|
| 1 | All below item provided by contractor (Basic Rate with Frieght & Insurance Charges to be Quoted by bidder (in. Rs.)) |
| 2 | GI Structure for Bus isolator |
| 3 | GI Structure for post insulator |
| 4 | GI Structures for above CTs |
| 5 | GI Structure for Fuse set |
| 6 | GI Structure for LA |
| 7 | Main Bus bar complete with GI Structure as per RESPO |
| 8 | Rubber Matting SLD Board, Trippal Chart Board and Substation Board |
| 9 | ACSR Panther conductor for Bus bar |
| 10 | 11 KV 3×185 mm2 outdoor jointing kit |
| 11 | 11 KV 3×185 mm2 indoor jointing kit |
| 12 | Control Cable 2×2.5 mm2 |
| 13 | Control Cable 4×2.5 mm2 |
| 14 | Earth Mat for outdoor equipment |
| 15 | Earth Mat for indoor equipment |
| 16 | Capacitor bank 1.98 MVAr |
| 17 | G I Pipe 150 mm Dia |
| 18 | Stone Pad |
| 19 | PG Clamp Dog to Dog |
| 20 | Number Plate with clamp and Nut & Bolt |
| 21 | Danger Plate with clamp and Nut & Bolt |
| 22 | Barbered Wire |
| 23 | Red Oxide Paint |
| 24 | Aluminium Paint |
| 25 | Nut Bolt and washer all sizes |
| 26 | Complete Stay 9GI Stay Rod 20x1800 mm, stay wire 7/8 SWG, 10 KG, Stay Clamp, Bolt, nut and washer with concrete grouting) |
| 27 | Holding Clamp for GI Pipe/Cable/Pole |
| 28 | Lug for ACSR Dog Conductor |
| 29 | PG Clamp (For Panther) |
| 30 | 33 KV Single T/F Control Panel |
| 31 | C.T. 200/100/1-A |
| 32 | 90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr. @ Rs. 22.10 Per Kg. |
| 33 | Erection of all below items done by contractor |
| 34 | GI Structure for Bus isolator |
| 35 | GI Structure for post insulator |
| 36 | GI Structures for above CTs |
| 37 | GI Structure for Fuse set |
| 38 | GI Structure for LA |
| 39 | Main Bus bar complete with GI Structure as per RESPO |
| 40 | Rubber Matting SLD Board, Trippal Chart Board and Substation Board |
| 41 | ACSR Panther conductor for Bus bar |
| 42 | Control Cable 2×2.5 mm2 |
| 43 | Control Cable 4×2.5 mm2 |
| 44 | Earth Mat for outdoor equipment |
| 45 | Earth Mat for indoor equipment |
| 46 | Capacitor bank 1.98 MVAr |
| 47 | G I Pipe 150 mm Dia |
| 48 | Stone Pad |
| 49 | PG Clamp Dog to Dog |
| 50 | Number Plate with clamp and Nut & Bolt |
| 51 | Danger Plate with clamp and Nut & Bolt |
| 52 | Barbered Wire |
| 53 | Red Oxide Paint |
| 54 | Aluminium Paint |
| 55 | Nut Bolt and washer all sizes |
| 56 | Complete Stay 9GI Stay Rod 20x1800 mm, stay wire 7/8 SWG, 10 KG, Stay Clamp, Bolt, nut and washer with concrete grouting) |
| 57 | Holding Clamp for GI Pipe/Cable/Pole |
| 58 | Lug for ACSR Dog Conductor |
| 59 | PG Clamp (For Panther) |
| 60 | 33 KV Single T/F Control Panel |
| 61 | C.T. 200/100/1-A |
| 62 | 90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr. @ Rs. 22.10 Per Kg. |
| 63 | All below item provided by Store Center and Carriage & Erection of all below items done by contractor |
| 64 | 11M, ST Pole - SP - 55 Galvanised |
| 65 | M S Channel 100x50 mm 2400 mm Long |
| 66 | Top Channel 125x65 mm, 3200 mm long |
| 67 | 33 KV Disc Insulator B&S Polymeric Type |
| 68 | 33 KV Disc Fitting for drop B&S type |
| 69 | Polymeric 33KV Pin Insulator |
| 70 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 71 | MS Channel 125x65 (13.1 Kg/Mtr.) For Top Channel (3.2 Mtr.Long x 2 No. = 6.4 Mtr.) |
| 72 | MS Angles 50x50x6mm (4.5 Kg/Mtr.) For bracing of B.G. One leg 2.5 Mtr.x 4 No =10 Mtr |
| 73 | 33 KV Bus Isolator |
| 74 | 33 KV post insulators |
| 75 | 33 KV VCB 800A,750 MVA |
| 76 | 33 KV Fuse Set |
| 77 | 33 KV Lightning Arrestors |
| 78 | 33/11 KV 5 MVA Transformer |
| 79 | 11 KV VCB (Incoming) 600/300/5A 350 MVA |
| 80 | 11 KV VCB (Out going) 200/100/5A 350 MVA |
| 81 | 11 KV 3×300 mm2 XLPE |
| 82 | 11 KV 3×185 mm2 XLPE |
| 83 | M.S. Angle (65×65×6)mm |
| 84 | 11 KV 3×300 mm outdoor jointing kit |
| 85 | 11 KV 3×300mm indoor jointing kit |
| 86 | Cost of Plinth & Foundation of VCB |
| 87 | Making of cable J/kit |
| 88 | Construction of plinth of size 3.46 x4.46 Mtr. For 5 MVA T/F having 0.45 Mtr. above ground level. The work also includes laying of 2 No. 3.46 mtr. long rail pieces complete with cutting, welding & proper fitting etc. The plinth will be made as per drawing and shall be plastered/ finished on top and sides of the plinth. |
| 89 | Painting of all S/S Structure as requied |
| 90 | Laying of 11 KV cable including cost of sand & Bricks |
| 91 | Shifting & Repairing of wire fencing |
| 92 | Concreting of grouting of Pole (0.268 Cu.m/pole) Please Enable Macros to View BoQ information |
