|
| 1 | M&L for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coatwith paving bitumen grade 10 pack primer (VG-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (VG-30) @9.8 kg per 10 sqm blinded with 0.09 Cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed. |
| 2 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 sqm, depth exceeding 50mm and not exceeding 100mm and segregation materials stacking for reuse and remove from the site of workcomplete all as specified and as directed. |
| 3 | M&L 7.5 cm thick (Compacted thickness) WBM with Granite, trap or Basalt, coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using 8-12 tonne power road roller, complete all as specified and directed. |
| 4 | M&L for preparing unsurfaced / new water bound macadam(WBM) surfaces by brushing with Wire Brushes for removing Caked, Mud, etc., Sweeping with Brooms and finally Fanning the Cleaned Surface with Gunny Bags to remove all loose dirts, etc. and applying evenly a priming/tack coat withbituminous primer of grade 10 Pack (VG-10) @ 10kg per 10 sqm over WBM surfaces, complete all as specified and directed. |
| 5 | M&L for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweepijng with brooms and finally fanning the cleaned surface with gunny bags / by mechanical means to remove allloose dirt etc., complete all as specified and as directed. |
| 6 | M&L for applying evenly a priming / tack coat with bitumen primer using paving bitumen of grade 10 Pack (VG-10) @ 5 Kg per 10 sqm, complete all as specified and as directed. |
| 7 | M&L for premix bituminous macadam using paving bitumen of grade 30 Pack (VG-30) @ 4% by weight of total mixlaid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed. |
| 8 | M&L for 40 mm thick consolidated thickness bituminous premixed carpetwith 0.54 Cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqmof binder using paving bitumen grade 30 Pack (VG-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed. |
| 9 | M&L for liquid seal coat by applying paving bitumen of grade 30 (VG-30)@ 9.8 kg per 10 Sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 Sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed. |
| 10 | M&L for preparing bituminous surfaces of road and marking 2mm to 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10 cm wide on road pavements with hot applied thermoplastic road marking paintof approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers\" instructions complete all as specified and directed. |
| 11 | Supply and fixing of cat eye solar reflective type of aluminumbody alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25 mm (shank 65mm) of high effciencywith Mono rystafle solar panel 2.4V/0.3watt one NI-ed rechargeable battry (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 med. (Modle DA 972.0) fixed with and incl MS stud of suitable size as per manufactures instructions and all as specified and directed. |
| 12 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. |
