|
| 1 | CHAIN STITCH MACHINEa. Max. sewing speed: 6,000 sti/minb. Max. stitch length: 4mmc. Lift of the presser foot: By hand: 5.5mm , By knee: 10mmd. Needle bar stroke: 30mme. Needle (at the time of delivery): TV×7 (#14) #9–#21f. Thread take-up; Needle bar thread take-upg. Stitch length adjustment: By stitch dial (lockstitch)h. Condensation stitches: By lever for condensation stitchingi. Looper system: Rocking type looperj. Looper stroke: 22.6mmk. Lubrication: Automaticl. Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7) |
| 2 | BOTTON HOLE STITCH MACHINE a. Max. Sewing Speed: Max. 4,200 stitches/min ,Normal: 3,600 sti/min, when the non-lubricated hook(optional)is used: 3300sti/minb. Buttonhole Length: Max. 41mm (optional accessories available for up 70mm, 120mm or 220mm depending on subclass model)c. Stitch Patterns :31 standard patterns (Max. 99 patterns can be input)d. Needle (at the time of delivery) : DP×5 (#11J) #11J~#14Je. Bar tacking Width: Max. 5.0mm (with special specification part: Max.10mm).f. Lift of Work Clamp : 14mm (17mm when the reverse-rotation needle-up function is used)g. Motor Type :Compact AC servomotor (direct-drive system)h. Thread Tension :Active tension (electronic thread tension control system)i. Lubrication : Only the hook section needs a minute –quantity lubrication.(No lubrication is required when the non-lubricated hook(optional)is used).j. Control Panel : User-friendly LCD panel with standard USB port and NFC capabilityk. Power Requirement : 3-phase 200~240V/250VA. |
| 3 | TOP AND BOTTOM COVER STITCH MACHINE (Flat Lock Stitch)a. Stitch Type : 3-Needle, 5-Thread Top and Bottom Cover stitch (Stitch Type 401)b. Max. Sewing Speed: 6,500 stitches/minc. Stitch Length: 1.2 – 3.6 mm (adjustable up to 4.4 mm)d. Needle System : UY128GAS (#10S )#9S, ~ #12Se. Needle Gauge (Spacing) : 5.6 mm (standard, other options available)f. Differential Feed Ratio: 1:0.7 to 1:2.0g. Presser Foot Lift: 5 mm (with top and bottom cover stitch); 8 mm (with bottom cover stitch only)h. Lubrication System :Automatic (Forced lubrication by gear pump)i. Lubricating Oil : JUKI Machine Oil 18 (equivalent to ISO VG18)j. Power Requirement : Single-phase 100-120V / 200V–240V, 3-phase 200-240V(with automatic thread trimmer) |
| 4 | 5 THREAD OVER LOCK MACHINE a. Machine Type: High-speed, 2-needle, 5-thread over lock/safety stitchb. Max. Sewing Speed: 7,000 stitches per minute c. Stitch Length: 0.6 ~ 3.8 mm (max 4.5 mm)d. Needle Gauge : Typically 3.0, 5.0 mm or 3.0 + 2.0 mm (varies by subclass)e. Over edging Width: Typically 3.0 mm – 4.0mmf. Bottom Differential Feed Ratio: Gathering 1:2 (Max. 1:4), Stretching 1:0.7 (Max. 1:0.6)g. Needle System: DC×27 (standard, excluding some subclass model)h. Lubrication: Automatic(The needle bar mechanism and upper loop mechanism do not require lubrication.)i. Motor Type: Energy-saving, direct-drivej. Weight of machine Head: 27 kgk. Required Additional spares and AMC. |
| 5 | BUTTON STITCH MACHINE-Lock Stitcha. Max. Sewing Speed ; 2,700 sti/minb. Stitch Length : 0.1–10 mm (0.1 mm step)c. Needle Bar Stroke : 45.7 mmd. Needle (at the time of delivery) : DP×17 (#14)e. Lift of Work Clamp Foot: Max. 13 mm (standard model)f. Button Size : Round-shaped ,flat buttons, φ8–φ32 mm (2-holed, 4-holed)(varies by sub-model)g. Number of Patterns : 50 standard patterns; 999 patterns can be inputh. Memory: Max. 500,000 stitches can be stored in memoryi. Motor : Compact AC servomotor (direct-drive system)j. Lubrication :Hook: minute-quantity lubricationk. Control Panel :Integrated with machine head (standard LCD panel with USB port)l. Power Supply: Third-phase 200–240V / 230VA m. Weight : Machine head (Control box, motor, panel): 56.9 kg |
| 6 | SINGLE NEEDLE LOCK STITCH MACHINEa. Application: Light to medium-weight materialsb. Max. Sewing Speed: 5,000 stitches/minc. Max. Stitch Length :5 mmd. Needle System: DB × 1 (#14) #14~#18e. Presser Foot Lift :By hand: 5.5 mm; By knee: 13 mmf. Motor : Direct-Drive Servo Motorg. Lubrication : JUKI Machine Oil 7h. Power Consumption : 210 VAi. Machine Head Weight : 34 kg (includes motor, control box, cover)j. Needle Bar Stroke: 35 mm |
| 7 | STRAIGHT KNIFE CUTTING MACHINEa. Motors; 110V, 1ph, 50/60Hz 220V, 1ph or 3ph, 50/60Hz 380V, 3ph, 50Hz Standard: Single Speed Optional: Dual Speedb. Horsepower ; 65hp, 1ph .93hp, 3phc. Weight : 34 lbs. (15.4kg)d. Blades : Standard: Carbon Steel Optional: High Speed Steel, PTFE Coated, Wave Edge, Wave Groove, Angled Tipe. Belts; Standard: Medium Grit Optional: Fine, Coarse, Roughf. Options: Micro Fog, Plastic Master, Auto Stop Note: Autostop, Micro Fog and Plastic Master are only available in 6 in. and 8 in.g. Stroke Sizes : 1.125 in. (2.86cm) 1.25 in. (3.18cm) 1.5 in. (3.81cm) 1.75 in. (4.45cm)h. Blade Sizes :5 in. (12.7cm) 6 in (15.2 cm) 7 in. (17.7 cm) 8 in. (20.3 cm) 9 in. (22.8 cm) 10 in. (25.4 cm) 11.5 in. (29.2 cm) 13 in. (33 cm)i. Cutting Capacity : 3.5 in (8.9cm) 4.5 in. (11.4cm) 5.5 in (13.9cm) 6.5 in (16.5cm) 7.5 in. (19.1cm) 8.5 in. (21.5cm) 10 in. (25.4cm) 11.5 in. (29.2cm) Please Enable Macros to View BoQ information |
