|
| 1 | Item No. 1:-Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. (By Mechanical Means) SSR item no 12.03, Page no. 84 |
| 2 | IItem No. 2:- Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. SSR item no 12.08, Page no. 84 |
| 3 | Item No. 3:- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR item no 21.38, Page no. 157 |
| 4 | Item No.4:- Providing and laying in situ / ready mix controlled grade of M15 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) VSI sand crushed, excluding reinforcement) SSR item no 12.55, Page no. 90 |
| 5 | IItem No. 5:- Providing and laying in situ / ready mix controlled grade of M25 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement).SSR item no 12.59, Page no. 90 |
| 6 | Item No.6;- Providing and laying insitu/ready mix M-30 controlled cement concrete of trap/granite/quartzite/gneiss metal for RCC work in solid/deckslab etc. including ramming,vibrating, curing, formwork,centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLCwith SCADA enabled concrete batch mix plant /pan mixer and fine agreegates of required specifications(VSI sand finely washed etc) (i) Height upto 5m,normal rate. SSR item no 14.47, Page no. 94 |
| 7 | Item No. 7:- ProvidingandlayinginsituM40controlledcementconcreteoftrap/granite/quartzite/gneissmetalforPSCworkinsolid/deckslabetc.includingramming,vibrating,curing,formwork,centeringandfinishingincementplasterexcludingreinforcementetc.complete.(withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledconcrete batch mix plant / pan mixer with natural sand) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.SSR item no 14.90, Page no. 102 |
| 8 | Item No.8:- Providing and laying of RCC in M30 grade approach slab including reinforcement and formwork complete with fully automatic micro processor PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and technical specifications etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ).SSR item no 14.59, Page no. 98 |
| 9 | Item No. 9:-Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates.SSR item no 11.25, Page no. 82 |
| 10 | Item No..10:-Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. SSR item no 14.01, Page no. 93 |
| 11 | Item No. 11:- Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete SSR item no 14.88, Page no. 101 |
| 12 | Item No. 12:- Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete.SSR item no 12.72, Page no. 91 |
| 13 | Item No. 13:- Providing 100mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete.SSR item no 14.50, Page no. 97 |
| 14 | Item No. 14:- Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. SSR item no 17.37, Page no. 132 |
| 15 | Item No. 15:- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates).SSR item no 3.30, Page no. 30 |
| 16 | Item No. 16:- BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates).SSR item no 3.50, Page no. 34 |
| 17 | Item No. 17:- Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. Complete Item SSR item no 14.33, Page no. 95 |
| 18 | Item No. 18:- Back filling behind abutment, wing wall and return wall as per drawings and tech.SSR item no 12.71, Page no. 91nical specifications etc. complete. (by sandy material) |
| 19 | Item No. 19:- Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. SSR item no 3.11, Page no. 28 |
| 20 | Item No. 20:- Recovery of Royalty Charges as per Government of Maharashtra, Revenue and Forest Departments Gazette No 67 dated 15 May 2015 at the rate of Rs 144.16/158.29 per Cum against the utilization of murrum/soil, solling/rubble and hand broken metal, sand . (The said amount will be added in the bill of the contrator and will be equally deducted) (Fixed Rate) (A) Rubble/Solling/Hand Broken metal SSR General Note 4.50,Spec No MORTH 806 |
| 21 | Item No. 21:- Recovery of Royalty Charges as per Government of Maharashtra, Revenue and Forest Departments Gazette No 67 dated 15 May 2015 at the rate of Rs 144.16/158.29 per Cum against the utilization of murrum/soil, solling/rubble and hand broken metal, sand . (The said amount will be added in the bill of the contrator and will be equally deducted) (Fixed Rate) (B) Sand SSR General Note 4.50,Spec No MORTH 806 |
