|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts ofsoil (including mixed soil but excluding laterite or sandstone) includingremoving, spreading or stacking the spoils within a lead of 75 m. asdirected. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom, bailing out water asrequired complete.(a) Depth of excavation not exceeding 1,500 mm, |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, inlayers not exceeding 150 mm. including watering and ramming etc. layerby layer complete.(a) With earth obtained from excavation of foundation |
| 3 | Filling in foundation or plinth by fine sand in layers not exceeding 150mm. as directed and consolidating same by thorough saturation withwater ramming complete, including the cost of supply of fine sand.(Payment to be made on measurement of finished quantity). |
| 4 | Single brick flat soling of picked jhama bricks including ramming anddressing bed to proper level and filling joints with powdered earth orlocal sand.i) In Ground Floor |
| 5 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proofcourse or below flooring or roof terracing or in foundation or in foundation trenches.i) In Ground Floor |
| 6 | Cement concrete with graded stone ballast (40 mm. size) excludingshutterinq.(a) 6:3:1 proportion(A) In Ground floorWith N.B. Variety Stone metal |
| 7 | Ordinary Cement Concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement, If any, in groundfloor. as per relevant JS codes.(a) Pakur Variety. |
| 8 | 25 mm. thick damp proof with cement concrete (1 :1.5:3) (with gradedstone aggregate 10 mm. normal size) and painting the top surface with acoat of bitumen [VG.40] using 1. 7 kg. per sq.m. including heating thebitumen and cost and carriage of all materials complete. [ Bitumen! tobe supplied by the Agency] |
| 9 | Controlled Cement concrete with well graded stone chips (20mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS :456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge.Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula.(i) Pakur Variety(b) M 25 GradeIn ground Floor and Foundation (using concrete mixture) |
| 10 | Ordinary Cement concrete (mixl:1.5:3) withgraded stonechips (20 mm nominal size) excluding shuttering andreinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety |
| 11 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m (I l)JSW/JSPUSHYAM/SRMB/BMASUELECTROSTEEL/SSL |
| 12 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge. |
| 13 | (c) Steelshuttering or9 to 12 mm thick approved quaIity ply board shuttering in any concrete work |
| 14 | Brick work with 1st class bricks in cement mortar (6: 1)(a) In foundation and plinth |
| 15 | Brick work with 1st class bricks in cement mortar (6: 1)(b) In superstructurei) Ground floor |
| 16 | A) 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in |
| 17 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors tomatch with the existing work & 4 nos. of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement@ 2.91 Kg/ Sq.m. & joint filling using white cement slurry@ 0.20 Kg/ Sq.m.(a) Area of each tile upto 0.09 Sq.m.(i) Coloured decorativein G.F |
| 18 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors tomatch with the existing work & 4 nos. of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B)WallWith Sand Cement Mortar (1 :3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement@ 2.91 Kg/Sq.m & joint filling using white cement slurry@ 0.20kg/Sq.m.(b) Area of each tile above 0.09 Sq.m(i) Coloured decorativein G.F. |
| 19 | Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of allmaterials, labours, scaffolding, staging ,curing and roughening of concrete surface complete.[Using cement slurry at back side of tiles@ 4.4 kg/sq.m &white cement slurry for joint filling @ 1.8 kg/sq.m]Area of each slab upto 0.2 Sq.m |
| 20 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick(avg) cement mortar (1:4) in floor, stair & lobby includingpointing in cement slurry with admixture of pigment matchingthe stone shade, including grinding & polishing as perdirection of Engineer - in - charge to match with the existingwork. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0kg/Sq.m] |
| 21 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.. (i) 66mm x 90mm |
| 22 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.In ground floor.(i) 32 mm thick |
| 23 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(c) 40mm X 6mm, 125mm Length |
| 24 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI 140 mark.(vii) 100mm. X 58mm. X 1.90mm. |
| 25 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI 140 mark.(iv) 75mm. X 47mm. X 1.70mm. |
| 26 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification{I.S. 2681/66} fitted and fixed complete.(iv) 300 mm long x 19 mm dia bolt |
| 27 | Anodised aluminium barrel/ tower/ socket bolt (full covered) ofapproved manufactured from extruded section conforming toI.S. 204/74 fitted and fixed with cadmium plated screws:(iv) 150mm long x 10mm dia. bolt. |
| 28 | Anodised aluminium 0-type handle of approved qualitymanufactured from extruded section conforming to I.S.specification (I.S. 230/72) fitted and fixed complete.a) With continuous plate base hexagonal/round rod.(vi) 150 mm grip x 10 mm dia. Rod |
| 29 | {A} lron door ringof approvedquality fitted and fixedwithnut andwashercomplete.(i) 50mm dia. |
| 30 | (a) M.S.or W.J. Ornamental grill of approved design joints continuously welded with M.S, W.1. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(ii) Grill weighing above 16 Kg./sq.mtr and above |
| 31 | Labour for Chipping of concrete surface before taking up Plasteringwork. |
| 32 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar includingrounding off or chamfering corners as directed and raking out joints orrougening of concrete surface, including throating, nosing and drip coursewhere necessary (ground floor)(i) With 1:6 cement mortar(b) 20 mm. thick plaster (lntemal) |
| 33 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar includingrounding off or chamfering corners as directed and raking out joints orrougening of concrete surface, including throating, nosing and drip coursewhere necessary (ground floor)(i) With 1:6 cement mortar(c) 15 mm. thick plaster.Ground Floor |
| 34 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar includingrounding off or chamfering corners as directed and raking out joints orrougening of concrete surface, including throating, nosing and drip coursewhere necessary (ground floor)(ii) With 1 :4 cement mortar(c) 10 mm thick plaster.In Ground floor |
| 35 | Neat cement punning about 1.5 mm. thick in wall dado, window, sills, floor, drain etc.i) In Ground Floor |
| 36 | Applying Interior grade Acrylic Primer of approved quality and brandonplastered or cencrete surface old or new surface to receiveDistemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer\"s specificationand as per direction of the Engineer-in-Charge.(b)two Coat (i) Water based Interior grade Acrylic Primer i) In Ground Floor |
| 37 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coatsi) In Ground Floor |
| 38 | Applying Exterior grade Acrylic primer of approved quality and brand onplastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EiC.(b) two Coat.i) In Ground floor |
| 39 | Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EiC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Two Coatb) Premium 100% Acrylic Emulsioni) In Ground floor |
| 40 | (b) Priming one coat on steel or other metal surface with synthetic oild bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 41 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(b) On steel or other metal surface :With super gloss (hi-gloss)(iv) Two coats (with any shade except white) |
| 42 | M.S. structural works in roof trusses with tubular sectionsconforming to IS: 806-1968 & IS: 1161- 1998 cnnected to oneanother with bracket, gusset cleats as per design, direction ofEngineer-in-charge complete including cutting to requisite size,fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brandconforming to IS:814- 2004, haulage, hoisting and erection allcomplete.The rate includes the cost of rolled steel section, consumables suchas electrodes, gas and hire charge of all tools and plants and labourreqired for the work including all incidental chages such aselectricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structuraltubular memebrs as specified in relevent IS code in finished work.Payment for gusset, bracket, cleat may be made by adding the actualweight of such items with weight of finished structural members. Therates are considered for a height of erection 8 m. / 2nd floor levelfrom the ground. Add 1.5 % extra over the rate for each additionalfloor or 4m. beyond the initial 8 m. or part thereof.i) For trusses spanning up to 12.00 m |
| 43 | Holding down bolt with nut including 100 x 100 x 6 mmplate washer at bottom fitted complete and packing the hole withcement concrete or cement grout as directed. (iii) 25 mm dia(b) 450 mm long |
| 44 | Galvanised corrugated iron sheet work (excluding the supporting framework) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet andbitumen washers and putty complete with 150 mm. end lap and onecorrugation minimum side lap. {Payment to be made on area offinished work}{GCI sheet to be supplied by contractor)(i) In Roof:a) With 0.60 mm thick sheet |
| 45 | Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS:1285-1975 ;Annodized(with required film thickness and specified colour /naturaI) mattfinishedconforming to !S:1868-1983 for fabrication of composit door, sliding &casement windows, partitions, formed of basic sections of any ISimbossed/certified make and brand as per direction of Engineer-In Charge.(Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing filmI) Natural whitea) 2- track sliding windowi) Bottom frame |
| 46 | Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS:1285-1975 ;Annodized(with required film thickness and specified colour /naturaI) mattfinishedconforming to !S:1868-1983 for fabrication of composit door, sliding &casement windows, partitions, formed of basic sections of any ISimbossed/certified make and brand as per direction of Engineer-In Charge.(Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing filmI) Natural whitea) 2- track sliding window\"ii) Top and side frame. |
| 47 | d) Shutter for all track sliding window.i) Bottom & Top member |
| 48 | d) Shutter for all track sliding window.ii) Style side member. |
| 49 | Supplying PVC rollers for sliding windows as per direction ofEngineer in charge. |
| 50 | Supplying EPDM gusket of approved make and brand as per direction ofEngineer in charge.i) For sliding windowsa) \"T\" shaped EPDM gasket for frames. |
| 51 | Supplying EPDM gusket of approved make and brand as per direction ofEngineer in charge.i) For sliding windowsb) \"U\" shaped EPDM gasket for frames. |
| 52 | Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987.ii) 4mm thick coloured/ tinted/ smoke glass. |
| 53 | Supplying maruti lock (100mm) Pair |
| 54 | Sanitary & Plumbing Works:Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part \" I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of paintingwithapproved paint in any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayrnent will be made for accesories,specials. Payment for painting willbe made seperately)(a) For Exnnsed WorkPVC Pipes15 mm |
| 55 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part \" I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of paintingwithapproved paint in any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayrnent will be made for accesories,specials. Payment for painting willbe made seperately)(a) For Exnnsed WorkPVC Pipes20 mm |
| 56 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part \" I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of paintingwithapproved paint in any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayrnent will be made for accesories,specials. Payment for painting willbe made seperately)(a) For Exnnsed WorkPVC Pipes25 mm |
| 57 | Supplying, fitting and fixing Feet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing LS.I. marking with fittings (tested to 21 kg per sq. cm.).(vii) 25 mm dia |
| 58 | Supplying, fitting and fixing bib cock or stop cock.(e) PTMT {Polytetra Bib Cock/ Stop Cock( Prayag or equivalent) 15 mm |
| 59 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting 3 each 1015.00 3045.00 to bracket etc. |
| 60 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia\", approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm longapproved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good alI damages and painting the brackets with two coats of approved paint.(ii) 550 mm X 400 mm size |
| 61 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long |
| 62 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter length(b) With lead caulked joints.(ii) 110 nun dia. (internal) |
| 63 | Supplying, fitting & fixing Aluminium domical grating.(iii) 100 mm |
| 64 | Supplying, fitting and fixing Shallow water closet Indian pattern (J.P.W.C.)of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing). (ii) 510 mm long |
| 65 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of \"approved make complete in position with necessary bolts, nuts etc. (a) With \"P\" trap |
| 66 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS: 13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. |
| 67 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS: 13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.B) UPVC Fittings:c) Bend 87.5 degree(ii) 110 mm. Dia. |
| 68 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS: 13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.B) UPVC Fittings:d) Shoe(ii) 110 mm. Dia. |
| 69 | Supplying, fitting and fixing Squating plate with integral flushing in whitevitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm |
| 70 | Supplying,fitting and fixing approved brand 32 nun dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long |
| 71 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe |
| 72 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 nun X 450 mm |
| 73 | Supplying, fitting and fixing soap holder.(a) PTMT (Prayag or equivalent) |
| 74 | Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass(ii) 25 mm dia. and 600 mm long |
| 75 | Supplying, fitting and fixing Foot rest for water closet of size 275 nun X 125 mm with(a) Artificial stone (4:2:1) with 6 mm stone chips and chequered includingadding colour as necessary |
| 76 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C.(i) Plastic (hallow type) black |
| 77 | UPVC PipeB. Fittingxxiii) 110/110 S Trap 75 mm |
| 78 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer(d) 2000 litre capacity |
| 79 | Labour for hoisting plastic water storage tank(ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 1st story from G.L. |
| 80 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork inexcavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.ii) With Bazree (N.B Variety) (Other Manufactures not specified) |
| 81 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(ii) For 20 usersii) With Bazree (N.B Variety)B (iv) (JSW/JSPL/SHYAM/ SRMB/BMASL/ELECTROSTEEL/SSL) |
| 82 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.B (iv) (JSW/JSPL/SHYAM/ SRMB/BMASL/ELECTROSTEEL/SSL) |
| 83 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length (b) 110 mm |
| 84 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length x) Bend 87.5Q |
| 85 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length xv) Vent Cowl(b) 110 mm Please Enable Macros to View BoQ information |
