Name of Work:- Repair Work Of Pathrehta Bridge Situated Over Betwa River Near Bheri Village On Rath-Jalalpur Road
Sl. No.
Item Description
1
Removal of existing cement concrete wearing coat inlcuding its disposal complete as per Technical specification without causing any detrimental effect to any part of the bridge structure and removal of dismantled material with all lift and lead upto 1000 m
2
Replacement of existing damged expansion joint by Providing and laying of Strip Seal Exp Joint System, including cleaning of gaps, dismantling of deck slab portion near expansion joint, wearing coat etc. and back filling of the recess up to final finish level with concrete of grade M - 35, complete as per approved drawing(s), M.O.R.T&H technical specification section 2607.
3
Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface od dirt, dust, oil, grease, efflorescence and applying paint @ of 1 Litre for 2 sqm.
4
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
5
Providing and fixing of averry dennision/3 M Brand RPM series 290(CAT Eye)with shank as per ASTM (RED/ YELLOW COLOUR) Made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflective in wet and Dry condition with bitumen adhesive BT 69. (MORTH 804,8.35) but without sunk
6
Drainage Spouts complete as per drawing and Technical specification
7
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing HAZARD MARKER (LEFT & Right)
8
Direction and place Identification signs up to 0.90 sqm size Board Village BoardProviding and erecting direction and place identification retró-reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection. daytime colour and luminance, shrinkage flexibility liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government/Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4858-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.37 Sheet fixed over aluminum sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild, steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-13 grade cement concrete 45x45x60 cm. below ground level as per approved drawing, complete. Abadi Board (S.Item No.19- Morth-801 8.5) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
