Tender For Construction Of Quarters For A) Cmo/Dmd, Dlos, B) Nurses And Staffs At Pherzawl District, Manipur
Tender Value
5.13 Crore
Estimated cost
Bid Submission
13 Feb 2026
0 days left
EMD
10.26 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pherzawl → Manipur
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Quarters For A) Cmo/Dmd, Dlos, B) Nurses And Staffs At Pherzawl District, Manipur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Feb-2026 | Date Extension Construction of Quarters for a) CMO/DMD, DLOs, b) Nurses and staffs at Pherzawl District, Manipur | Date | 13-Feb-2026 |
| 2 | 22-Jan-2026 | Date Extension for Construction of Quarters for a) CMO/DMD, DLOs, b) Nurses and staffs at Pherzawl District, Manipur | Date | 10-Feb-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Quarter for CMO/DMD, DLOs at Pherzawl, Manipur. |
| 2 | SH: Type -IV Qrt |
| 3 | EARTH WORKS: |
| 4 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m |
| 5 | All kinds of soil. |
| 6 | Filling availabte excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layerby ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 7 | Supplying and filling in plinth with sandy soil under floors including, cum watering,ramming consolidating and dressing complete. |
| 8 | CEMENT CONCRETE WORKS: |
| 9 | Providingand layingcement concretein foundation and plinth excludingthe cost of centering andshuttering in |
| 10 | 1:4:8 ( 1cement:4 coarse sand:8 gradedstone aggregate 40mm nominal size) |
| 11 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (Icement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 12 | Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 13 | REINFORCED CEMENT CONCRETE WORKS: |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 15 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement. |
| 17 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 18 | Reinforced cement concrete work in beams, suspended floors,roofs having stope upto 15o 9 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 19 | Reinforcementfor RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 20 | a)Thermo-Mechanically Treated bars |
| 21 | Reinforcementfor RCC work including straightening, cutting, bending, placing in position and binding all complete.Above plinth level |
| 22 | a)Thermo-Mechanically Treated bars |
| 23 | FORM WORKS |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 25 | Foundations, footings, bases of columns, etc. for mass concrete |
| 26 | Lintels, beams, plinth beams, girders, bressumers ands cantilevers. |
| 27 | Suspended floors, roofs, landing, balconies and access platform. |
| 28 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 29 | Stair cases with sloping or stepped, soffits i/c risers and stringers excluding landing |
| 30 | Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards |
| 31 | BRICK WORKS: |
| 32 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 33 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) insuperstructure. Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 34 | Extra for half brick masonry in superstructure abovefloor two level . |
| 35 | Brick edging 7cm wide 11.4 cm deep to plinth protection with 1st class common burnt clay F.P.S. ( non- modular) bricks including grouting with cement mortar 1:4 (1cement:4fine sand) |
| 36 | WOOD WORKS: |
| 37 | Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately. a) Local best quality Uningthou Wood |
| 38 | Providing and fixing panelled or panolled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. a) Local best quality Teak Wood. 35 mm thick shutters |
| 39 | Providing and fixing nickel plated MS pipe curtain rods with nickel plated brackets |
| 40 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc |
| 41 | Providing and fixing bright finished brass 100 mm mortice latch withone dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 42 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS1868) transparent or dyed to required COIOUr or shade with nutsand screws etc. complete250 x 16 mm |
| 43 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete 250x10 mm |
| 44 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete 100 x 10 mm |
| 45 | Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125 mm |
| 46 | Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 75 mm |
| 47 | STEEL WORK |
| 48 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required ) and fitting the same with necessary stainless steel. |
| 49 | FLOORING |
| 50 | Providing and laying Vitrified tiles in floor in diffe rent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.080/0 and conforming to 19.15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will bo done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubbermallet for placing the tiles gently and easily. Sizes of Tiles 600x600 mm (Double charged) |
| 51 | Providing and laying vitrified tiles in different sizes (thickness to be specefied by manufacture), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement motar 1:3 (1cement:3c/sand), jonting with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. sizes of tile 600x600 mm |
| 52 | WATER PROOFING: |
| 53 | Supplying and applying bituminious solution primer on roof and or wall surface at 0.24 litre per sqm |
| 54 | ALUMINIUM WINDOWS |
| 55 | Providing and fixing aluminium works for doors windows, Ventilators and partions worth extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/ Neoprene gasket etc. Aluminium snap beading for glazing / panelling, C.P. Brass / Stainless steel screw, all complete as per architectural drawing and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) For shutters of doors, windows & ventilators including, providing and fixing hinges/ pivots and making provision for fixing of titting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately).For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minium anodic coating of grade AC 15) |
| 56 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness |
| 57 | FINISHING: |
| 58 | 6mmcement plasterof mix : 1:3 ( 1 cement : 3 f/s ) |
| 59 | 12 mmcement plaster of mix :1:4 ( 1 cement : 3 C/s ) |
| 60 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) |
| 61 | 15mmcement plaster onroughside of single or half brick wall finished with a floating coat of neat cement of mix: |
| 62 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer:- |
| 63 | finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm). |
| 64 | Applying priming coat:- With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 65 | Two or more coats applied @ 1.25 ltr/IO sqm. over and including one sqmRs. 126.9B coat of Special primer applied @0.75 ltr/10 sqm. |
| 66 | Providing and applying white cement based putty of average thickness Imm,of approved brand and manufacturer, over the plasterod wall surface to prepare thesurface even and smooth complete. |
| 67 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work |
| 68 | S.H: Water Supply & Sanitary Installation |
| 69 | Earth work in surface excavation not exceeding 30 cm in depth butexceeding m in width as well as 10 sqm on plan including disposalof excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be All Kinds of soil |
| 70 | Filling available excavated earth (excluding rock) in trenches. plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layerby ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 71 | Concrete |
| 72 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: ( 1 Cement.• 3 coarse sand 6 graded stone aggregate 40 mm nominal size) |
| 73 | 1:4:8 ( 1 Cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size) |
| 74 | FORM WORKS: |
| 75 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete |
| 76 | Suspended floors, roofs, landings, balconies and access |
| 77 | RCC WORKS: |
| 78 | Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 79 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.Thermo-Mechanically Treated bars |
| 80 | PRE-CAST: |
| 81 | Providing, hoisting and fixing upto floor five lovol procast reinforced comont concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the tike including tho cost 01 required contoring, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3graded stone aggregate 20mm nominal size). |
| 82 | Brickworks: |
| 83 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: cum Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 84 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 85 | Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand) |
| 86 | Flooring: |
| 87 | Cement concrete flooring 1:2:4 (I cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost Of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. |
| 88 | Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement 18 mm thick |
| 89 | SANITARY INSTALLATION |
| 90 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with scat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever). conforming to IS : 7231. with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 91 | White Vitreous China Wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps |
| 92 | Providing and fixing a mm dia C.P. / Ses Jct with flexible tube upto 1 metre tong with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 93 | Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 94 | Providing and fixing 600x450 mm bovolod cdgo mirror of superior 1,053.30 glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete. |
| 95 | Providing and fixing PTMT liquid soap container 109 mm wide, 125each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 96 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 97 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 98 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm dia |
| 99 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm dia |
| 100 | Water Supply |
| 101 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc. 20 mm diameter |
| 102 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing 01 pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm diameter |
| 103 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing 01 pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm diameter |
| 104 | Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. External work 32 mm diameter |
| 105 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm diameter |
| 106 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm diameter |
| 107 | Providing and placing on tcrrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and tho baso support for tank. |
| 108 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points Of approved quality conforming to IS:893115 mm nominal bore |
| 109 | SH: Providing and Installation of Internal Elrctification . |
| 110 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 111 | Group A |
| 112 | Group B |
| 113 | Group C |
| 114 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed steel conduit 2 way modular type switch modular plate suitable size G.I box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as reqd |
| 115 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 116 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 117 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 118 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 119 | 2 X 10 sq. mm + 1 X 10 sq. mm earth wire |
| 120 | Supplying and drawing (following pair) 0.5 sqmm FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as reqd 4 Pair |
| 121 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 122 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 123 | 5/6 A switch |
| 124 | 2 way 5/6 amps switch |
| 125 | 15/16 A switch |
| 126 | 3 pin 5/6 A socket outlet |
| 127 | 6 pin 15/16 A socket outlet |
| 128 | Telephone socket outlet |
| 129 | TV antenna socket outlet |
| 130 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 131 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.. |
| 132 | 1 or 2 Module (75 mmX75 mm) |
| 133 | 4 Module (125 mmX75 mm) |
| 134 | 6 Module (200 mmX75 mm) |
| 135 | 8 Module (125 mmX125 mm) |
| 136 | 12 Module (200 mmX150 mm) |
| 137 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 138 | Supplying and fixing brass batten/ angle holder including connections etc. as required. |
| 139 | SUB HEAD-II : MCCB, MCB & DB’S |
| 140 | Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.160 A, 10 kA |
| 141 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 142 | 8 way, Double door |
| 143 | 12 way, Double door |
| 144 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as requiredSingle pole |
| 145 | Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd 63 amps |
| 146 | SUB HEAD-III: RISING MAIN AND BUS TRUNKING |
| 147 | Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required. 200 A, TPN |
| 148 | SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE) |
| 149 | Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required. With CFL 12/15 Watts Lamp. |
| 150 | Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containingCFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required(havell,s /Bajaja/Phillips/Cromton). Ceiling fitting (Surface) with 12/15 watt LED Lamp. |
| 151 | Supplying, Instaling, testing and commissioning of (pre-wired) bulk head fitting with glass complete containingLED lamps per fitting, complete with all accessories including connection etc. as required(havell,s /Bajaja/Phillips/Cromton). With 7 Watts LED Lamp. |
| 152 | Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.(havell,s /Bajaja/Phillips/Cromton). 1200 mm sweep |
| 153 | Supplying, Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 225mm sweep |
| 154 | LAND DEVELOPMENT |
| 155 | Excavation in Soil with Dozer with lead upto 1000 meters(Excavation for road way in soil by mechanical meansincluding cutting and transporting the earth to site ofembankment/dumping area with lead upto 1000 metersincluding trimming bottom and side slopes in accordancewith requirements oflines, grades and cross sections.) |
| 156 | Construction of embankment with material obtained from borrow pits (Construction of embankment with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) |
| 157 | Construction of Quarters for Nurses & Staffs at Pherzawl District, Manipur. SH: MAIN BUILDING EARTH WORKS: |
| 158 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 159 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 160 | Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete. |
| 161 | CEMENT CONCRETE WORKS: |
| 162 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All Works upto Plinth Level 1:4:8(1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 163 | 1:3:6(1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 164 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4( 1 cem : 2 c/and : 4 gr st aggrt 20 mm n/size and down size) finished with a floating coat of neat cement. |
| 165 | REINFORCED CEMENT CONCRETE WORKS: |
| 166 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 167 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 168 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 169 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars. |
| 170 | FORM WORKS |
| 171 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. |
| 172 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 173 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 174 | Weather shade, Chajjas, corbels etc., including edges. |
| 175 | Suspended floors, roofs, landings, balconies and access platform. |
| 176 | Stairs, (excluding landings) except spiral-staircases. |
| 177 | BRICK WORKS: |
| 178 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 179 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level in Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 180 | WOOD WORKS: |
| 181 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : Local best quality Uningthou wood |
| 182 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Local best quality Teak wood35 mm thick shutters |
| 183 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. Local best quality Teak wood35 mm thick |
| 184 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 25 mm dia. |
| 185 | Providing and fixing 25 mm thick shutters for cupboards etc. including ISl marked black enamelled M.S. butt hinges with necessary screws : Panelled or panelled and glazed shutters Ist class Teak wood. |
| 186 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm. |
| 187 | Providing and fixing M.S. Grill of required pattern to wooden frame of windowetc with M.S. flat at required spacing & frame all round bar with round headed bolt & nuts or by screw. Fixed to steel windows by welding. |
| 188 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 189 | P/F Brass Tower bolts (barrel type) withscrews etc. complete . 250 X 10mm. |
| 190 | P/F Brass Tower bolts (barrel type) withscrews etc. complete . 100x10 mm |
| 191 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 192 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100mm |
| 193 | Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. |
| 194 | STEEL WORK |
| 195 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 196 | Steel work in built up tubular(round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. Hot finished welded type tubes |
| 197 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than275gm/m2 |
| 198 | FLOORING |
| 199 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption\"s less than 0.080/0 and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm |
| 200 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of stepts , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. sizes of tile 600x600 mm |
| 201 | Marble stone flooring with18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with :Makrana white second quality. |
| 202 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shadecomplete Marble tiles (polished) Raj Nagar. 8 mm thick. |
| 203 | FINISHING |
| 204 | 12 mmcement plaster of mix :1:4 ( 1 cement : 4 fine sand ) |
| 205 | 15mmcement plaster onroughside of single or half brick wall finished with a floating coat of neat cement of mix: |
| 206 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer:- |
| 207 | Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm). |
| 208 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 209 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. |
| 210 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 211 | MISCELLANEOUS |
| 212 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 213 | S.H: WATER SUPPLY & SANITARY INSTALLATION EarthWork |
| 214 | Earth work in surface excavation not exceeding 30 cm in depth butexceeding m in width as well as 10 sqm on plan including disposalof excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be All Kinds of soil |
| 215 | Filling available excavated earth (excluding rock) in trenches. plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layerby ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 216 | Concrete Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: ( 1 Cement.• 3 coarse sand 6 graded stone aggregate 40 mm nominal size) |
| 217 | 1:4:8 ( 1 Cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size) |
| 218 | FORM WORKS: |
| 219 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete |
| 220 | Suspended floors, roofs, landings, balconies and access |
| 221 | RCC WORKS: |
| 222 | Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 223 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars |
| 224 | PRE-CAST: |
| 225 | Providing, hoisting and fixing upto floor five lovol procast reinforced comont concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the tike including tho cost 01 required contoring, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3graded stone aggregate 20mm nominal size). |
| 226 | Brickworks:Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: cum Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 227 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 228 | Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand) |
| 229 | Flooring: |
| 230 | Cement concrete flooring 1:2:4 (I cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost Of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. |
| 231 | Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement18 mm thick |
| 232 | SANITARY INSTALLATION |
| 233 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with scat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever). conforming to IS : 7231. with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 234 | White Vitreous China Wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps |
| 235 | Providing and fixing a mm dia C.P. / Ses Jct with flexible tube upto 1 metre tong with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 236 | Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 237 | Providing and fixing 600x450 mm bovolod cdgo mirror of superior 1,053.30 glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete. |
| 238 | Providing and fixing PTMT liquid soap container 109 mm wide, 125each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 239 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 240 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 241 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge |
| 242 | 75 mm dia |
| 243 | 110 mm dia |
| 244 | Water Supply: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc. 20 mm diameter |
| 245 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing 01 pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm diameter |
| 246 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing 01 pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm diameter |
| 247 | Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. External work 32 mm diameter |
| 248 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm diameter |
| 249 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm diameter |
| 250 | Providing and placing on tcrrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and tho baso support for tank. |
| 251 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points Of approved quality conforming to IS:8931 15 mm nominal bore |
| 252 | SUB HEAD: ELECTRIFICATION INSTALLATION |
| 253 | Wiring for light/Fan point/Exhaust Fan point/Call bell point with 1.5mm²FRPVC insulated copper conductor single core cable in surface/recessed steel conduit with modular type switch modular plate,suitable G.I.box and earthing the point with 1.5mm²FRPVC insulated copper conductor single core cable etc.as required. |
| 254 | 1) Gr. A |
| 255 | 2) Gr. B |
| 256 | 3) Gr. C |
| 257 | Suitable size GI box with modular plate and in front on surface or in recess i/c p/f 6 pin 16/15 amp modular socket outlet 15/16 amp modular switch, connection painting etc as required |
| 258 | s/f suitable size G.I box with modular plate and cover infront on surface or recess i/c p/f 3pin 5/6 amp modular socket outlet 5/6 amp modular switch connection painting etc as regd. |
| 259 | Wiring for circuit/sub-main wiring along with earth wire with the (following size of ) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc. as reqd. |
| 260 | 2) 2x1.5mm² +1x1.5mm² Earthwire |
| 261 | 3)2x4mm²+1x4mm² Earthwire |
| 262 | 5)2x10mm²+1x10mm²Earthwire |
| 263 | S/F (following way) single pole and neutral, sheet steel MCCB DB 240v on surface/recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connection, phosphatised and power painted including earthing etc. as required (but without MCB/RCCB/isolator) (1) 2 + 4way |
| 264 | S/F 5amp to 32 amp rating 230V “B” series for lighting and other purposes, load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as required. (2) Single pole and neutral |
| 265 | S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. |
| 266 | (1) 40 Amp |
| 267 | (2)63 Amp |
| 268 | P/F (following capacity TP&N) dis-connector fuse switch unit inside the exiting cubicle panel board with I.S.I mark HRC fuses i/c drilling holes in the cubicle panel board making connection as regd. (3) 400 Amp TP&N |
| 269 | P/F 400Amp TPN stand ground on load on load change own switch (compact design) 415/500v including connection to as required. |
| 270 | (5.04) S/F Busbar chamber with 4 strips copper busbar of length 900mm suitable for 400 amp capacity complete with all accessoriesi/c connection earthing them body as required |
| 271 | S/F 48” sweep (1200mm)a.c ceiling fan complete with down rod, canopy, 3 Blades but without regulator etc. as reqd. (Havells or similar 5 star) |
| 272 | S/F stepped type electronic fan regulator on the modular plate switch box i/c connection but excluding modular plate as reqd. |
| 273 | 305mm sweep exhaust fan complete with all accessories connection etc as required |
| 274 | (8.52) S/F recess mounting LED down lighteras reqd. |
| 275 | S/F brass batten holder i/c connection etc. as reqd. |
| 276 | LED white lamp 18w |
| 277 | p/f lighting conductor finial made of 25mm dia 300mm long copper tube having single prong at top with 85mm dia 3mm thick copper plate i/c holes etc. Complete as reqd |
| 278 | p/f copper tape in horizontal run p/f copper tape 2ommx3mm thick on parapet or surface of wall for lightning conductor as reqd(for horizontal run) |
| 279 | p/f copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as reqd(for vertical run) |
| 280 | Earthing with copper earth plate 600 mmx 600mmx6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd. |
| 281 | Extra for using Salt & Charcoal for copper plate with electrode as reqd. |
| 282 | Earth connection from earth electrod with 4mm dia in 15mm GI pipe as required |
| 283 | (18) 9m long steel tubuler pole (410 SP-14) |
| 284 | (1.7) wiring for circuit/ submain wiring along with earth wire with the (following size of) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc as reqd. 3)2x4mm²+1x4mm² Earthwire |
| 285 | (6.01)Laying of 1 no pvc insulated pvc sheated power cable of 1.1KV grade of size not less than 25 sqmm direct in groundi/c excavation , sand cushioning , protective covering and refilling the trench etc as reqd. (3) S/F2.5 m long G.I bracket for fixing street lamp |
| 286 | S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. (1) 40 Amp |
| 287 | (1.87) S/F (following way) single pole and neutral, sheet steel MCCB DB 240 v on surface /recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connnection, phosphatised and power painted including earthing etc, as required ( but without MCB/RCCB/ isolator) (1) 2 + 4 way |
| 288 | (1.107) S/F 5amp to 32 amp rating 230 V \"B\" series for lighting and other purposes, load of (following poles)in the existing MCB DB complete with connection, testing and commissioning etc as required. Single pole and neutral |
| 289 | S/F 50 W LED street lamp . |
| 290 | SH: LAND DEVELOPMENT |
| 291 | Excavation in Soil with Dozer with lead upto 1000 meters (Excavation for roadway in ordinary rock by deploying a dozer, including cutting and transporting the earth to site of embankment/ dumping area with lead upto 1000 meters, trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.) |
| 292 | Construction of embankment with material obtained from borrow pits (Construction of embankment with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) |
AI Tender Summary
Tender Timeline
Feb 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Feb 10, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender