Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface execvation n exc30 cm deep and everaging 15 cm deep and getting out in soft and loose soil complete all as specified and directed . |
| 2 | M&L for Sand filling (crushed sand) under floors or in foundations including watering and consolidation complete all as specified and directed . |
| 3 | M&L for 75mm thick Cement concrete type E-2, 1:4:8 (Using 40mm graded aggregate) as in fdn and subbase to received top layer complete all as specified and directed . |
| 4 | M&L for 100mm thick hard core of gauge n exc 63mm broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm watered nand rammed to a true surface as in sub base all as specified and directed. |
| 5 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; ccomplete all as specified and directed . |
| 6 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 7 | Removing excavated material to a distance exc 250m but not exc 500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed . |
| 8 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, shed curved shape fixed with self tapping screws as specified. |
| 9 | S&F mild steel rolled work as in roof trusses, (framed),trussed,purlin,crane gantries,rails and heavy bracket framing (Beam,angle,channel or flat section, curved shape where reqd) including distance pieces,cleats etc,confirming to gradeFe 410 -W (GdeE- 250) quality-A, complete all as specified and directed. |
| 10 | S&F Mild steel screw bolts shank dia 12 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Fe-410- W(Gde-E-250) quality-B complete all as specified and directed. |
| 11 | M&L preparation for two coat of synthetic enamel painting on new steel surfaces over 10cms width or girthover a coat of red oxide primer etc all as specified and directed. |
| 12 | Excavation in post holes n.exc 0.5 cum each getting out,returning filling in and ramming earth in layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 13 | M & L for cement concrete 1:2:4 type B2 (40mm graded aggregate)in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) |
| 14 | S& F Solid PVC Wall Lining Panellingconsisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for exposed 8mm thick metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 17 | S & F for anodised aluminium snap grid frame work size of grid 605 x 605mm for false ceiling all as specified and directed. |
| 18 | S&F for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs (size of grid 605 x 605mm) by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified as per directions of the Engineer-in Charge. |
| 19 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil complete all as specified and directed . |
| 20 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed . |
| 21 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete complete all as specified and directed . |
| 22 | M&L Brick work with burnt clay bricks(old size) in cement mortar 1:6 , with subclass \"B\" bricks, straight or curved in plan exceeding 6 m mean radius complete all as specified and directed . |
| 23 | M&L Brick work with burnt clay bricks sub class ‘B’ brick straight or curved on plain to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed . |
| 24 | M&L Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed . |
| 25 | M&L Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m |
| 26 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in CM 1:4 complete all as directed. |
| 27 | M&L for glazed ceramic coloured tiles (350x250x7mm/450x350x7mm ) thick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:3 rough to receive tiles complete all as specified and directed by engr in charge. |
| 28 | M&L for RCC nominal mix 1:1.5:3 typeA1 using 20mm graded stone agg as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete. |
| 29 | M&L for RCC nominal mix 1:1.5:3 type A1 using 20mm graded stone agg as in beams, cantilevers, bressummers, lintels over 1.5m span. |
| 30 | M&L forRCC nominal mix 1:1.5:3 type A1 using 20mm graded stone agg as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like etc all as specified and directed. |
| 31 | M&L Formwork to sides ofrough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces of concrete etc all as specified and directed. |
| 32 | M&L Formwork to sides and soffits of rough finish surfaces of concretefloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc all as specified and directed. |
| 33 | M&L Formwork to soffits ofrough finish surfaces of concrete suspended slabs such as roof slabs, floor slabs, landing and similsr works; not exc. 200 mm thik etc all as specified and directed. |
| 34 | M&L MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement.complete all as specified and as directed. |
| 35 | Ditto but 5 mm dia and over upto and incl 10 mm dia in stirrus, spaces, and binders.complete all as specified and as directed. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantt and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 37 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately complete all as specified and directed.. |
| 38 | S&F 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed . |
| 39 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.complete all as specified and as directed. |
| 40 | S&F 100 mm long ,Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.complete all as specified and as directed. |
| 41 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised. complete all as specified and as directed. |
| 42 | Supply, hoisting and fixing of rotational moulded polyethylene water storage tanks 1000 litres capacitytriple layer(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl connecting the overflow drain out, inlet and out pipes, tank nipple, elbow, bend, unions, sockets etc complete all as specified and as directed. |
| 43 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed . |
| 44 | S&F in repair 20mm bore stop valve cast copper alloy with handle screwed both ends for CPVC out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engineer in Charge. |
| 45 | S&F vitreous china wash down Single Peice Water closet pan (EWC) white rimless including soft close seat cover, connection pipe to union, inlet and overflow pipes, anti-syphonage pipe with PVC flush pipe of 32mm diawith mild steel chromoum plated hinging and \"P\" or \"S\" trap device complete all as specified . |
| 46 | S&F Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 47 | S&F Chromium platedtoilet paper holderincluding fixing arrangement complete all as specified and directed . |
| 48 | S&F Chromium platedsoap dishincluding fixing arrangement complete all as specified and directed . |
| 49 | M&L CI Floor trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all asspecified and directed . |
| 50 | M&L CI Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all asspecified and directed . |
| 51 | M&L Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified by Engr-in-charge |
| 52 | S&F 15mm bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 53 | S&FBrass Chromium plated mixer for mixing hot & cold water screwed down for 15mm bore cpvc pipecomplete all as specified and directed . |
| 54 | S&F 15mm bore stop valve concealed type cast copper alloy with handle screwed both ends for cpvc out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed |
| 55 | S&F15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge. |
| 56 | S&F Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified |
| 57 | S&F PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed . |
| 58 | S & Fbrass chromium plated overhead shower 200mm size( squar/rectangular) with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed . |
| 59 | S&F brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screwsincluding wooden/plastic beads complete all as specified and directed by Engineer in Charge. |
| 60 | S&FVitreous china boul urinal flat back, size of 465x355x265mm white( minimum), with grating and union for discharge pipe, complete inclproviding and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe complete all as specified and directed . |
| 61 | S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed . |
| 62 | M&L for Hardcore of broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed . |
| 63 | M&L 40 mm thick, Cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate)as in floors finished even and smooth using extra cement.complete all as specified and directed. |
| 64 | M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on externalwalls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 65 | M&L for 10mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on externalwalls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 66 | M&L for preparation of newly plastered surfaces of wallsand applying two coat of oil bound distemper over and inclda coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. |
| 67 | M&L Preparation of newly plastered surfaces and applying two coats of cement base paint on walls over and incld a coat of alkali resistant primer complete all as specified and directed . |
| 68 | S&FUrinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)complete all as specified & directed. |
| 69 | Supply &fixed Vitreous china urinal partition white of size 310x700 mm Urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed. |
| 70 | S&F Two way Bib cock, fancy type chromium platedcast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified. |
| 71 | Demolition/cutting of brick work built in cement /lime mortor in any position / situation in walls/parapets complete all as specified and directed. |
| 72 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) weight not less than 0.55 kg/m, work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 73 | S&F PLASTER OF PARIS CEILING Seamless calcium silicate ceiling 8mm thick made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed . |
| 74 | S&F 4 mm thick figured/frosted glass/ pin head type and glazingin squares not exc 0.5 Sqn in each pane incld fixing with powder coated aluminium bidding and rubber gasket complete all as specified and directed. |
| 75 | S&F Stainless Steel Shower Panel 6 in One With LED Display, Tower System, Rainfall Shower, Body Massage Spray, Handheld Shower, Temperature fixed to 15mm pipe, complete all as specified and directed. Make:- Jaquar (Cat no Jpl-Ssf-St8896)/Ruhe (Cat no SKU: 14-0507-01)/Kohler (Equivalent) |
| 76 | S&F automatic Sensor Flush System Ceramic Urinal Toilet For Men Wall Hung Urinal Pot Smart-urinal-1 Standard Commode Urinalincld electric as well as battery system complete all as specified & directed.Make:- Jaquar (Cat no URS-WHT-13265)/Kohler (Cat no K-26475IN-ER-0)/Ruhe (Equivalent) |
| 77 | Supplying and laying of 20 mmexternal dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all plain fittings in trenches/ walls including dismantling old GI pipes including complete all as specified and directed. |
| 78 | Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass and plain fittings including dismantling old GI pipes complete all as specified and directed. |
| 79 | M&L for Non skid high strength digital floor tiles coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 1.00 Sqm but not exceeding 3 Sqm, in floors etc set and joined in neat cement slurry and pointed in epoxy to match colour tiles including 15 mm thick screed bed in CM 1:4complete all as specified & directed. |
| 80 | M&L for glazed ceramic coloured tiles (600x1200) 7 to 8 mm thick on vertical surfaces such as skirting and dado set and joint in chemical as per manufacturer instruction and pointed in epoxy to match including 10mm thick plastering in C:M 1:3 rough to receive tiles complete all as specified and directed . |
| 81 | S&F in repair Series under mount WASH Basin (White) | Rectangl oroval Ceramic Basin/Sink for Bathroom, Living Room incld coupling excluding taps, waste pipe chain and plug and porcelain but including brackets, waste coupling complete all as specified and directed. Make:- Jaquar(Cat n0 CNS-WHT-705)/Kohler(Cat no K-2211IN-0)/Ruhe (cat n0 18-0508-01) |
| 82 | S&FLED Rectangular Shape Bathroom Mirror 900x1200 mm and fixed to wall with chromium plated brass screws and cup washers complete all as specified and directed . |
| 83 | S&F in repairs15 mm bore Angle Valve with Wall Flange Angle Cock Faucet(Wall Mount Installation Type) complete all as specified & directed.Make:- Jaquar/Kohler/Ruhe |
| 84 | S&F in repairs Wall-Hung Rimless P-Trap Tornado Western Toilet / Commode (White) fixed to wall complete all as specified & directed.Make:- Jaquar(Cat no KU -WHT-35953BIUFSMPM)/Kohler(Cat no SKU: 29150IN-0)/Ruhe(Cat no B0D54B6XWK) |
| 85 | S&F Wash Basin Vanity High Quality pre laminated Hdhmr Engineered Wood Wash Basin CabinetUnder Counter Basin size 900x600x600 incld all necessary fittings like auto close hinges, ss handles, sliding channels etc complete all as specified & directed.Make:- Jaquar/Kohler/Ruhe |
| 86 | S&F 18mm Italian White Granite Slab, For Flooring or counter top set and joined in neat cement slurry and pointed in epoxy to match colour tiles including 15 mm thick screed bed in CM 1:4complete all as specified & directed. |
| 87 | S&F Table Mounted Regular SENSOR Basin Tap (Cold Only), Chrome | Battery as well as electric Operated, Cold Water Inlet | Faucet for Home or Commercial complete all as specified & directed.Make:- Jaquar(Cat no SNR-SSF-51011N)/Kohler (Cat no 18656IN-ND-CP) /Ruhe(Cat no 19-0101-01) |
| 88 | S&F Health Faucet 1.00 m Easy Flex Tube and Hooks, Polished, Plastic, Chrome Finish complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 89 | S&F Stainless Steel Connection Pipe, 18 Inch long complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 90 | S&F Lining Grating with hole and without hole Locking Plain | Flat Round Grating Jali | SS 304 Stainless Steel Grate for Bathroom/Kitchen Floor Drainer 5\" refixing frame type complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 91 | S&F ARC Bottle Trap (12 inches) complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 92 | S&F Space Aluminium Toilet Paper Holder with Mobile Stand/Tissue Roll Holder with Mobile Stand/Bathroom Accessories complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 93 | S&F Metal Crome Towel Ring 150 mm dia with Round Flange (Medium) complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 94 | S&F Stainless Steel Gde 304 Towel Rail,600 Mm,Standard Size complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 95 | S&FStainless Steel 304 Grade Folding Towel Rack 600 mmfor Bathroom complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 96 | S&F Corner Glass Shelf (with Bracket) Standard Size complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 97 | S&F Brass chrome finish Soap Dish Holder complete all as specified & directed. Make:- Jaquar/Kohler/Ruhe |
| 98 | Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing complete all as specified and directed. |
| 99 | S&F 12 mm toughend frosted glass for bathroom partition incld all fittings and fixtures such as SS handle 300 to 450 mm , 25-30 mm dia , lock,hinges, spring door etc incld cutting to shape , drilling as reqrd incldtaking down comlete all as spd and directed. |
| 100 | S&F 100mm long SSbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed. |
| 101 | S&F 150mm long SS anodised tower bolt complete all as specified and directed. |
| 102 | S & Fmortise lock 100mm long ,4 lever,brass complete all as specified & directed. Note: The rates include for escutcheon plates and two keys complete Make:Godrej or equivalent |
| 103 | Supplying and fixing of CPVC ball valve/ stop valve 25mm outer diaall as specified and directed. |
| 104 | Filling under floor, spreading and levelling in layers n exc 25cm thick well raming including watering as requred complete all as specified and directed complete all as specified and directed. |
| 105 | Use and waste for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed. |
| 106 | M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 107 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed . |
| 108 | M&L for PCC 1:3:6 type C-2 (40 mm graded agg) as in surface channel/drain / haunching of manhole etc. complete all as specified and as directed. |
| 109 | M&L for Ready Mix plaster 5mm thick on concrete surface of ceiling finished even and fair surface without using extra cement complete all as specified and as directed. |
| 110 | M&L for applying layer of 1mm thick white wall care putty forfinishing the surface even to true aligned surface of wall/ceiling and smooth using sand papers etc all as specified and directed by Engineer-in-chargeMake : Birla white/JKwhite/Altek |
| 111 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 112 | M&L forapplying two coats of oil bound distemperon prepared surfacesand incld a coat of alkali primer (approved quality & tint) using machine sprayon ceiling all as specified and directed. |
| 113 | M&L for water proofing treatment to roof surface with APPwater proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish& reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat ofbitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing as per manufacturer\"s instructions incl 2coat of aluminium paint over complete treated surface complete all as spd and directed.Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer.3. The APP Membrane to be inserted in the parapet wall/wallby cutting chases of atleast 65X50mm size & making good in CM 1:3. complete all as specified and directed. |
| 114 | M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface on wall/roof surface including using WPC as per manufacturer instructioncomplete all as specified and directed. |
| 115 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating complete all as specified and directed. |
| 116 | M&L for 100mm thick SFRC manhole/drain cover size not exc 1.00sqm each set and jonted in cement mortar 1:4 complete all as specified and directed. |
| 117 | S&F 20mm float ball valve high pressure of PTMT with epoxy coted aluminium rod & high density plastic bal serewed for ison pipe complete all as specified. |
| 118 | S&FBrass CP basinmixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed. |
| 119 | S&F for 600mmx900mm bevelled edge looking mirror of selected quality glass, frame less , mounted with chromium plated brass screws and cup washers complete all as specified and directed. |
| 120 | Supply and fix for chromium plated towel ring 200 mm dia all as directed. |
| 121 | M&L for 110mm out let dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 122 | S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall or laid in trenches complete all as specified and directed. |
| 123 | S&F in 75mm bore PVC (SWR) bends any radius all as specified and directed. |
| 124 | S&F in 75mm bore PVC (SWR) bends with acess door any radius all as specified and directed |
| 125 | M&L for 110mm bore PVC (SWR) pipe conforming to relevant IS single socketed in any length with rubber ring joint and fixed to wall complete incl taking down old rain water pipes complete all as specified and directed. |
| 126 | S&F 110mm bore PVC (SWR) bends any radius all as specified and directed complete all as specified and directed. |
| 127 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door any radius all as specified and direction complete all as specified and directed. |
| 128 | S&F 110mm bore PVC (SWR) vent cpwl any radius all as specified and direction complete all as specified and directed. |
| 129 | M&L for 150mm nominal size Double wall corrugated HDPE pipes stiffness class SN 8 high density,polyethylene pipe resistent to chemicals,easy and light weighted,long living,low friction,flexible,sun resistant pipe and laid in trenches complete all as specified and directed. |
| 130 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed. |
| 131 | Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box concealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulators etc , all as specified and directed for the followings:- Note: ceiling Light/ Fan points wirings are to be drawn in existing in situ conduits all as directed. |
| 132 | (a)One light/fan/bell point controlled by one way switch 5 amps. |
| 133 | (b)One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 134 | (c)One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 135 | All as per above item No 2. but with cable 2.5 Sqmm size 1100 volts grade for One 3 Pin socket 15A Independent board complete all as specified and directed . |
| 136 | Supply and fix switch modular type single pole one way 6 Amps all specified and as directed. |
| 137 | Supply and fix modular switch 16 Amps one module single pole one way complete all as specified and directed . |
| 138 | Supply and fix modular socket 3 pin multi purpose 6 Amps flush type complete all as specified and directed . |
| 139 | Supply and fix modular socketmulti purpose 2-in-1, 6 pin 6/16 Amps 2 module complete all as specified and directed . |
| 140 | Supply and fix switch modular type single pole bell push 6 Amps complete all as specified and directed . |
| 141 | S&F bell ding dong AC,230 volts,single pole complete all as specified and directed . |
| 142 | S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed. |
| 143 | Supply, laying and drawing submain wiringin and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed. |
| 144 | Taking down & refixing of ceiling fan after greasing, oiling, change of bearings & rewinding of ceiling fans and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 145 | Supply & fixing of ceiling fans complete with blades, down rod, electronic regulator and accessories, 230 volt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 146 | S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for aboveDB all as specified and directed.NOTE (a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 147 | S&Fof factory made epoxy polyester powder coated distribution board VTPN MCCB DB 4 way with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet andfixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with 4 pole MCCB as incommerand 12 SP MCBs outgoings complete all as specified and directed including taking down old DBs. NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 148 | S&F in ofMCCB 100 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed. |
| 149 | S&F of single pole MCB 6 to 32/40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB\"s complete all as specified and directed. |
| 150 | S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. |
| 151 | Supply and fixing LED lights fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down of existing/old tube light fitting complete all as specified and directed. |
| 152 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 153 | Taking down exhaust fan of any material body & of any sweep and deposit to MES store yard complete all as specified and directed. |
| 154 | Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 300 mm with making opening of required size & shape complete all as directed and specified. |
| 155 | Supply and fix exhaust fan steel body AC single phase 230 Volts of size 300 mm sweep with blades and frame and louvers with making opening on the wall/surface in round/square shape as per site requirement complete all as directed and specified. |
| 156 | Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 157 | S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 158 | S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 159 | S&Fof single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB\"s complete all as specified and directed. |
| 160 | M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. |
| 161 | S&F of switch piano type 5 amps single pole one way complete all as specified and directed. |
| 162 | S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed. |
| 163 | S&F of switch pianotype 15 amps single pole one way complete all as specified and directed. |
| 164 | S&Fof socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed. |
| 165 | S&Fof factory made epoxy polyester powder coated distribution board SP & N 4 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 2 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for aboveDB all as specified and directed.NOTE (a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 166 | Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link completeall as directed by Engineer -in- Charge. |
| 167 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level ≥ 100 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. |
| 168 | Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 50,000 burning hours at L70 criteria,Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. |
| 169 | Supply and Fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover.System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70.The color temperature is around 6500 K with a color rendering index of 70.The luminaire is IP:66 protected with IK05 impact resistance.It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed. |
| 170 | Supply and fixing Ventilating Fan250 mm sweep, 1250 RPM, non metallic resin body,single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmmincluding writing MES NO. 2 CM height with synthetic enamelled black paintcompleteall as specified and as directed. |
| 171 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 172 | Supply,laying in repairs of PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm 3.5 core laying in trenches, fixed along wall, through GI pipe under floor complete all as specified and directed . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
