Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for preparation(complete removal of existing treatment) of old decorated external Roof sheet/wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint ( Camouflage Pattern) over priming coat premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engr-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 2 | M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible , filling of holes and cracks with with suitable material like cement or plaster of paris etcand thereafter applying two coat of oil bound distemper over a coat of primer on walls/ceiling including applying 1-2mm thick wall care putty over disturbed surface complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 3 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed.Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 4 | M&L for preparation of old surfaces of walls by washing rubbing down and stopping of surface and applying one coats of cement base paint complete all as specified and directed. |
| 5 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified . |
| 6 | M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girthand applying one coat of synthetic enamel paintcomplete all as specified . |
| 7 | M&L for preparation of old painted concrete surface plain/kerb stone moulded over 10cm width or girth by cleaning, brushing etc and applying one coat of synthetic enamel paintall as specified and as directed. |
| 8 | Taking down cement plaster or cement lime plasteron brick,concrete or stone surfacesincluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified |
| 9 | M&Lfor 5 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceiling includingfinishingthe surface even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M&L for 10 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls includingfinished thesurface even and smooth without using extra cement complete all as specified and as directed. |
| 11 | M&L for 15 mm thick plaster in cement mortar (1:4) on brick or concrete surfaces includingfinished the surfaces even and smooth (without using extra cement) complete all as specified and as directed. |
| 12 | M&L for preparation ofnewly plastered surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified. |
| 13 | M&L for preparation ofnewly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified |
| 14 | M&L for preparation ofnewly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified |
| 15 | M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified. |
| 16 | M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified. |
| 17 | Dismantling of boarding of any description, fixed in any position with nails |
| 18 | S&F 18 mm thick Rajshri WPC celluka ply of plain colour fixed with screws solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as specified and directed. Make :- Rajshri Plastiwood orEquivalent |
| 19 | S&F 18 mm thick Rajshri WPC celluka ply of one side Prelam/Rigidlam and other side balancing laminate colour to make Kitchen cabinet shutter/drawer front shutters complete all as specified and directed. Make :- Rajshri Plastiwood or Equivalent |
| 20 | S&F 12 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sidescomplete all as specified and directed. Make :- Rajshri Plastiwood or Equivalent |
| 21 | S&F in repair of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified anddirected. (Make : Hettich, Ebco, Prime or equivalent) |
| 22 | S&F in repair stainless steel handle 100mm size of kitchen cabinet/ cupboard shutters complete all as specified anddirected (Make : Hettich, Ebco, Prime or equivalent) |
| 23 | Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified. |
| 24 | M & L forhard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface. |
| 25 | M & L 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base including use of necessary form work. |
| 26 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) asin sub base of flooing etc complete all as specified. |
| 27 | M&L Non-skid coloured Endura outdoor tiles 18-20 mm thick (Square/rectangular) of each tile exc 0.06 Sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slury and pointed in coloured cement and pigment to match the tiles complete all as specified and as directed. |
| 28 | S&F in for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Gradecomplete all as specified and directed. |
| 29 | M&L for Sand (M Sand) filling under interlocking tiles or in foundations, spread and levelled including watering and consolidation complete. |
| 30 | M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified. |
| 31 | S&F in repair steel rolling shutter of thickness 1.25 mm without ball bearing as specified including top cover , anchoring rod , hasp and stapleand one shop coat of primer erected in position, gear operated type with bevel gear box and crank handle complete all as specified. |
| 32 | Taking down wall panelling and similar work all as specified. |
| 33 | S&Ffor solid colour wood grain printed PVC sheets 5mm thickas in wall panelling inclusive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall as per specification and drawing. |
| 34 | M&L for removal of blockage in sewage line between manholes of various sizes by any means by using Kambore NM-01 NoKamgarb 5 Ltr 01 No, Kambore 1075 up-01 Nos Retriever 150 including removing Rugs of any type, dirt etc complete upto the entire satisfaction of Engr-in-Charge. Note :(i) The rates quoted in the above item includes cost ofT&P like Kambore NM-01 NoKamgarb 5 Ltr 01 No & Retriever 150 etc complete. (ii) The lines measured once can not measured again within three months, if block in the same lines re-occure with in three months the contractor has to remove the blockage andshall not be paid extra for this (iii) Minimum two persons shall be deployed by contractor and they shall be present on all working days for attending the complaints of Sewage. The complaints shall be detailed by JE/AGE concerned. In case of non attending of complaints within 20 hours except on holidays, the recovery @ Rs 100/- per complaint shall be made from contractors dues.(iv) All the above machineries shall be procured and shall be deposited in complaint cell of AGE B&R AF Rajokri within 20 days on commencement of the work |
| 35 | M&L for removal ofblockage of soil/waste pipes WC, WHB,Bottle Trap, Floor Trap etcrunning on external wall of buildings, complete all as specified and directed |
| 36 | Cleaning of manhole upto 1 m depth and removal of sludge silt/liquid/mud/sand/water etc in foul position to outside the MoD land complete all as specified and directed |
| 37 | All as per item No 36 here-in-before but exceeding 1m and not exceeding 2m in depth. |
| 38 | All as per item No 36 here-in-before but exceeding 2m and not exceeding 3 m in depth. |
| 39 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth andnot exceeding 10 Sqm on plan and not exceeding 1.50 m in depthfor manholes ,well etc and getting out in soft/loose soil, complete all as specified and directed |
| 40 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.. |
| 41 | Removing excavated materials to a distance exceeding 1.5 KM but not exceeding 5 KM and depositing where directed in soft/loose soil, complete all as specified. |
| 42 | Demolition & breaking up drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar including bed concrete internal dia of pipe 150mm and removal of demolished materail out of MoD land complete all as specified. |
| 43 | Material and Labour for concrete bed to 150 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested. |
| 44 | Material and Labour for 150 mm internal dia reinforced cement concrete pipes drain pipesclass NP-3 laid in trenches and jointed complete all as specified.. |
| 45 | Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc as specified and directed. |
| 46 | S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed totrenches or in floors complete all as specified and as directed |
| 47 | S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and as directed |
| 48 | Supply and Fixing in repairs, PVC (SWR) bends, 110mm dia fixed to PVC pipes complete all as specified and directed |
| 49 | Supply and Fixing 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and as directed |
| 50 | Supply and Fixing in repairs, PVC (SWR) bends, 75 mm dia fixed to PVC pipes complete all as specified and directed |
| 51 | Dismantling of MS/CI pipe including fittings of any description, any dia, all as specified and as directed |
| 52 | Supply and Fixing for cast iron, sand cast, soil, waste & vent pipes, 100mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and as directed by Engr-in-Charge. |
| 53 | Supply and Fixing for cast iron, sand cast soil waste & vent pipes 75mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and as directed |
| 54 | Supply and Fixing CI branch piece single/Tee etc (equal or unequal) ordinary or invented (spigot or socket type) or with parallel branches, bore of pipe 100mm all as specified |
| 55 | Supply and Fixing cast iron branch piece/Tee etc 75mm bore size with oval access door single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed |
| 56 | Supply and Fixing cast iron bends any radius, diminishing pieces or tapers 100mm bore size complete all as specified and as directed |
| 57 | All as per Srl item No 56 here-in-before but for 75 mm bore. |
| 58 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed. |
| 59 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed. |
| 60 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 61 | Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 62 | Supply only Chain link MS galvanisd fencing, any size or type |
| 63 | Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and directed. (each row shall be measured separately) |
| 64 | S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 65 | S&F in repair re-inforced punched concertina coil of 900 mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified. |
| 66 | S&F in repair re-inforced punched concertina coil of 600 mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified. |
| 67 | Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed . |
| 68 | M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed |
| 69 | M&L for rendering 15mm thick in CM 1:4 with water proofing compounding @3% by wt of cement on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified.Note: WPC shall be measured and paid seperately. |
| 70 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified. |
| 71 | Supply onlyintegral Water Proofing compound complete all as directed. |
| 72 | Supply and Fixing in repairs, SFRC manhole cover of size 600mm x 600mm x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame :(a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame |
| 73 | Supply and Fixing in repairs, SFRC cover slabs of size 450mm x 450mm x 40mm thick with frame set in cement mortar 1:4 complete all as specified and as directed Notes-(i) Make of SFRC Manhole/drain cover and frame :(a) M/s PS Concrete (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame |
| 74 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serveable tiles to stores and and rubbish off the premises complete all as specified and directed.. |
| 75 | M & L for non skid ceramic coloured tiles, 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors and scantling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and directed. |
| 76 | M & L for non skid ceramic coloured tiles, 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and directed. |
| 77 | M & L for coloured Vitrified Ceramic tiles, 9-10 mm thick ( square / rectangular ) of Light shade, polished area of each tile not exceeding 0.36 sqm, fixed in floors / skirting etc. over set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tile complete all as specified . |
| 78 | M & L Glazed Ceramic coloured tiles of size 450 x 350 x 7mm / 600 x 300 x 7mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles completeball as specified . |
| 79 | Demolition of stone slab and tiles of any description or thickness in floors/walls, apron etc laid bedded and pointed in any mortor. |
| 80 | M&L 20-25mm thick machine cut Kota stone slab as inflooring, steps of stair (treads),over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete all as specified and directed. |
| 81 | M&L 20-25mm thick machine cut Kota stone slab as inskirting/dado, riser of steps,laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete all as specified and directed. |
| 82 | M&L 18-20mm thick Granite tile machine cut, bedded and jointed with grey cement slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including grinding & polishing slab over screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) laid complete all as specified. |
| 83 | M&L for screed bed or bedding layer of 15mm thick in cement mortar (1:6) for bedding of tiles complete all as specified. |
| 84 | M&L for 10mm thick rendering in cement mortar (1:4) on vertical surface for backing of tiles etc complete all as specified. |
| 85 | M&L for screed bed or bedding layer of 20mm thick in cement mortar (1:6) for bedding of tiles complete all as specified. |
| 86 | M&L for 15mm thick rendering in cement mortar (1:4) on vertical surface for backing of tiles etc complete all as specified. |
| 87 | M&L for 25mm thick plain cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in sub base all as specified and directed. |
| 88 | M&L for 40mm thick plain cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in sub base all as specified and directed. |
| 89 | Taking down shutter of any description not exc 1 Sqmeach from chowkhat complete all as specified. |
| 90 | Taking down shutter of any description exc 1 Sqmbut and n exc 2 Sqm each from chowkhat all as specified. |
| 91 | Taking downchowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 92 | Taking downchowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each and making good the distrubed surface in CM 1:4 & finished with similar specification as exists complete all as specified. |
| 93 | S&F Pressed steel frames of size 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc with and including back filling with PCC (1:3:6) type C-0 complete as specified. |
| 94 | S&F Pressed steel frames of size 125X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc with and including back filling with PCC (1:3:6) type C-0 complete as specified. |
| 95 | S&F 35mm thick Second class hard wood Glazed and skeleton shutter Factory made, open rebated and prepared to receive glass, gauze etc, divided into squares with plain, chamfered of rounded, mitred and reveated sash bars any number prepared to receive glass/gaused etc. for window and ventilators etc are provided with stiles and rails as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specfied and directed. |
| 96 | S&F Flush shutter 30mm thick factory made, solid core construction with block board core and plywood face pannel commercial type on both sides complete all as specified.and directed. |
| 97 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail& bootom rail; paneling of single side prelaminated PVC sheet to befitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification.complete all as specified and directed. |
| 98 | S&F solidPVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet & reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 99 | S&F powder coated aluminium frame for partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 100 | S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm longhinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified. |
| 101 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 102 | S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 103 | M&L for PCC (1:3:6) type C1 (using 20mm graded stoneaggregates) as in padding, coping, bed plates, hold fast blocks etc including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and irected.. |
| 104 | M&L for cement concrete 1:3:6 type C-1 1:3:6(using 20 mm graded stone aggregate) as in filling of pressed steel door frame and hold fast blocks etc all as specified and directed.. |
| 105 | S&F Mild steel butt hinges medium weight, cold rolled, 100mm ISI marked complete all as specifed. |
| 106 | S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified. |
| 107 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified. |
| 108 | S&F 150 mm size aluminium handle fabricated, \"D\" type anodised ISI marked complete all as specified. |
| 109 | S&F in repairs 200mm long aluminium anodised, barrel tower bolts of extruded section. |
| 110 | S&F in repairs 250 mm long aluminium alloyanodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed. |
| 111 | S&F in repairs 150mm long, Aluminium anodised Floor door stopper alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 112 | S & F in repairs mild steel, 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 113 | S&F in repairs door seal bottom with aluminium plate and rubber insulation 42\"\" x 1.5\"\" complete all as specified. |
| 114 | S&F in repairs aluminium (Die cast), body door closer, hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & as directed. |
| 115 | Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. |
| 116 | Dismantling of wrought iron or mild steel work of any description in any poistion not otherwise specifically provided for all as specified. |
| 117 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks, grilll to balconies fixed to RCC/brick walls and similar works of Gde E-165(Fe 290) including welding etc. complete all as specified & as directed. |
| 118 | S&F Steel work as in tubular, rafters, oppurlines, posts and similar works (round/square/rectangular shape of pipes as approved by Engineer-in-charge)trussesof semi circle/curved shape upto height 6 mtr including post special shapedwasher etc. complete incl necessary nut bolts wind tie and gusset plates etc usingERW or induction butt weldedtubes conforming to I. S.1161-1979 grade St.-240 complete all as specified. |
| 119 | S&F Rolled Mild steel Plates (plain or chequered) channels,squarecutor notched (ordinaryand countersunk) forming holes, without any attachmentconfirming to Fe-410-S complete all as specified. |
| 120 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed. |
| 121 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed. |
| 122 | S&F in repair false ceiling with exposed GI system using \"SILHOUETTE XL 15mm (Nominal) designer Grid \"Armstrong\" white or Global white with back reveal and 600 x 600 x 15mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette), Making necessary framework for AC ducting, if any and necessary cutouts for diffuser and light fittings, taping and finishing to proper line & level and incl dismantling old unservicable false ceiling complete all as per manufacturer\"s instructions and as directed. |
| 123 | Dismantling/removing old damaged worn out APP of any thickness incl screed bed or plastering of any thickness and removing the rubbish materials outisde MD land at a dumping place earmarked by any state govt/municipalties ect any distance complete. |
| 124 | M&L for 40mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding, sub base of floor, coping complete all as specified & as directed. |
| 125 | M&L for 15 mm thick screed bed in cement mortar (1:4) mixed with water proofing compound as per manufacturer\"s instruction @ 3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.Notes : WPC shall be measured and paid seperately. |
| 126 | Material and labour, water proofing tratment of roof consisting as under :-(a)Applying a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per Sqm over a coat of primer @ 0.30 litre / Sqm including preparation of roof surfaces.(b)A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 Kg/Sqm, reinforced with polyester non-woven fabric (weight not less than 160 gm/sqm) duly sealed at over laps & joints with flame (by torch appliction) all as per manufacturer\"s instruction complete all as specified and directed. |
| 127 | M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed in neat cement slurry in floor and cut and polished, set with grey cement and pigment over 15mm thick cement screed bed in cement mortar 1:4 complete all as specified as directed. |
| 128 | M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 129 | M&L for prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified |
| 130 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 131 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 132 | S&F for 4.8/5.0mm thick sheet glass ordinary quality and glazing each pane not exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame complete all as specified . |
| 133 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. complete all as specified. |
| 134 | Taking up or down steel tubing 20mm bore and connection including cleaning for refixing or removal to store. complete all as specified. |
| 135 | S&F 15 mm dia GI tubes medium grade, galvanisedwith all fittings such as sockets, bends, elbows, Tees etc concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 136 | S&F 20 mm dia GI tubes medium grade, galvanisedwith all fittings such as sockets, bends, elbows, Tees etc concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 137 | Cutting chases, pinning in brick walls, making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthin brick wall etc complete all as specified. |
| 138 | Disconnecting existing PVC water tank of capacity exc. 250 ltr but not exc. 500 ltr, setting aside for lowering down if required for repairs,hoisting if required reconnecting and refixing in position on roof including cleaning of Overhead tank & removing the sludge washing down with detergent/ bleaching powder and writing the dates of cleaning with suitable paint complete all as specified. |
| 139 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified. |
| 140 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified. |
| 141 | S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as per SSR Part I complete all as specified. |
| 142 | S&F for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as per SSR Part I complete all as specified. |
| 143 | S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified. |
| 144 | S&F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified. |
| 145 | S&F in repair 1st quality Vitreous China pedestal pattern wash basin, white, flat back of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including 32mm dia PVC waste pipe with connector including cutting for and pinning in ends of brackets completeall as specified and directed. |
| 146 | S&F in repair 1st quality Vitreous China wash basin, white, flat back of size 550x400mmPVC connction suitable for hotand cold water, bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipes & wall flange and fixing brackets/bolts including cutting and pinning in ends of brackets completeall as specified. |
| 147 | S&F in repair Vitreous china Counter top Wash hand basin (white) of size (570x420x195mm) complete all as specified.Make :- Cat Part No FLS-WHT-5601 of Jaquar or equivalent |
| 148 | S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap(excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc.complete all as specified. |
| 149 | S&F in repair vitreous China Rimless Single piece WC (White) with PP soft Close Slim Seat Cover, Hinges, Dual Flush Cistern fitting, fixing Accessories and accessories set, Size 370x690x750mm, S-Trap - 300mm complete all as specified.Make :- Cat Part No CNS-WHT-853S300SPPSM of Jaquar or equivalent |
| 150 | S&Fin repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests, including 100mm cast iron \"P\" or \"S\" trap and 100mm cast iron sanitary connection, socket to fit WC outlet,including connection to trap, to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as specified. |
| 151 | S&F in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified. |
| 152 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified. |
| 153 | S&F in repairs Health Faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 Meter Long Flexible Tube & ABS Wall Hook including making connection and fixed in position complete all as specified and as directed. |
| 154 | S&F in repair Toilet Paper holder with flat recessed type stainless steel complete all as specified. |
| 155 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified. |
| 156 | S&F in repair brass CP Wall mixer with L bend incl (provn of over head shower) , 15mm bore chromium plated fancy type for mixing hot & cold water screwed down for iron pipe complete all as specified.Make :- Cat Part No F2002401 of Cera or equivalent |
| 157 | S&F in repair single lever 3-inlet Diverter Exposed parts kit chrome finish consisting of operating Lever, Cartridge Sleeve, Wall Flange (with Seats), Button Assembly Sleeve and Button Cap, 15mm nominal bore complete.Make :- Cat Part No OPP-CHR-15193NKPM of Jaquar or equivalent |
| 158 | S&F in repair brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe, 15mm dia chromium plated fancy complete all as specfied and directed. |
| 159 | S&F in repair Centre hole basin mixer with hot or cold mounted tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe complete all as directed. |
| 160 | S&F in repair Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15mm nominal bore complete.Make :- Cat Part No ARI-CHR-39233NKof Jaquar or equivalent |
| 161 | S&F in repair 32mm dia brass chromium plated bottle trap for wash basin with inlet nd outlet screwed for pipe or connection including necessary packing union and cap and fixed complete all as specified. |
| 162 | S&F in repair angular two way angle cock with wall flange, 15mm bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for ion pipe or for unions and fixed complete all as specified. |
| 163 | S&F in repair bib tapslong body cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule complete all as specified. |
| 164 | S&F in repair 15mm Stop valves/angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for brass ferrule complete all as specified. |
| 165 | S&F in repair Soap dish ofchromium plated or stainless steel fixed to wall with chromium plated brass screws all as specfied and directed.. |
| 166 | S&F in repair 600mmx450mm size bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 167 | S&F in repairs coloured PVC toilet cabinet of size 622x422mm with looking mirror including repairing the distrubed surfaces to match with existing all as specified and directed.Make :- Prayag or equivalent |
| 168 | S&F in repair Corner glass shelf, 5mm thick glass, 9\" wide, fixed with suitable mild steel CP brackets, nuts & bolts all as specified and directed.Make :- Onida / High Life / Eagle |
| 169 | S&F in repair Brass chromoim plated, towel railof 20mm dia, D-type, 60cm long between flanges complete all as specifed and directed. |
| 170 | S&F in repairs stainless steel sinks with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers & waste; including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with and including PVC waste pipe and CP waste coupling 32mm dia and making good to disturbed surfaces complete all as specified and directed. |
| 171 | S&F75 mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber rings joints fixed to walls/trenches complete all as specified. |
| 172 | S&F in repairs 110 mm dia PVC (SWR)junction single, (Single T) equal or unequal with/without door of any radius complete all as specified. |
| 173 | S&F in repairs 75 mm dia PVC (SWR)junction single, (Single T) equal or unequal with/without door of any radius complete all as specified. |
| 174 | S&Fin repairs PVC floor trap with grating incl jointing to waste pipe of 75mm dia in and including jointing with solvent cement complete all as specified. |
| 175 | S&Fin repair chromium plated shower rose 125mm dia incl shower arm casted 190mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union complete all as specified. |
| 176 | S&F in repair PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement. |
| 177 | Net Contract Sum will be after deducting Sch of Credit of Rs 2,77,390.00 |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
