in each coil including 230 gm/sqm zinc cozting on core wire coplete all as specified |
| 18 | Material and labour for TMT (CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 19 | Material and labour for Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregateas in cover slabs of man holes including necessary form work, placed in position, set in CM 1:4 complete all specified and as directed. |
| 20 | Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed. |
| 21 | Material and labour for Plain cement concrete 1:3:6, type C1, using 20mmgraded stone aggregate as in copings, kneelers, apex stones,bed plates, kerbs, bed block for hold fastincluding necessary form work all as specified and as directed. |
| 22 | Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in hard/dense soil getting out complete all as specified and as directed. |
| 23 | Material and labour for reinforced cement concrete design mix M-25 or 1:1.5:3 using 20 mm graded granite stone aggregate in foundaions including rafts, footings, foundaion beams, plinth beams, bases for columns etc, basement slabs, underreamed piles and mass concrete all as specified and as directed. Note : Reinforcement and form workshall be measured and paid separately. |
| 24 | Material and labour for TMT bars(CRS/HCR), 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 25 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete all as specified and as directed. |
| 26 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding25 cm complete all as specified and as directed. |
| 27 | Supply and Fix of 20mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the otherends with washers , the other end enlarged andjagged or lewised exc 30 cm long complete all as specified and as directed. |
| 28 | Supply and fix structural steel work in tubular trusses and tubular posts inlcuding purlins, rafters, special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade st 240 and painting with one coat of zinc chromate primer paint including preparation of surfaces complete all as specified and directed |
| 29 | Supply and fix mild plate(plain or chequerred), channel, square cut or notched(ordinary or counter sunk) forming holes with riveted, bolted or welded attachment to bottom of pipe conforming to Fe 410-W quality A(Gde-E-250) complete all as specified and directed. |
| 30 | Supply and fixing Pre- painted galvalume aluminum zinc coated corrugated sheetof 0.50mm thickness having tensile strength of 550 Mpa with coating thickness fixed with GI self taping screws as in roof covering/cladding to wall, ridges, valley guttersfixed to frame work all as per manufacturers instructions all as specified and as directed. |
| 31 | Supply and fix PVC(SWR) half pipes trapezoidal shape rain water gutter 150mm at top and 110mm at bottom width complete all as specified and as directed. |
| 32 | Supply and fix PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches/floor of diameter 110mm complete all as specified and as directed. |
| 33 | Supply and fix mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 34 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting outin soft/loose soil complete all as specified and as directed. |
| 35 | Material and labour for hard core with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed. |
| 36 | Material and labour for 100mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregateas in sub base of floors including necessary form work all as specified and as directed. |
| 37 | Material and labour formachine pressed precast concrete interlocking paver block, any shape and size of 80 mm thickness M-40 grade conforming to IS 15658-2006 with grey cement and pigment laid over and including 50mm thick cushion of dry river sand, compacted with mechanical surface vibrator complete all as specified and directed. |
| 38 | Supply and fix framed work such as grills , grating ,etc with ends of bars shouldered and or revated for forged in to spike, framed guardbars barred iron doors, ladders, balusters, walk ways raling framed work for water tanks similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 39 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water, removing rubbish/debris etc complete all as specified and as directed. |
| 40 | Material and labour for rendering 10mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth,without using extra cement complete all as specified and directed. |
| 41 | Material and Labour for preparing newly plastered surfaces of wall and applying two coat of white wash over a coat of chalk whitening complete all as specified and as directed. |
| 42 | Supply and fix Welded steel wire fabric Weight exceeding 3.5kg but not exceeding 4 Kg per square metre with dia of wire not less than 3.8mm , fixed towood or steel members complete all as specified and as directed. |
