|
| 1 | Taking down chowkats or frames including shutters (without taking off shutters from the frames)exceeding 1.50 Sqm and not exceeding 4 Sqm each,complete all as specified and directed. |
| 2 | Taking down chowkats or frames including shutters (without taking off shutters from the frames)not exceeding 1.50 Sqm complete all as specified and directed. |
| 3 | Demolition of stone slab,floor hearth or wall tilinglaid bedded and pointed in any mortar (but not backing) complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise specifically provided etc (below or above ground level)as in floors etc and removing debris off the site complete all as specified and as directed. |
| 5 | Dismantling MS steel work of any descrption as in railing,Gate, grill etc complete all as specified and as directed |
| 6 | Taking down wall panelling/partitions and similar works |
| 7 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 8 | M&L for UPVC fixed ventilators of approved colour with glazing all as per manufactures direction and following sections:-(1) UPVC ventilator frameshall be made of UPVC material confirming to IS-10151 .The ventilator frame shall be nade of extruded UPVC section having overall dimension of 60mm x60mm having wall thickness 2 mm +/- 0.1mm.Corners of wall frame shall be jointed by MS galvanised brackets joints mitred and plastic welded.The hinge side vertical outer frame shall be reifnforced with galvanised MS tube of wall thickness 1mm +/- 0,1mm and the tie rod shall be provided at the bottom of the frame .Provision for exhaust fan shall be catered in the frame.(2) Glazing shall be provide with 5mm thick frosted glass fixed with appropriate size beading as per manufactures specification.Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. |
| 9 | Material and labour for UPVC door with shutters .The construction profile shall be overall frame sectional size 60x 58mm with wall thickness 2.70+/- 0.2mm extruded sections.The corners shall be plastic welded.The hinge side vertical outer frame shall be reiforced with galvanised steel profileof wall using 8mm dia 80mm long MS screws minimum 3 Nos on each side.The glazing shall be fixed to door frame with UPVC standared beading s of sectional size 24.05x16mm & 2mm thick.The bottom portion of door shutter shall be provided with UPVC board 5mm thick & 1m in height andthe balance shall be glazed excluding the shutter frame area.The shutter shall be fixed to frame using 3Nos of 3D hinges.The door shutter shall beprovided with 5mm thick sheet glass & 5mm UPVC board with EPDM rubber gasket,multi point lockingwith powder coated handles and two numbers powder coated MS tower bolts complete all as specified and as directed.The cost of glass, sheet etc shall be deemed with the quoted rate. Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. |
| 10 | Supply and fix UPVCPartition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etcall as specifed and directed.Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design) |
| 11 | Supply and fixing factory made UPVC white colour Three track three panels sliding window/partition with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,incl Glazing shall be provided with 5 mm thick Plain / frosted glassfixed with appropriate size beading as per manufacurer\"s specificationsandStainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter, complete all as specified and directed. Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution.Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 12 | S&F forFramed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framedbalusters; walkways; railings; framework ofwater tanksand similar workconforming to Fe.290.Gde-E-165 |
| 13 | Material and labour for two coat Synthetic Enamel paint on steel surface over one coat of red oxide primer incl prepareation of new steel surface complete all as specified and as directed. |
| 14 | S & F blinds of approved make roller type,Zebra pattern using polyester/PVC/vinly of approved colour/shade and pattern including operating arrangements such as chord/thread,counter weight,connecting chain etc and necessary fittings complete all as specified and as directed. Make : Vista/Levolor/Aerolux/MAC |
| 15 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and as directed. |
| 16 | M & L Pre cast cement concrete block masonry with solid blocks exc 10 cm in width and setting in mortar 1:6 using type C1 1:3:6 (20 mm graded aggregate) complete all as specified and directed. |
| 17 | M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggragate steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed |
| 18 | Material and labour for Rendering 15 mm thick in Cement Mortar 1:6on fair faces of brick work or concrete surfaceswall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M&L for preparation of newplastered surfaces of walls applying two coats of distemper, oil emulsion including alkali resistant primer over 1mm thick wall care putty complete all as specified and directed. |
| 20 | M & L forcomplete removal of existing treatment fromold plastered surface of walls and applying two coats of distemper oil emulsion with 1 mm thick putty over a coat of alkali resistant primercomplete all as per manufacturer\"s instruction and as directed. |
| 21 | M & L forcomplete removal of existing treatment fromold plastered surface of ceiling and applying two coats of distemper oil emulsion with 1 mm thick putty over a coat of alkali resistant primercomplete all as per manufacturer\"s instruction and as directed. |
| 22 | M & L forcomplete removal of existing treatment fromold plastered surface of exterior walls and applyingtwo coat of exterior acrylic emulsion weather proof paint over a coat of primercomplete all as per manufacturer\"s instruction and as directed. |
| 23 | M&L forGranite 20mm(any patern) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) 15 mm thickness of mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 24 | M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and fair as in sub base of floor etc all as directed. |
| 25 | M&L Providing25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and fair to receive the floor finish completeall as directed. |
| 26 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete ,including 15 mm thick screed bed in cement mortar 1:4 etc complete all as specified and as directed. |
| 27 | M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including15 mm thick backing coat in CM 1:4 etc complete all as specified and as directed. |
| 28 | M & L for Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,including 15 mm thick screed bed in cement mortar 1:4 etc complete all as specified and as directed. |
| 29 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.18sqm but not exc 0.38 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified. |
| 30 | M&L for coloured glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified |
| 31 | Supply and fix Vitreous china Wash Hand Basin, White, counter top oval type of size 550x450x200mm as per Cat No.FLS-WHT-5701 of Jaquar (or) C0431 Cascade NXT of Parryware or Cat No.10017 of Hindware or equivalent of other specified makes, fixed over and includingJet black Granite slab of suitable size for WHB, of18mm thick with open in centre fixed over brackets including32mm waste coupling, 32mm dia waste pipe750mm long etc.,including taking down existing one complete all as specified and as directed.Note: The unit rate quoted shall be deemed to include the cost of WHB, Granite slab, brackets, waste coupling and waste pipe |
| 32 | Supply and fixstainless steel tubular towel rack 600mm long without lower hangers but with three hooks, Chromium plated as per Cat No.ACN-1181FHS of Jaquar or T6008A1 of Parryware or of other specified makes fixed on walls complete all as specified and as directed . |
| 33 | Supply and fixcorner glass shelfmade out of 5.5 mm thickglass with cp guard rail 60 cm longand wall fixing accessories of 300mm radius matt finished, chromium plated (MCH/Colour CP) with brass brackets as per CatNo.ACN-1173 of Jaquar or T6010A1 of Parrywarefixed on walls complete all as specified and as directed . |
| 34 | S&F soap dish holder fixed to plugs with chromium plated brass screws of Make: Cat No T6902A1 of Parryware/ F580004 of Hindware/ ACN 1131N of Jaguar or equivalentall as specified and directed . |
| 35 | S&F toilet paper holder with flat recessed type stainless steel complete Make: Cat No T6906A1 of Parryware/ F890003 of Hindware/ ACN-1151N of Jaquarfixed to walls with chromium plated (CP) brass screws all as specified and directed . |
| 36 | Supply and fix, 32 mm dia PTMT 610 mm long waste pipe suitable for WHBcomplete all as specified and directed. |
| 37 | Supply and fixmirror of selected quality glass 600mmx450mm beveled edge, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 38 | S&F Vitreous China Urinal, full stall type, white(excluding flushing cistern, flush pipe andwaste pipe) all as specified and directed. |
| 39 | S&FVitreous china urinal partition white of size 310x700 mm all as specified and as directed. |
| 40 | Supply and fix vitreous China wash down water closet single piece (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and directed. Make: Parryware single piece,Hindware /Cera or eqivalent make |
| 41 | Supply and fixing plastic water closet seat for single piece closet, white , closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device complete all as specified and directed. Make: Parryware single piece,Hindware /Cera or eqivalent make |
| 42 | S&F PVC connections 15mm size with brass nuts of length 600 mm eachcomplete all as specified and as directed. |
| 43 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal . |
| 44 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings forwater supply pipes etc., laid in trenches/fixed on walls. |
| 45 | Supply and fix Two way Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type, with crutch or butterflyhandle confirming to IS screwed down, screwedfor iron pipes or for brass ferrule, fixed in repairs all as specified and as directed. |
| 46 | S & F in pillar tap 15 mm bore,cast copper alloy with capstan head,chromium plated,fancy type,confirming to IS screwed down,screwed for iron pipes or for brass ferrule, |
| 47 | S&Fhealth faucet Make:Cat No. E8342A1of Parryware /F160001 of Hindware/ALD-CHR 565 of Jaquar or equivalent including 1.2m long flexible tube and wall hook completeall as specified and as directed. |
| 48 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing.& making good, cutting not exc 10 cm grithin brick wall complete all as specified and directed. |
| 49 | Supply and fixAngular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquaror G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 50 | Supply and fix PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets,PVC flush pipe, over flow pipe etc., including taking down the exiting one complete all as specified and as directed. |
| 51 | Supply and fixPTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms. |
| 52 | Supply and fix32 mm dia Low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixedcomplete to walls, ceilings or in floorsetc. |
| 53 | Supply and fix18mm thick High Density High Moisture Resistant (HDHMR)/(HDWR) Board,both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed. Note: All exposed edges/surfaces to be finished with samelaminated sheet to match with the other surfaces and nothing will be paid extra.Make : Century/Action Tesa or equivalent. |
| 54 | Supply and fix Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 55 | Supply and fixGun metal handle ofsize150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 56 | Supply and fixMagnetic closer of suitable size forcupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 57 | Supply and fixlock for cupboard/wardrobe with two keys and key hole cover (silver,painted finish) fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 58 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and directed. |
| 59 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 60 | Disconnecting/dismantling of old existing un serviceable DB\"s any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB\"s etc. complete all as specified and directed |
| 61 | M&L forpoint wiring complete with1.5 Sq mmsingle core PVC insulated FRLSunsheathed cable 1100 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth) in and including PVC conduit with ISI mark of minimum 20 mm dia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one light point / fan / call bell point controlled by one modular switch 6 A one way |
| 62 | All asper Sl Item No 61 herein before but 3 pin socket out let 5 /6 Amps on independent board |
| 63 | M&L for point wiring complete all all as specified with 1100 Volts grade 2.5 sqmm single core PVC insulated FRLS 1000 Volts gradewith multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including stove enamelled steel conduit with ISI mark of minimum 20 mm dia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one three pin modular switch socket 16 Amps outlet on independent board |
| 64 | Supply & FixingModular type switch 6 Amp one Module, one way complete all as specified and as directed. |
| 65 | Supply & Fixing Modular type shuttered socket outlet , 2/3 Pin, 6 Amp, 230 Volts two modules with ISI mark complete all as specified and as directed. |
| 66 | Supply & FixngModular typeswitc 16 Amps one module,oneway,complete all as specified and as directed. |
| 67 | Supply & FixngModular type shuttered socket outlet,2/3 Pin, 6/16 Amp,230 volts, Two modules with ISI marked complete all as specified and as directed. |
| 68 | Supply & fixing ceiling rose , surface backlite type 65 x 50 mm , 2 to 3 terminal with ISI Mark all as specified and as directed |
| 69 | Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4 ft.) High performanceelectronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No LUMILINEPLUSPROBS20W LED865SP CSSIND OUG G |
| 70 | Supply and fixing LED lights fitting 1x 10W, 220V, AC , (2 ft.) High performanceelectronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 71 | Supply and fixing of sub main wiring 1100 Volts grade multistranded copper conductors two runs of single core 6 Sqmm along with 6 sqmm pvc insulated one run single core multistranded copper conductor cable as earth contniuity conductor run along with suitable size ofPVC conduit all as specified and as directed. |
| 72 | Supply and fixing of sub main wiring 1100 Volts grade multistranded copper conductors two runs of single core 4 Sqmm along with 4 sqmm pvc insulated one run single core multistranded copper conductor cable as earth contniuity conductor run along with suitable size of PVC conduit all as specified and as directed. |
| 73 | S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. |
| 74 | S&F Miniature circuit Breakers, SPN,of capacity 32 Amps C-Series 240 Voltswith breaking capacity 10 KA all as specified and directed. |
| 75 | S&F Miniature circuit Breakers,capacity (6-32 Amps) single pole,C-Series 240 Voltsas ordered with breaking capacity 10 KA. |
| 76 | Supply and Fixingexhaust fanPVC 250 mm sweep and connecting up including cleaning andpainting with white enamel paint one coat andprovision of cable from ceiling rose/connector to fan complete all as specified and directed. |
