|
| 1 | CIVIL WORK |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 5 | Cement mortar 1:6(1 cement: 6 coarse sand) |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 7 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 9 | Granite stone slab all colour exept black, Cherry/Ruby red |
| 10 | Area of slab upto 0.50 sqm |
| 11 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 12 | Granite work |
| 13 | 12 mm cement plaster of mix : |
| 14 | 1:4 (1 cement: 4 fine sand) |
| 15 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 17 | Two or more coats on new work |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 20 | Two coats |
| 21 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 22 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 23 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 24 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 25 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 26 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) |
| 27 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 28 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 29 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 30 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 31 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 32 | In cement mortar |
| 33 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 34 | Of area beyond 3 sq. metres |
| 35 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 36 | Of area 3 sq. metres and below |
| 37 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 38 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 39 | Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 40 | For fixed portion |
| 41 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 42 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 43 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 44 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. |
| 45 | All kinds of soil |
| 46 | Pipes, cables etc, not exceeding 80 mm dia. |
| 47 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 48 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 49 | Semi rigid pipe |
| 50 | 32 mm dia |
| 51 | Providing and fixing soil, waste and vent pipes : |
| 52 | 100 mm dia |
| 53 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 54 | 75mm diameter |
| 55 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 56 | Providing and fixing collar : |
| 57 | 100 mm |
| 58 | Sand cast iron S&S pipe as per IS: 3989 |
| 59 | 75 mm |
| 60 | Sand cast iron S&S pipe as per IS: 3989 |
| 61 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors |
| 62 | 100 mm inlet and 75 mm outlet |
| 63 | Sand Cast Iron S&S as per IS- 3989 |
| 64 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting chases and making good the walls etc. |
| 65 | 20 mm dia nominal bore |
| 66 | 25 mm dia nominal bore |
| 67 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe including painting with anticorrosive bitumastic paint, cutting chases and making good the wall: |
| 68 | 15 mm dia nominal bore |
| 69 | 20 mm dia nominal bore |
| 70 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 71 | 20 dia nominal bore |
| 72 | Providing & fixing of ball valve (brass) of approved quality High or low Pressure, with plastic floats complete; |
| 73 | 20mm dia nominal bore |
| 74 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 75 | 45 cm length |
| 76 | 15 mm nominal bore |
| 77 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 78 | 15 mm dia nominal bore |
| 79 | 20 mm dia nominal bore |
| 80 | 25 mm dia nominal bore |
| 81 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 82 | Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 83 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 84 | 100x100mm size P Type |
| 85 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 86 | P/F of chinaware wall mounted/wall hanging Two piece extended Eurpeon Style cistern with soft close seat cover, hinges, accessories of approved colour with all other fittings make and size as approved by EIC. |
| 87 | Make Jaquar/Cera / Hindware |
| 88 | Providing and fixing of Concealed Cistern (Flush Plates - Cento 100mm)(Size :- 38x44 x10 cm) and wall mounted frame compatible with Rag bolt distance 180mm & 230 mm Cat No.511726 or equivalent as approved by EIC |
| 89 | Providing and fixing C.P. angle valve with wall flange of Make Jaquar or equivalent model of approved makes |
| 90 | Providing and fixing C.P Bib Cock with wall flange of Make Jaquar/ Cera / Kerovit or equivalaent model of approved make. As per EIC |
| 91 | Providing and fixing of looking glass with PVC or wooden beading with screw/nut dip/plug complete in all respect make as approved by EIC Atul, Modi Guard, Saint Gobain |
| 92 | Providing and fixing CP Brass soap dish complete in all respect make as approved by EIC Jaquar /Cera / Hindware / Kerovit |
| 93 | Providing and fixing of Wall hung wash basin size 630x450x225mm with full/ Half pedestal complete with C.I./MS brackets 32mm C.P. brass waste as per standard pattern including cutting and painting of brackets and making good the walls complete in all respect make as approved by EIC Jaquar /Cera / Hindware |
| 94 | Providing and fixing of GI Tank Nipple of size 20 mm dia of approved make SVW, AVR, NVR, UNIK. |
| 95 | Providing and fixing CP Bottle Trap (with internal partition) 32mm size with wall connecton pipe & wall Flange complete in all respect as per Makes approved by EIC. |
| 96 | Providing and fixing Regular body of concealed stop cock suitable for 15mm pipe line with protection cap with exposed parts complete in all respect make as approved by EIC. |
| 97 | Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gentlyand easily.Make Johnson/ Kajaria / Nitco |
| 98 | Glazed Vitrified tiles Matt/Antiskid finish of size |
| 99 | Size of Tile 600 x 600 mm |
| 100 | Size of Tile 600 x 1200 mm |
| 101 | Providing and fixing bright matt finished stainless stell tower bolts |
| 102 | 100x10mm |
| 103 | 200x10mm |
| 104 | 300x10mm |
| 105 | Providing and fixing bright matt finished stainless steel handles with screw |
| 106 | 150mm |
| 107 | 200mm |
| 108 | providing and fixing of bright matt finished stainless steel fancy sliding door boltsa) 300*16mm |
| 109 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade : |
| 110 | One or more coats on old work |
| 111 | providing and fixing of pressimatic pillar cock with auto closing system complete in all respect make Jaguar, Cera, Hindware / Kerovit |
| 112 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 113 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 114 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 115 | 1.0 mm thick |
| 116 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 117 | Providing and fixing single equal plain junction of required degreewith access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 118 | 100x100x100 mm |
| 119 | Sand cast iron S&S as per IS - 3989 |
| 120 | 75x75x75 mm |
| 121 | Sand cast iron S&S as per IS - 3989 |
| 122 | Providing and fixing plain bend of required degree. |
| 123 | 100 mm dia |
| 124 | Sand cast iron S&S as per IS : 3989 |
| 125 | 75 mm dia |
| 126 | Sand cast iron S&S as per IS - 3989 |
| 127 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. |
| 128 | 32 mm dia nominal bore |
| 129 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 130 | 25 mm nominal bore |
| 131 | Providing Drip Seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 132 | 100 mm |
| 133 | 75 mm |
| 134 | Providing and fixing of PVC Floor Trap complete in all respect |
| 135 | Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long Easy Flex Tube in Chr ome Finish & Wall Hook complete complete in all respect make as approved by EIC. |
| 136 | Providing and Fixing of Urinal Division Plates Of Frosted Glass in shape curved or Rectangular, with 8mm th Toughened Glass complete in all respect |
| 137 | Providing and fixing of chinaware flat back Urinal size 375x390x590 mm half stall complete with CP Tube, spreader, CP Waste, clamps of approved make Jaquar, Hindware, Cera as per EIC |
| 138 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade complete in all respect |
| 139 | Size of Tile 600x1200 mm |
| 140 | Providing and Fixing of CP Pillar Tap complete in all respect |
| 141 | Providing and laying of PVC Pipe 3\" dia complete in all respect |
| 142 | Providing and fixing of chinaware Counter/ under counter WHB Oval size 560x470x190mm complete with CP Waste, clamps of approved make Jaquar, Hindware, Cera as per EIC |
| 143 | Providing and Fixing Self closing Angle Cock pressimatic for urinals with wall flange and 200 mm connection pipe complete in all respect |
| 144 | Electrical Work |
| 145 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 146 | Group B |
| 147 | Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 148 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 149 | Group B |
| 150 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 151 | 3 x 1.5 sq. mm |
| 152 | 3 x 2.5 sq. mm |
| 153 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 154 | 20 mm |
| 155 | 25 mm |
| 156 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 157 | 5/6 A switch |
| 158 | 2 way 5/6 A switch |
| 159 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 160 | 1 or 2 Module (75mmX75mm) |
| 161 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 162 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 163 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 164 | Supply and errection of 1x20 watt 4\" long LED box / Patti type fittings with decortative end caps of make Crompton CAT no. DMLNILT8-16+LT8-20-865-2 or equivalent models of make Philips/Surya make only .The LED tube rod 20 watt polycarbonate with inbuilt driver, extruded aluminium heat sink, 50000 burning hours at 70% lumens maintenance of makes Philips/Havells/Wipro/Crompton/Bajaj. The job includes carriage, erection, making connections with 3x1.5 sq.mm copper wire from adjacent light point, testing and commissioning of the fittings etc. as requried to complete the same to the entire satisfaction of engineer in charge. |
| 165 | Supply and erection of exhaust fan metalic body, Size 300mm sweep 900 RPM complete in all respect with necessary connections. The job includes Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Makes:- Havells Turbo Force SP / Crompton- EXHD 300-6 / Bajaj- Supreme Plus |
| 166 | Supply and erection of National make louver shutter with aluminium wings for exhaust fan of size 300mm on exisiting hole complete with petty material and labour requierd to complete the job. |
| 167 | Supply and erection of 19mm plywood frame with cutting of exhaust fan hole with duly painted one coat of primer and two coats of paint on existing wooden ventilator frame for fixing exhaust fan complete in all respect |
| 168 | Supply and errection of 10 watt LED batten with inbuilt driver and polycarbonate diffuser of make Crompton CAT no. LDLSRNx10CDL or equivalent models of make Philips/Wipro/ Bajaj-Ivora/Havells make only . The job includes carriage, erection, making connections with 3x1.5 sq.mm copper wire from adjacent light point, testing and commissioning of the fittings etc. as requried to complete the same to the entire satisfaction of engineer in charge. Please Enable Macros to View BoQ information |
