|
| 1 | Execution of work |
| 2 | Provision for Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (first sort), in cement mortar 1:6 (1 cement: 6 coarse sand) |
| 3 | Provision for Coping with 50 mm thick sand stone on top of wall with 20 mm. thick bed ofmortar of ratio 1:6 cement and c sand . Coping stone to be laid with fine dressing and making side end as semi circular shap (Bull nose type) etc complete including all the labour material and T&P required proper completion of work at the site. |
| 4 | Supply and fixing of MS grill railing/fencing on the boundary wall for safety and security of the site with MS angle 40x40x5mm vertical post and same size angle horizontal support of top and bottom for adjoining the frame 12mm dia bar witharrow headed on top and placed vertically at a distance of 10 cm c/c and 40x5 mm flat iron Both grill railing panel fixed together by nut boltetc complete as per design/drawing attached. Department including all the labour, material & fabrication fixing etc with all completion. (Grill Panel size 2.00 x 0.90 mtr). |
| 5 | Provision for fixingM.S. Gate with two leaf with angle iron 50x50x6 mm, flat iron 50x6 mm and 16 mm dia bars witharrow headed on top and placed vertically at a distance of 100mm c/cfabricated as per design/drawing attached including all the supply of materials fabrication and fixing of the same. Required proper completion of work at the site. ( M.S. gate two leaf size 3.00 x 1.80 mtr) |
| 6 | Provision for fixingM.S. Gate with Single leaf with angle iron 50x50x6 mm, flat iron 50x6 mm and 16 mm dia bars witharrow headed on top and placed vertically at a distance of 100mm c/cfabricated as per design/drawing attached including all the supply of materials fabrication and fixing of the same. Required proper completion of work at the site. ( Size 1.50 x 1.80 mtr) |
| 7 | Provision for flush pointing on stone work of boundary wall with cement mortar 1:3 (1 cement : 3 fine sand) including racking, cleaning and washing out of joints etc complete. |
| 8 | Provision for applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel works. |
| 9 | Provision for painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 10 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m-All kind of soil. |
| 11 | Provision for making of masonry tank of size 2.50 x 1.50 x 0.90 mt. for slacking of lime, mixing grinding of lime mortar for conservation work. tank will be made by stone masonry, cement concrete etc. Including all the supply of material labour & T & P. Required proper completion of work at the site. |
| 12 | Provision for fixing of Culture Notice Board with sand stone tablet and base pillar of appropriate size as per designed by the department by engraving of letters in bilingual of suitable size. Including all supply material, finishing, engraving and fixing etc. Including all the labour, material and T&P. required proper completion of work at the site. |
| 13 | Provision for fixing of DIRECTION NOTICE BOARD with 50 mm Ø and 25 mm Ø stainless steel pipe and iron sheet of thickness 18 gauge fabricated as per designed by the department with 25x3mm steel strip. Size of display board is 1.50x1.20 mt. and height of board will be 3.00 mt. Including pasting of high visibility micro prismatic p.v.c. reflective sheet both side in bilingual as directed by the department. Board to be fixed with P.C.C. of mortar of ratio 1:2:4: cement c.sand and stone gritt 20 mm. Including all the labour, material and T&P. Required proper completion of work at the site. |
