|
| 1 | As Per RUIDP SOR 2023 |
| 2 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground /Road top level In all types soild/saturated soil such as moorum, sand, sandy silt, black cotton soil, kankar, etc (2x3.14x4.6= 28.88) & (2x3.14x2.75=17.27) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Cement Plaster including T&P scaffolding material and complete labpour cost of water curing racking of joints etc with 20 mm cement plaster of mix 1:6 fine/coarse sand) (2pia RH) |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 7 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
| 8 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red / Chocolate Colour) Upto to 1500 Cm2 Tiles |
| 9 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 10 | Supplying, erecting and fixing in position specified precast RCC bench made of RCC grade M-30 consisting of 2 Nos. “L” shaped base support of thickness 100 mm back height 1000mm, front height 450 mm, base width 420mm and 5 Nos. RCC planks of size of 1500x100 x 50 mm and 1 Nos RCC planks of 150x200x50mm including joining all parts with galvanised nuts and bolts of suitable size. All bolts to be sealed after assembly with nice finish and appearance and level complete in all respect as per direction of engineer in charge. Every bench should have a manufacture‘s logo of appropriate size Engraved at suitable place. |
| 11 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Constructing masonry Chamber 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks |
| 13 | Providing and fixing of 60 mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. |
| 14 | PART - B ( H SCHEDULE )NON SOR ITEM |
| 15 | FOUNTAION SPECIFICATION. Designing, supply erection,commission and testing of fountain ring 3 m dia. With adjustable nozzles.The pipeshouid be made ot G.i. of 11 dia with G.i. flamges. Nut boits, Gaskets,pipe work, the manifold should be made of MS the nozzles should made of Material of construction of various components. Control valve:Brass/Gunmetal of ISI marked pipe work: ball joints Brass choromium plated with GI bend. Mountion stand Fabricated steel (excluding cost of nozzel) |
| 16 | For Umbrella |
| 17 | For Two side Fountain |
| 18 | Supply of nozzles should made of of Material of construction of various components as direction site Engineer |
| 19 | 15mm dia |
| 20 | 50mm dia |
| 21 | PUMP SET. Providing and fixing of Monobloc submersible pump of Kirlosker/crompton make AC 3 phase 380/440 Volt, 50 cycle, supply with foundation bolt, suction stainless steel mesh cover 10 Mtr. Of 2.5 sq mm submersible cable cuty insulated 150 mtr. |
| 22 | CONTRO!. PANEL. Providing and fixing of 3 HP pane box manufactured by ISO certified company for above pumps of steel sheet enclosure with front door back wall mounting type with detachable bottem plate with provision for incoming & outgoing cable, red oxide under coat and paint finish panel comprising 1 no. main incoming 4 pole MCB. |
| 23 | LIGHTS Designing, supply erection,comrnissioning and testing of lighting system of shall have change the colours continually RGB shall consist of total. 100 watt 220/230 volt light comprising high quality waterproof luminaries,wiring shall be reputed make duble insulated PVC with copper conductor not less than 1.5 sq. mm connection. |
| 24 | Construction of cone shape umbrela with reinforced cement concrete casting having upto 1.80 M dia and 100mm thick with column from foundation upto 6 M height and dia of column 23 cm. Including complete finishing work i.e.stering,pointing,colouring etc. Cost of reinforcement included Please Enable Macros to View BoQ information |
