|
| 1 | Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherevernecessary and refilling the sides of foundation withexcavated earth in layers of 15cm thick and depositingthe surplus earth |
| 2 | Laying stone jelly concrete 1:3:6 for providing the stoneflooring in and around the temple area including cost ofall materials, labours and conveyance charges etccomplete. |
| 3 | Providing Reinforced Cement Concrete including steelreinforcement work using with TMT steel bars to basefoundation concrete for strengthening the beams withnecessary form work and laying stone jelly concrete1:2:4 including cost of all labours, materials and othercharges etc., complete |
| 4 | Providing and erecting in position MS Beam for Column\"I Section beam\" - ISMB in flange size of 208x10mm and web size of 450x5mm including Transporting, Loading ,Unloading, Welding Charges, lifting and Erection Charges , applying one coat enamel primer etc complete |
| 5 | Supplying, cutting, making in to size and erecting in position MS Beam for Columnand rafter \"I Section Beam\" - ISMB in flage size of150mm and web size of 300 to 450mm with a thicknessof 9.40mm including Transporting, Loading , Unloading,Welding Charges, Erection Charges , Wastage etc |
| 6 | Supplying, cutting, making in to size and fixing by bolts/welding MS Base plates using 20mm thick MS plate ofsize 600 X 400mm for fixing the MS column at top of the foundation area welding and other fixing charges etc., |
| 7 | Supplying, cutting, making in to size, fixing in position for MS beam at floor level all around forproviding / extending passage in future using ISMC 300,of size 300 X 90 mm X 7.8mm thickness with necessaryfabrication, welding and other fixing charges etc., |
| 8 | Supplying, cutting, making in to size, fixing in position MS Purlins LC size of 250mm x65mm x 20mm with a thickness of 2.30mm as a length of4.30m with a gap of 1.50m for fixing the top layer of the roof shed in between of MS channels with necessaryfabrication charges and other charges etc., complete |
| 9 | Supplying, cutting, making in to size, fixing in position MS Gable end rafter plates and eave boardswith a size of 250mm x 65mm rectangular tube with athickness of 3mm for fixing the MS purlins both sides onthe roof area including cost of all welding charges andother charges etc complete. |
| 10 | Supplying, cutting, making in to size, fixing in position MS 12mm dia round rods to fixing on the purlins for laying Corrugated GS Roof sheet including cost of all welding charges and other charges etc., complete. |
| 11 | Supplying and laying Corrugated GS roof sheet with a thickness of1mm including Transporting, Loading , Unloading,Welding Charges, Erection Charges , Wastage andothers etc., |
