|
| 1 | Taking down Chowkats or frame exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 2 | Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 3 | Taking down shutters of any descriptionn.exc.1Sqm each,all as specified and directed by Engineer-in-charge. |
| 4 | Taking down shutters of any descriptionexc. 1Sqm and not exc. 2Sqm each, completeall as specified and directed. |
| 5 | Taking down shutters of any description n exc 1 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed |
| 6 | Taking down shutters of any description exc 1 sqm but not exc 2.00 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed |
| 7 | M & L for inspecting joinery and carrying out petty repairs, easing adjusting door/window/kitchen cupboard shutters, tightening screws, adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs existing mongery to make the system functional complete as directed by Engineer In Charge |
| 8 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 9 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 10 | S&F MS butt hingecold rolled medium weight 100mm size |
| 11 | S&F anodised aluminium barrel tower bolt 100mm long. |
| 12 | S&F \"D\" type handle aluminium anodized 125mm in size. |
| 13 | S&F Aluminium Sliding Bolt of Size 200mm |
| 14 | S&FII nd class H/W plain solid straight chowkats or frames rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints . |
| 15 | M&L plain framed panelled shutter 35mm thick(any number of panels) with panels of timber flat or both sides or of veneered particle board mediam density wood particleboard with commercial face veneerd supplied and fitted to chowkats |
| 16 | S&F 2nd class hardwood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rebated sash bar all as specified in SSR Part - I section 8 clause No. 8.20 |
| 17 | S&F flush shutters 35mm thick, solid core construction, with block board core and plywood face panel, commercial type on both sides and one face covered with decorative face veneer with lipping/frame work to mach |
| 18 | S&F MS butt hingecold rolled medium weight 125mm size |
| 19 | S&F anodised aluminium barrel tower bolt 200mm long. |
| 20 | S&F \"D\" type handle aluminium anodized 150mm in size. |
| 21 | S&F Aluminium Sliding Bolt of Size 300mm |
| 22 | S & F300mm, ordinary rat tail rod pattern springs fixed to Steel frame or Wooden frame including roller and roller platecomplete |
| 23 | S&F 2nd class hardwood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rebated sash bar all as specified in SSR Part - I section 8 clause No. 8.20 |
| 24 | S&F MS butt hingecold rolled medium weight 75 mm size |
| 25 | S&F anodised aluminium barrel tower bolt 125mm long. |
| 26 | S&F Aluminum Hooks & eye of size 150mm fixed to window shutter |
| 27 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifiedand directed |
| 28 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 29 | M&L Two coat of synthetic enamel paint over a one coat of pink primer including preparation of new or previously untreated wooden or wood base surface of any description, not otherwise described over 10cm with or girth, complete all as specified and directed by Engineer-in-charge. |
| 30 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium frame |
| 31 | S&F in repair tubular towel rail 600mm long of PTMT fixed with & incl CP brass screws & plastic cleats min wt 170gm |
| 32 | S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, including plates and two keys, fixed in repairs, including cutting holes in existing pressed steel frames, all as specified and directed. |
| 33 | S&F in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 34 | S&F repairs 4 mm thick sheet glass frosted, on one side quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 35 | S&F 50 mm micron reflective type sun control film sticked to glass panes as per manufacturer\"s instructions all as specified and as directed including taking down old. |
| 36 | S&F in Repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifiedand directed |
| 37 | S&F in repairs anodised aluminium barrel tower bolt 150mm long. |
| 38 | S&F in repairs \"D\" type handle aluminium anodized 125mm in size. |
| 39 | S&F in repairs Aluminium Sliding Bolt of Size 200mm |
| 40 | S&F in repairs anodised aluminium barrel tower bolt 200mm long. |
| 41 | S&F in repairs \"D\" type handle aluminium anodized 150mm in size. |
| 42 | S&F in repairs Aluminium Sliding Bolt of Size 300mm |
| 43 | S&F in repairs anodised aluminium barrel tower bolt 125mm long. |
| 44 | S&F in repairs Aluminum Hooks of size 150mm fixed to window shutter |
| 45 | S & F only in repair 300mm, ordinary rat tail rod pattern springs fixed to Steel frame or Wooden frame including roller and roller platecomplete |
| 46 | S&F in repairs for 18mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type \"BB\", fixed with screws to timber frame work with decorative veneer on one face including external teak wood lipping, 6mm thick fixed with nail |
| 47 | S&F in repairsSS Auto Closing hinges Suitable for Cupboard complete all as specifiedand directed |
| 48 | S&F magnatic catcher for cup board shutters including necessary screwed complete all as specified and directed by Engineer-in-Charge . |
| 49 | S&F in repairs 2nd Class HW Plain filltes, sqaure or recatangular in section clean sawn, secured with nails or brnds of size exc 6to 13 Sq .cm |
| 50 | S&FHasp and staple,aluminium anodised , 100mm size including bolt to hinges plate and fixed with screws |
| 51 | S&F in repair for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Hold fasts similar work con- forming to Fe.290.Gde-E-165 |
| 52 | M&L for Preparation of new steel surfacesover 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 53 | S&F Door closer, of aluminium (die cast) body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight upto 60kg, fixed in repairs all as specified and directed |
| 54 | Removing existing grills from window and refixing the same after carrying out repairs for windows to external side of buidling |
| 55 | S&F Harrison rails butanodisedaluminium alloy chromium plated with fixing brackets, stops, rollers etc. |
