|
| 1 | Taking down unserviceable LED street/security/Building security/flood light fittings of any type / wattage / make etc fitted on LT poles, High Mast light poles, building etc for replacement with new one complete all as specified and directed.Notes - (i). Cost of taking down carefully from existing position after disconnecting electric connections, sealing cable ends, bringing to MES store yard, is deemed to be included in this item quoted rates.(iv)Contractor shall be responsible for all necessary required Tools, Plant & vehicle for replacement of security lights in the stationwithout any any extra cost. |
| 2 | Supply and fixing in replacemnt of sheet moulding compound junction box shock and rust proof, termite resistant, tamper proof , front openable typefor single phase, two wirerating of size 250x200x105mm complete with one no. MCB SP 6 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole / wall complete. Make - Sintex/ Hensel/ABB / Power System & Controls. |
| 3 | Supply and fix in replacement single phase of 5KW of automatic street light switch using Infrared Sensor based NATURAL SWITCH for automatic switching of street lights. nature switch operation should be based on Natural Light Lux level, required illumiance level for switching ON is ≤ 30 Lux and for switching off ≥ 10 Lux. The sensor should have part night operation facility of min 4 hrs to max 12 hrs. The sensor along with suitable power contractor of 20 to 25 Amps current rating.incomming MCB and outgoing MCBs of 20-25 Amps and auto- manual (sensor By pass), size of circuit should be multistranded FRLS min size of 10 Sqmm, selection operation should be enclosed in a pole/wall mounted enclosure made of rust proof, electric shock proof termite proof and FR grade special mounting compound (Sintex made SMC junction box) conforming to IP 54. complete all as specified |
| 4 | Supply & fixing in replacemet multifunctional digital timer swith with inbuilt function for switching on/ off street lights according to the rising / setting of the sun with combination function according to astronomical time and / or fixed preset times complete with all connection to existing panel as per directed & complete testing .Make :- Legrand as per Cat Part No 4126 54 or equivalent L&T / C&S / Havells |
| 5 | Supply & fixing Automatic Security light control panel having sheet steel enclosure power coated CRCA sheet suitable for three phase,6 KW rating, outdoor installation,floor mounted, IP 54 protected including making all connectionsand grouted in PCC of type B-1 (1:2:4) with foundation should be 100mm above ground level complete with comprising of the following switch gears:-(i) MCB TPN 40Amp rating -01No (ii) Multifunctional Digital Timer Switch - 01 Nos(iii) Contactor with nominal current rating 32Amp TP (iv) Outgoing MCB SP with Suitable rating - 03 Nos (v) Auto/manual switch(vi) Incoming and outgoing terminal suitable for three phase supply. |
| 6 | M&L for scraping, scretching, cleaning the old paint, preparation of the surface for repainting.Painting LT 9 Mtr long PCC pole in Black & White strip 30 Cm a part alternaterly up to 1.5Mtr height from ground level with synthetic enmel paint, writing pole Nos. & applying one coat of snowcem on PCC muff & remaining portion of the poleall as directed by Engr-In-Charge. |
| 7 | M&L for street light bracket made out of 40mm dia medium grade GI pipe of 1.2m length bent to required shape suitable for fixing street light / security light fitting on Steel tubular pole/ RCC pole / including two Nos of clamps, nuts & bolts etc and two coats of aluminium paint over a coating of red oxide primer and Taking down of existing unserviceable rusted street light brackets with clamps, nuts and bolts etc, complete all as directed. |
| 8 | M&L for Building security light bracket made out of 32mm dia medium grade GI pipe of 45 cm length bent to required shape suitable for fixing building security light fitting on wall including two Nos of clamps, nuts & bolts etc and two coats of aluminium paint over a coating of red oxide primer and Taking down of existing unserviceable rusted brackets with clamps, nuts and bolts etc, complete all as directed. |
| 9 | Supply and fixing in replacement ofsteel tubular swaged poleswith cast iron base plate, finial taper plug, bolts, nuts & washers made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including marking pole No on pole including painting of poles with one coat of red oxide primer and two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) over exposed surface and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and directed by Engr in Charge. Note : Earth work and PCC in foundation shall be measured separately. |
| 10 | Supply and fix in replacement steel tubular swan nacked pole with cast iron base plate, finial taper plug, bolts, nuts & washers made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including marking pole No on pole including painting of poles with one coat of red oxide primer and two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) over exposed surface and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and directed by Engr in Charge. Note : Earth work and PCC in foundation shall be measured separately. |
| 11 | M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation of PCC poles/struts as specified including necessary form work. |
| 12 | M & L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation of stay assembly etc including necessary form work , all as specified and directed. |
| 13 | M & L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for copping around poles, including necessary form work finishing even and smooth without using extra cement, all as specified and directed. |
| 14 | Supplying, laying or fixing or passing through pipe, testing and commissioningXLPE insulated,steel tape / wire armoured heavy duty electric underground cable, 1100 volts grade with stranded aluminium conductor of following nominal cross sectional area of item no 15-17 :- |
| 15 | (a) 10 sqmm 4 core. |
| 16 | (b) 16 sqmm 4 core |
| 17 | (c) 25 sqmm 4 core |
| 18 | Excavation in trenches for laying under ground cable, any type of soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed by Engr–in–charge. |
| 19 | Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 3 m in depth and getting out complete. |
| 20 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge. |
| 21 | Removing surplus excavated material to a distance not exceeding 50meter above the starting point complete all as specified and directed by Engr in charge. |
| 22 | M&L for HDPE Double Wall Corrugated pipe of size 40mm outer dia and 32mm inner dia confirming to IS:14930 Part-IIincluding necessary pipe fittings such as couplers, end caps, bend etc. laid in trenches/ fixed to wall with suitable clamps for cable protection complete all as specified and directed. |
| 23 | Supply & fixing Weather proof flat twin corecopper conductor cableof size 1.5 Sqmm, 1100 volts gradeincluding dismantling existing unserviceable cableany description and complete all as specified and directed. Make : Havells/Plaza/Finolex/Polycab |
| 24 | Supply and fixing in replacement of LED Building security light fitting 45 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. Make : Havells/ Syska/PHILIPS/ Bajaj/ Crompton. |
| 25 | Supply and fixing in replacement of LED street light fitting 70 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. |
| 26 | Supply and fixing in replacement of LED street light fitting 90 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. |
| 27 | Supply and fixing in replacement of LED street light fitting 120 watt 230v AC Outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. |
| 28 | Supply and fixing in replacement of LED flood light 100 watt 230v AC Outdoor type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete with driver and lamp complete all as directed at site. |
| 29 | Supply and fixing in replacement of LED flood light 200 watt 230v AC Outdoor type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete with driver and lamp complete all as directed at site. |
| 30 | Supply and fixing in replacement of Post top lantern LED type 30W 230VAC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp complete. |
| 31 | Supply and Fixing in replacement MCB single pole 6 Amp-32 Ampfor street light junction box / panelincluding connection complete all as directed . Make: Havells/L&T/ Legrand /ABB |
| 32 | Supplying and fixing in renewal MCB single pole 230 volts 50 Hz AC of rating40 to 63 Amp including connectioncomplete all as directed. Make: Legrand/Havells/ABB/ L&T |
| 33 | Supply & Fixing Power Contactor 63 - 80 Amp rating 4 pole including all connected accessories with suitable rating like coil / auxiliary Contact etc) as per site requirement and suitable for street light controll panel complete with all connection as directedMake: L&T /Schneider / Legrand /C&S / BCH |
| 34 | Supply & Fixing Power Contactor 25 to 40 Amp rating single pole including all connected accessories with suitable rating like coil / auxiliary Contact etc) as per site requirement and suitable for street light controll panel complete with all connection as directedMake: L&Tor equivalent of Schneider / Legrand /C&S / BCH |
| 35 | S&F of Aviation obstruction light luminaries fittings having integral LED aviation light comprising of aluminium housing with polycarbonate enclosure at the top of the pole and making necessary electric connection and fixing arrangement of aviation light Cat Part No BGAV 302 LED or eqvt |
| 36 | S&F in replacement LED Bollard Cylindrical shaped cast aluminium with opaque threaded polycarbonate diffuser for optimum ingress protection IP 65, 12 watt with integrated driver and all necessary work complete all as specified and directed |
| 37 | Supply and fixing in replacement LED bollard with Mushroom shaped 09 Watt, with bulb holder, suitable for LED bulb with cast aluminum housing and polymer diffuser for pleasant light output, IP 65 protection complete all as directed at site. |
| 38 | M&L for rewinding of electric motor upto 2.5 HP capacity with super enamel copperwire of existing gauge including insulation and varnishing, including repair to gear boax after dismantling all electrical and mechanical connection from High Mast light, testing and commissioning at site complete all as specified and as directed. |
| 39 | M&L for replacemet of high mast wire rope of existing size complete all as specified and as directed. |
| 40 | Supply & fix of MCB TPN40 to 100 Amps,\" C\" series , bracking cap 10KA, 415V complete including taking down old MCBsall as specified and directed. |
