|
| 1 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30mm in depth, andmaking good by applying tack coat @ 5 kg/10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg/10 sqm, binded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder @0.03 cum of premixed macadam), complete all as specified and directed. |
| 2 | M&L for scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exc 400sqm andexc 50mm and n exc 100 mm deep complete all as specified and directed. |
| 3 | M&Lfor laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specification for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100kN static weight and consolidating to required gradient and camber, the finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013, complete all as specified and directed. |
| 4 | M&L for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/tack coat with paving bitumen of Grade VG-10 at 10 Kg per 10 Sqm, complete all as specified and directed. |
| 5 | M&L for providing 40mm thickconsolidated Premix bituminous, macadam using paving bitumen any penetration binder content of 6% by weight of total mix, binded with 0.09 cum of stone chippings, 6.3 mm size of grade VG-10 laid/ rolled and compacted to required gradient and camber with power roller 8 to 10 tonne to a uniform smooth surface, complete all as specified and directed. |
| 6 | M&L for preparing existing black top surfaces of roadby brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/ tack coat with paving bitumen of Grade VG-10 at 5 Kg per 10 Sqm, complete all as specified and directed. |
| 7 | M&L for bituminous premix asphaltic semi dense concrete using Job mix formula 40mm consolidated thickness with 5.5% binder content using paving bitumen of Grade VG 10 by weight of total mix, spread by means of mechanical paver, rolled and compacted to required camber and gradient with power roller 8 to 12 tonne to a uniform smooth surface, complete all as specified and directed. |
| 8 | M&L for painting lines, dashes, arrows, letters etc on roads pavements and the like not exceeding 15 cm width with hot thermoplastic paint 3mm thick in layer including 240 gm glass beads for road marking paint white or golden yellow as approved with the mechanical instrument including preparation of new or previously untreated surfaces to receive the painting, complete all as specified and directed. |
| 9 | S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed. |
| 10 | S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125x125x25mm (shank 65mm) of highefficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd, complete all as specified and directed. |
| 11 | S&F metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm), type B-1, complete all as specified and directed. |
| 12 | S&F retro reflective mandatory/ regulatory sign boards of 900mm diameter with support length of 3750 mm and made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete all as specified and directed. |
| 13 | S&F retro reflective cautionary/ warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to Class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. MS angles of size 35x35x5 mm to a vertical post made up to MS tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc., complete all as specified and directed. |
| 14 | S&F in repair speed bump of dimensions 730mm x 245mm x 70mm made out of ABS with high resistance wear and tear and with reflectors in PMMA material, welded with ABS base plate fixed on roads with adhesive and zinc plated nails, complete all as specified and directed. |
| 15 | S&F in repair convex mirror of 100Ccm dia, made up of polycarbonate reflective ABS body complete with mounting hardware, clamps and GI pipe 65mm if required height etc., complete all as specified and directed. |
| 16 | Demolition of brick or stone masonry built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block and dump the waste material outside MoD land (Jutogh Cantt), complete all as specified and directed. |
| 17 | M&L for walling of random rubble, uncoursed well bonded, built in CM (1:6) as in parapet, steps etc., complete all as specified and directed. |
| 18 | M&L for brick work with sub Class-\"B\" bricks old size straight or curved on plan built in CM 1:4, complete all as specified and directed. |
| 19 | Taking down plastering of any description and in any position in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 20 | M&L for 20mm thick rendering on other than fair faces of stone surfaces in CM 1:4 etc., complete all as specified and directed. |
| 21 | M&L for applying two or more coats of 100% premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/liter and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building/ tower, complete all as specified and directed. |
| 22 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of material from MoD land complete all as specified and directed. |
| 23 | M&L for PCC 1:2:4, type B-1, using 12.5mm graded aggregated in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throttling, as directing including necessary form work, complete all as specified and directed. |
| 24 | M&L for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 25 | M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete for steel pole with and including using necessary use and waste of form work complete all as specified and directed. |
