|
| 1 | Supply, installtion, testing and commissioning LT panel board, 415 Volt 3 phase, 4 wire, AC 50 Hz, cubical, indoor type, Pre-wired, floor mounted weather and vermin proof, size 1100 x 1000 x 450 fabricated out of 2.0 mm thick CRCA MS sheet and angle iron frame40x40x6 mm, with bus chamber and seperate in built sheet metal cubicles for accessaries including hinged panels opening from front,spray painted with two coat synthetic enamelpaint over a coat of red oxide primer of shade and tint as approved, suitable cable glands, thimbles for all incoming and out going cables including grouting of panel board on PCC (1:2:4) foundationusing 20 mm graded stone aggregate all as per approved drawing and as specified and directed consisting of the followingNote Drawing of the panel shall be approved by garrison engineer before placing order.4 Nos bus bar / wire high conductivity aluminium alloy, properly insulated and colour coded, 03 Nos for phases (RYB) rating 400 Amps and 01 No neutral connected with MCCB rating 250 Amps ,outging MCCBs of 160Ampsand duly supports complete all as directed.MPCB,3 pole, 63 Amps,415 VoltAC, suitable for 45 HP Motor capacity( In comer ) - 04 NoPower contactor 3 phase, 415 volt 80 Amps MNX series - 12 NosThermal over load relay suitable for 90 to 150 Amp current rating, MN 12 type- 04 no Analog / Digital timer suitable for star delta starter - 04 No Single Phase perventer, phase reversible with under voltage, over voltage preventer relay - 04 no Volt meter digital type, 3 phase AC, 96 mm square type,0- 500 Volt, including selector switch for reading on all three phases - 04 No.Ammeter digital type, 3 phase AC,96 mmsquare type0- 100 Amp with selector switch andCTs of suitable size- 04 No.Phase indicating lamp with holder 230 V AC with toggle switches / MCB - 12 Nos |
| 2 | Supply, installtion, testing and commissioning LT panel board, 415 Volt 3 phase, 4 wire, AC 50 Hz, cubical, indoor type, Pre-wired, floor mounted weather and vermin proof, size 1100 x 1000 x 450 fabricated out of 2.0 mm thick CRCA MS sheet and angle iron frame40x40x6 mm, with bus chamber and seperate in built sheet metal cubicles for accessaries including hinged panels opening from front,spray painted with two coat synthetic enamelpaint over a coat of red oxide primer of shade and tint as approved, suitable cable glands, thimbles for all incoming and out going cables including grouting of panel board on PCC (1:2:4) foundationusing 20 mm graded stone aggregate all as per approved drawing and as specified and directed consisting of the following:- Note Drawing of the panel shall be approved by garrison engineer before placing order. 4 Nos bus bar / wire high conductivity aluminium alloy, properly insulated and colour coded, 03 Nos for phases (RYB) rating 400 Amps and 01 No neutral connected with incommer MCCB 250Amps and outging MCCBs 100 Ampsand duly supports complete all as directed.MPCB,3 pole, 50 Amps,415 VoltAC, suitable for 30 HP Motor capacity - 03 NoPower contactor 3 phase, 415 volt 50 Amps MNX series - 09NosThermal over load relay suitable for 42 to 69 Amp current rating, MN 12 type- 03 no Analog / Digital timer suitable for star delta starter - 03 No Make : Single Phase perventer, phase reversible with under voltage, over voltage preventer relay - 03 no Volt meter digital type, 3 phase AC, 96 mm square type,0- 500 Volt, including selector switch for reading on all three phases - 03 No.Ammeter digital type, 3 phase AC,96 mmsquare type0- 100 Amp with selector switch andCTs of suitable size- 03 No.Phase indicating lamp with holder 230 V AC with toggle switches / MCB - 09 Nos |
| 3 | Supply, installtion, testing and commissioning LT panel board, 415 Volt 3 phase, 4 wire, AC 50 Hz, cubical, indoor type, Pre-wired, floor mounted weather and vermin proof, size 1100 x 900 x 450 fabricated out of 2.0 mm thick CRCA MS sheet and angle iron frame40x40x6 mm, with bus chamber and seperate in built sheet metal cubicles for accessaries including hinged panels opening from front,spray painted with two coat synthetic enamelpaint over a coat of red oxide primer of shade and tint as approved, suitable cable glands, thimbles for all incoming and out going cables including grouting of panel board on PCC (1:2:4) foundationusing 20 mm graded stone aggregate all as per approved drawing and as specified and directed consisting of the following:-Note Drawing of the panel shall be approved by garrison engineer before placing order.4 Nos bus bar / wire high conductivity aluminium alloy, properly insulated and colour coded, 03 Nos for phases (RYB) rating 400 Amps and 01 No neutral connected with incommer MCCB 250Amps and outging MCCBs 63 Ampsand duly supports complete all as directed.MPCB,3 pole, 32 Amps,415 VoltAC, suitable for 10-15 HP Motor capacity - 03 NoPower contactor 3 phase, 415 volt 25 Amps MNX series - 09 NosThermal over load relay suitable for 20 to 33 Amp current rating, MN 12 type- 03 no Single Phase perventer, phase reversible with under voltage, over voltage preventer relay - 01 no Volt meter digital type, 3 phase AC, 96 mm square type,0- 500 Volt, including selector switch for reading on all three phases - 03 No.Ammeter digital type, 3 phase AC,96 mmsquare type0- 100 Amp with selector switch andCTs of suitable size- 03 No.Phase indicating lamp with holder 230 V AC with toggle switches / MCB - 09 Nos |
| 4 | Supply, laying and testing of LT UG cable,XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes complete all as specified and directed. |
| 5 | 95sq mm 3.5 core |
| 6 | 50 sq mm 3.5 core |
| 7 | Excavating in trenches in soft soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed. |
| 8 | Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point. |
| 9 | Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each all as required and directed. |
| 10 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 11 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 65mm,with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 12 | Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purposesuitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed. |
| 13 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter).The bove arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity (Size:270 x 40 200mm) complete all as specified and directed. |
| 14 | supply and fixing Earth continuty conductor or main earthing lead fixed to wall on batten or recess chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other loop earthing etc. as required 25X4mm galvanised iron strip all as specified and directed. |
| 15 | Supply, Install, commissioning & testing for Centrifugal pump set, electric driven 415 V, Three phase suitable for 150/200/250 mm dia bore/open well of 40 HP Pump motor set RPM 2900, Head Max 60 mtrs, flow rate 150 m3/hrs, 50Hz, material : casting iron casing, stainless steel shaft approx impeller size dia max 370mm, minimun 295mm, single stage, side inlet including RCC foundation as per manufacturer instructions including orientation / Addition / alteration including CI flanged ends double rubber seat ball type foot valve 150mm dia complete all as specified and directed.. Note : Motor and pump shall be of same make. |
| 16 | M&L in replacement 150 mm dia non return (reflux) valve with Gun Metal working parts cast iron body including jointing material complete all as specified and directed. |
| 17 | Supply & Fix / Lowering PVC insulated and PVC sheathed flexible, flat, nominal size 10 Sqmm, 3 core1100 volts grade, ISI Marked three core, stranded copper conductor cable complete all as specified and directed. |
| 18 | Supply & Fix / Lowering PVC insulated and PVC sheathed flexible, flat, nominal size 16 Sqmm, 3 core1100 volts grade, ISI Marked three core, stranded copper conductor cable complete all as specified and directed. |
| 19 | Supply & Fix / Lowering PVC insulated and PVC sheathed flexible, flat, nominal size 25 Sqmm, 3 core1100 volts grade, ISI Marked three core, stranded copper conductor cable complete all as specified and directed. |
| 20 | Supply & installed Star Delta Starter( fully automatic star delta) including with Power Contactor\"s, Relay, (for over load protection, high voltage protection,Low voltage protection, Phase reverseable protection, single phase preventer & Phase Changer protaction) & timer complete in Factory built Sheet Metal enclosure suitable for 30 HP Submersible pump complete all as specified and directed. |
| 21 | Supply and install commissioning and testing non clog submersible pump of 12.5 Hp sewage pumpset electric driven 415 volts.108m3/hr head 18 mtr Cl casing pump ,impeller CI,shaft CI,415 volts ,50Hz,440 RPM protection IP68 suitable for raw sewage with 5 mtr lifting chain inclusive suitable connectingcable and testing(as per existing cable) all as specified and directed. |
| 22 | Supply and fixCentrifugal type monoblock pump set suitable for 415 V, 3 Phase system having capacity 12.5 HP., 1450 RPM Three Phase foot mounted IE2 motor mounted on a base frame total head 19 mtr, discharge capacity 28 L/S including all fixing arrangement like cutting and welding of pipe, fixing of tee/ bend and providing angle iron base for pumpset of sutiable size complete all as specified and directed.Note : (i) The rate quoted is including Taking out motor & pump keep safe custody and deposit in MES store.(ii)The rate quoted is including of removing unserviceable submerable pump set from site and deposit in E/M store yard.(iii)The rate quoted is including suitable size of Angle iron base/Clamp all as directed . |
| 23 | M & L for provision of charts/poster/diagrams/Name plate made out of paper sheet 2 mm thick cut to size and shapewith colour backgroung mounted on angle iron square /tube frame work size 2500mmX600mmX40mm illuminated with LED lighting inside the box and writting diagrams and letters including fixing arrangements with screw/adhesive as required complete all as specified and directed |
| 24 | M&L for Spray Painting of pumps,motors, LT panelspainting of external/exposed delivery pipes/section/valves/Boards of coplete pump house,with two coat offirst quality synthetic enamel paint over existing surface including preparation of surface in any width/girth to match with the existing colour code complete all as specified and directed. |
| 25 | M&L for making Flow chart diagram of size 1 mtr X1 mtr for pump houses indicating no of pump installed , sumps, OHR ,suction ,rising main ,delivery lines made with the help of computer graphics and pasted on 3mm thick acrylic sheet duly framed in transparent acrylic sheet including SS nuts,bolts and washers and fixing at different pump houses complete all as specified and directed. |
| 26 | S&F Centrifugal pump(only) of capacity 30Hp,three phase .415 V, Head Max 60 mtrs, flow rate 150 m3/hrs, 50Hz, material : casting iron casing, stainless steel shaft approx impeller size dia max 370mm suitable for connecting/align with existing electric motor and testing up to satisfaction of engineer-in -charge complete all as specified and directed.Note (i)The rate quoted is including of removing unserviceable submerable pumpfrom site and deposit in E/M store yard.(ii)The rate quoted is including suitable size of Angle iron base/Clamp all as directed . |
| 27 | Supply & Fix / lowering of Power driven Submersible pump set of capacity 30 HP suitable for 130 mtr head 1000 LPM, water cooling type complete with elctric motor of suitable sizeall as per manufacturer’s design including Supply & Making all fixing arrangement as per site requirement like NRV,flat iron clamp upto 10 to 12 mm thick, icluding making reducer as per pump dia and flange of suitable size and making electrical connection with jointing material complete all as specified and directed.Note : (i) The rate quoted is including Taking out motor & pump keep safe custody and deposit in MES store.(ii)The rate quoted is including of removing unserviceable submerable pump set from site and deposit in E/M store yard.(iii)The rate quoted is including suitable size of Angle iron base/Clamp assembly as directed. |
| 28 | S&F safty rope 4 mm dia GI wire with pvc cover for hanging of pump assembly complete all as specified and directed. |
