|
| 1 | Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises, etc complete all as specified and as directed. |
| 2 | M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqmasin floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, etc complete all as specified and as directed. |
| 3 | Ditto all as per item No 02 above but asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, etc complete all as specified and as directed. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding etc complete all as specified and as directed. |
| 5 | Ditto all as per item No 04 above but asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, etc complete all as specified and as directed. |
| 6 | M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and as directed. |
| 7 | M&L for Reinforced cemen concrete of Type B1 1:2:4 (20 mm graded aggregate) as slab supported on wall, deck slab and in shelves like etc complete all as specified and as directed. |
| 8 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars etc complete all as specified and as directed. |
| 9 | M&L formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attaches pillasters, buttresses etc; vertical or to batter etc complete all as specified and as directed. |
| 10 | M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished)in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishingetc complete all as specified and as directed.Note: Colour of granite shall be as approved by Engr-In-Charge |
| 11 | M&L precast cement concrete block masonry exc. 10 cm width with solid blockC1 (1:3:6) (using 20 mm graded stone aggregate) and settingin cement mortar (1:6) etc complete all as specified and as directed. |
| 12 | M & L for Aluminium door closer hydraulically regulated, designation No 2, unversal type suitable for door shutters of size 701mm to 850mm in width and weight between 36 kg to 60 Kg etc complete all as specified and as directed. |
| 13 | S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 etc complete all as specified and as directed. |
| 14 | S&F extruded aluminum alloy handle fabricated type anodized 150mm long etc complete all as specified and as directed. |
| 15 | S&FAluminum powder coated anodized barrel bolt of extruded section 150mm long etc complete all as specified and as directed. |
| 16 | S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminumalloy etc complete all as specified and as directed. |
| 17 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Note : Supply only floor spring, glass, SS friction hinges,particle board, wire gauze will be measured seperately |
| 18 | S&F for Powder coated Aluminium grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 19 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 20 | Supply only 12mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work or doors etc complete all as specified and as directed. |
| 21 | S&F in repairs vitreous china warewash hand basin white flat back of size 550x 400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections etc complete all as specified and as directed. |
| 22 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe and fixed etc complete all as specified and as directed. |
| 23 | S & Fin repairs Brass chromium plated towel rail, 20mm dia D-type, 60cm long between flanges etc complete all as specified and as directed. |
| 24 | S&F in repairs looking mirror 600 x 450 mm bevelled edge of selected quality glass, mounted on 6mm thk AC bldg board orcommercial ply wood & fixed to wooden plugs with chromium plated brassscrews and cup washers etc complete all as specified and as directed. |
| 25 | S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and as directed. by Engr -in- charge. |
| 26 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfacesof walls finished even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 27 | M&L for Preparation of newly plastered internal wall surface and applyingtwo coats of distemper oil emulsion over a coat of primer over the coat of 3mm thick wall care putty etc complete all as specified and as directed. |
| 28 | M&L in repairs to 18 mm thick rubco huat rubwood in built up interiors as in cupboards, shelves wall lining, box structure and including all fitting items complete all as specified and directed. After completing the carpentry works all the visible woods area will be sanding by No.60 & 80 Wood Sanding Paper, after that will be applying Sheenlac make Filler with mixing of NCD Thinner (Sheenlac make), then pasting Chock Putty in the shabby/nailing area which will be sanding with No.120 Sanding Paper, after that will applying Sealer of Sheenlac make and walnut colour stainer, then cutting with No. 320 Sand Paper, after completing the above process will spray Melamine Polish of Berger/Sheenlac make then cutting with No.400 Sanding Paper. Finally will applying Silicon make: Waxpol with soft Banyan Cloth for better shining/finishing. Make of rubber wood members: RUBCO or equivalent as approved by Accepting Officer. |
| 29 | S&F in repairs CP Angular stop cock fancy type with crutch or capstan head handle screwed down for Iron pipe and fixed etc complete all as specified and as directed. (Make :Prayag Cat No. PIS-10 H or Equivalent in JAQUAR / GEM /Leader) |
| 30 | S&F in for Corner glass self assembly size 300mm with chromium plated bracket guard and railing etc complete all as specified and as directed. (Make: Prayag Cat No. BEA-44 or Equivalent in Jaquar / Prince) |
| 31 | S&F of Venetian Blinds of PVC for windows of white/grey in colour cord mechanism to tilt and raise slates with all necessary roller fittings and similar as required forfunctioning etc complete all as specified and as directed. |
| 32 | S&F for pre painted Galvalume aluminium zinc coating GI based corrugated / trapezoidal section of steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa (AZ 150) as in roof covering fixed with self tapping screws etc complete all as specified and as directed. |
| 33 | S&F for pre painted Galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa (AZ 150) as in roof covering fixed with self tapping screws etc complete all as specified and as directed. |
| 34 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc not exceeding 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard dense soil etc complete all as specified and as directed. |
| 35 | M&L for PCCtype D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed. |
| 36 | M & L for design mix reinforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in foundation incl raft footing, foundation beams,plinth beams,bases for columns, cantilevers, bressummers etc complete all as specified and as directed. |
| 37 | M & L for design mix reinforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in Columns,pillars,piers,posts and struts etc complete all as specified and as directed. |
| 38 | M & L for design mix reinforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in beams,cantilevers,bressummers, etc complete all as specified and as directed. |
| 39 | M & L for design mix reinforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and as directed. |
| 40 | M & L for design mix reinforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in staircase including steps, etc complete all as specified and as directed. |
| 41 | M &L for rough finished flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed. |
| 42 | M & L for fair finished square,rectangular and polygonal Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and as directed. |
| 43 | M & L for fair finished flat formwork to fair finished surface of concrete flat, sides and soffitsof floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 44 | M & L for fair finsihed flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified and as directed. |
| 45 | M & L for fair finsihed flat formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) etc complete all as specified and as directed. |
| 46 | Returning ,filling in including spreading, levelling,watering and well ramming in layers not exc 25cm in hard dense soil etc complete all as specified and as directed. |
| 47 | Removing excavated materials (soils)exc 250m but n .exc 500 m and depositing where directed at a level n exc 1.5m above the starting point etc complete all as specified and as directed. |
| 48 | M&L TMT bars 5 mm dia and over upto and including 10mm dia in stirrups,ties ,spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed. |
| 49 | M&Lfor preparation of newly plastered wall surfaces with 1mm average thick wall care putty and applying two coat of oil bound distemper over one coat ofprimer including leveling the surface which undulation found with cement puttyetc complete all as specified and as directed. |
| 50 | M&L for rendering 15mm thick inCM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished evenand smooth without using extra cement etc complete all as specified and as directed.Note : WPC will be mesured and paid separetally. |
| 51 | Supply only water proofing compound. |
| 52 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004 ,Alkali & fungal resistance ,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre /10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10 sqm over new surfaces etc complete all as specified and as directed. |
| 53 | S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Fe 410-w(Gde-E-250 ) quality A etc complete all as specified and as directed. |
| 54 | M&L for aluminium wind tie of any size fixed with self tapping screwswith integral EPDM washer in roof covering etc complete all as specified and as directed. |
| 55 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and as directed. |
| 56 | S & F for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A etc complete all as specified and as directed. |
| 57 | M & Lfor Anodised aluminium snap grid frame work for false ceiling 605mm x 605mmusing aluminium anodized sections specified in SSR part-I 1991 including cutting, drilling jointing etc complete including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including Providing 6mm thick E-boards classic 605mm x 605mm size at any height upto 12m with necessary scaffoldings etc complete all as specified and as directed |
| 58 | S&F PVC (SWR) (type\"B\") pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls including fitting with PVC Clamp as per manufacturer\"s instructions etc complete all as specified and as directed. |
| 59 | S&F for 110mm dia PVC (SWR) bends any radius etc complete all as specified and as directed. |
| 60 | S&F for 110mm dia PVC (SWR) bends with acess door any radiusetc complete all as specified and as directed. |
| 61 | M&L for Cement concrete P.C.C (1:4:8) Type D2 (using 40 mm graded aggregate) as in sub base100 mm thk etc complete all as specified and as directed. |
| 62 | M&L Chequered cement concrete tiles (glossy finish) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors,over and Including 20mm thick screed bed in CM 1:6 etc complete all as specified and as directed. |
| 63 | S&F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-304 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location etc complete all as specified and as directed. |
| 64 | M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished)in steps tread, riser etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishingetc complete all as specified and as directed. (Note : Colour of granite shall be as approved by Engr-In-Charge) |
| 65 | Rounding to edges of stone slabs / Granites one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed. |
| 66 | Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets,junction/terminal boxes etc;removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces, etc complete all as specified and as directed. |
| 67 | Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes etc complete all as specified and as directed. |
| 68 | Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes etc complete all as specified and as directed. |
| 69 | M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVCinsulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealedin walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green incolour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab. |
| 70 | Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 71 | All as per Srl item No 69 above, but, One light/fan point controlled by one switch 5 Amps one way etc complete all as specified and as directed. |
| 72 | All as per Srl item No 69 above, but, for two light point controlled by one switch 5 Amps one way etc complete all as specified and as directed. |
| 73 | All as per Srl item No 69 above, but, point wiring for 5 pin switch socket outlet , 6 Amps on independent board etc complete all as specified and as directed. |
| 74 | All as per Srl item No 69 above, but, point wiring for 3 pin switch socket outlet , 5 Amps on same board etc complete all as specified and as directed. |
| 75 | All as per Srl item No 69 above, but, point wiring with 2.5 sqmm wire for 3 pin switch socket outlet , 5 Amps on independent board etc complete all as specified and as directed. |
| 76 | All as per Srl item No 69 above, but,point wiring with 4.0 sqmm PVC FRLSH insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board etc complete all as specified and as directed. |
| 77 | All as per Srl item No 69 above, but,point wiring for 3 pin switch socket outlet ,15 Amps on same board etc complete all as specified and as directed. |
| 78 | Description same as per item Sl No 69 above, but, One light point controlled by two 2-way switches etc complete all as specified and as directed. |
| 79 | S & F for switchmodulartype, 6 Amps 1 module, 230 volts AC circuit etc complete all as specified and as directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 80 | S & F for switchmodulartype, 16 Amps 1 module, 230 volts AC circuit etc complete all as specified and as directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 81 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit etc complete all as specified and as directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 82 | S & F Socketoutlet 2 in 1 modular type,3 pin, 6 and 16 Amp , universal etc complete all as specified and as directed. Roma (Anchor)/ Legrand/ Havells |
| 83 | Supply & fix Modular Ac Box With 20A DP MCB \"C\" Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall etc complete all as specified and as directed.Make:- Anchor (Roma) model no 98492 or equivalent in L&T / Havells |
| 84 | S & F of LED slim panel lighting fixture of 18 Watt recessmounted220V , 50Hzwith finished in premium white powder coating ,environmental friendly energy efficient fitting recessmounted round/squarein shape(Warm white/ white colour as per requirement of site complete) of light as required at site) etc complete all as specified and as directed. Make - Luker Cat Part No : LNPR18 or equivalent make inCG/ Philips/ Havells. |
| 85 | Description same as per item Si No 75 above but,15 watt etc complete all as specified and as directed. Make - Luker Cat Part No : LNPR15 or equivalent make inCG/ Philips/ Havells |
| 86 | S & F andtesting LED recessed mounted 595 mm x 595 mm luminarie with high transmitive diffuserof cap 40 watt, with longer life and less maintenance including all accessories and fixing arrangements for fixing the light fitting etc complete all as specified and as directed. Make: LUKER model No LKM 2240 of any colour (WH/NWH/WW) as reuired or equivalentto Philips/CG/ Havells . NOTE for item no 75 to 77:- The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting . |
| 87 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades, deposite to E/M store etc complete all as specified and as directed. |
| 88 | S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V AC, 50 Hz with all accessories alogwith providing and connecting up with 1.0 sqmm 3 core flexible copper conductor of suitable length from connector of fan to ceiling rose and testing etc complete all as specified and as directed by Engr In charge.Make: Usha , Model No TECHNIX or equivalent to CG/ Havells/ Orient |
| 89 | S & F stepped type modular fan regulator, 2 modular type etc complete all as specified and as directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 90 | Supply & fixingWall mounting fan 400 mm sweep, 2100 RPM, 110 Watt incl all fixing arrangement etc complete all as specified and as directed. Make: Luker Model No :400 mm Tempest HS or equivalent to CG/ Usha/ Orient |
| 91 | S & F Sub main wiring with PVC insulated cable 2 single core 6.0 sq mm, FRLSH, 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC conduitconcealed/surface in wall/surface(ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 6.0 sq mm, FRLSH for earthcontinuity etc complete all as specified and as directed. Make of wire : Polycab/Gloster /Anchor/ Havells/ Finolex and Make ofPVC conduit : Modi/ Precision/Supreme/ Finolex/ Polycab |
| 92 | All as per item No 82 above but 4.0 sqmm. Note (for item No 82 & 82.01) : 3 lengthof cable and one length conduit shall be measured and paid for one length etc complete all as specified and as directed. |
| 93 | S & F Sub main wiring with PVC insulated cable 4 run single of 10 sq mm, FRLSH, 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC conduitconcealed/surface in wall(ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 10.0 sq mm, FRLSH,for earthcontinuity all etc complete all as specified and as directed.Make of wire : Polycab/Gloster /Anchor/ Havells/ Finolex and Make ofPVC conduit : Modi/ Precision/Supreme/ Finolex/ PolycabNOTE : 5 lengthof cable and one length conduit shall be measured and paid for one length . |
| 94 | S & FDB VTPNsheet metal enclosure double door suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP (IP-43) Protection Triplepole and neutral 415 V 6 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated etc complete all as specified and as directed. |
| 95 | S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated busbar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply doubledoor SP&N DB system12 ways,including taking down old unserv DB of any type /rating and making good to the distrubed surface /walls etc complete all as specified and as directed. |
| 96 | All as per item No 85 above, but ,8 way etc complete all as specified and as directed. |
| 97 | S & F in replacement of MCCB, 3 pole, 100 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release alongwith copper separator terminals etc complete all as specified and as directed. |
| 98 | Supply & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA etc complete all as specified and as directed. |
| 99 | S & FMCB SP 06-32 Amps (`C’ series) having current rating 10 KA etc complete all as specified and as directed.Note for item No 86.0 to 88.0:- Termination of all wiring in to MCBs/ MCCBs/DBs shall be through copper lugs/ thimbles of adequate capacity. |
| 100 | Taking down carefully existing split type air conditoner of any make,type, size and any tonnage keep in safe custody of contractor and painting the outer area and re-fixing the same its location incl gas charging, providing of Copper tube as required length with wrapping tape after completionof work etc complete all as specified and as directed. |
| 101 | Taking down carefully existing smoke/heat detectorof any make,type, sizekeep in safe custody of contractor and painting the outer area and re-fixing the same its location after completionof work etc complete all as specified and as directed. |
| 102 | Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement etc complete all as specified and as directed by Engineer-in- Charge. |
| 103 | Supply and fixing with wall, piller, wooden structure etc. uPVC Panel Trunking of size 60 mm (H) x 60 mm (W) for running of wire, cable of any type etc complete all as specified and directed by Engr In charge. Make :- Precision or equivalent to Supreme |
| 104 | Earthing complete with galvanisedearth plate electrode 60 cm x 60 cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means boltsand nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,.CI cover with frame etc including necessary excavation in any type of strata , returning, fillingremoval of soil outside MD land ,filling ofcharcoal andsalt complete all as shown in electrical plate No.3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mmc/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II.2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. |
| 105 | Supplying, fixing andtesting Tube light fittings aluminium housing, Diffuser slim Integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting etc complete all as specified and as directed.anddirected. Make: Philips Cat Part No : BN021C LED22S or equivalent to CG/ Havells/ Luker |
| 106 | S & F30 wattsLED building security light fittings , pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessaryfixing arrangements as per site requirements class etc complete all as specified and as directed. by Engr In charge. Make : Luker Cart Part No: LSTE030S or equivalent to Philips /Havells/ CG |
| 107 | Supply and fixing new GI brackets of GI pipe light grade of size 32 mm dia including nuts, bolts and washers for building security light etc complete all as specified and as directed. |
