|
| 1 | Taking down old unserviceable , Supply install testingand commissioning of submersible sewage pumpset/motor non clog type of capacity 4HP/3 KWmotorincluding suitable size of suction & delivery pipe, connected valves , including necessary electrical connections from starter to motor with suitable sizecable complete all as specified and directed( AV) |
| 2 | Taking down old unserviceable , Supply install testingand commissioning of electric motor coupled with submersible sewage pumpset non clog type of capacity 15 HP motorincluding suitable size of suction & delivery pipe ,connected valves ,including necessary electrical connections from starter to motor with suitable size cable complete all as specified and directed (AV) |
| 3 | Taking down old unserviceable , Supply install test and commissioning ofcentrifugual pump,motor of capacity 5HP/3.7 KWincluding suitable size of suction & delivery pipe ,connected valves , including necessary electrical connections from starter to motor with suitable sizecable with suitable PCC foundation cable complete all as specified and directed(AV) |
| 4 | Taking down old UNSV , Supply install test and commissioning ofcentrifugual pump,motor of capacity 20HP/15 KWincluding suitable size of suction & delivery pipe , connected valves, including necessary electrical connections from starter to motor with suitable size cable cable complete all as specified and directed with suitable PCC foundation(AV) |
| 5 | Taking down old UNSV ,Supply testing installation ,commissioning ofthe Air Blower of capacity 7,5 HP, Gear oil servo , grease HP -T150NAoil seal, rollerbearing NU-307, angular contact, ball bearing, sleeves , air filterall as per existing complete all as specified and directed by Engineer in Charge. AV |
| 6 | Taking down old UNSV , Supply install testingand commissioning of submersible sewage pumpset/motor non clog type of capacity 2 HPmotorincluding suitable size of suction & delivery pipe ,connected valvesconnectionsincluding necessary electrical connections from starter to motor with suitable sizecablecomplete all as specified and directed(VV) |
| 7 | Taking down old UNSV , Supply install testingand commissioning of electric motor coupled with submersible sewage pumpset non clog type of capacity 7.5 HP KWmotorincluding suitable size of suction & delivery pipe ,connected valves including necessary electrical connections from starter to motor with suitable size submersible cable complete all as specified and directed ( VV) |
| 8 | Taking down old unserviceable , Supply install test and commissioning ofcentrifugual pump,motor of capacity 3 HPincluding suitable size of suction & delivery pipe, connected valvesincluding necessary electrical connections from starter to motor with suitable size cable complete all as specified and directed cable with suitable PCC foundation(VV) |
| 9 | Taking down old unserviceable , Supply install test and commissioning ofcentrifugual pump,motor of capacity 2 HPincluding suitable size of suction & delivery pipe ,connected valves including necessary electrical connections from starter to motor with suitable size cable with suitable PCC foundation complete all as specified and directed AV |
| 10 | Taking down unserviceable pressure guage from position and Material and labour for pressure guage 4\" dia, 0-21 Kg/cm2 rating complete all as specified and directed. |
| 11 | Taking down old ,Supply ,fixing ofbutter fly valve 50mm dia complete all as specified and directed |
| 12 | Taking down old ,Supply ,fixing ofbutter fly valve 80mm dia complete all as specified and directed |
| 13 | Taking down old Supply and fix butterflyValve 100mm diacast copper alloy screwed down high pressure with iron wheel screwed both sides for iron pipe confirming to IS 13095 andfixed complete all as specified and directed |
| 14 | Taking down old Supply and fix butterflyValve 150mm diacast copper alloy screwed down high pressure with iron wheel screwed both sides for iron pipe confirming to IS 13096 andfixed complete all as specified and directed |
| 15 | Takingunserviceable tube settler mediaSupply fixing of tube settler media complete all as specified and directed. |
| 16 | Cleaning the surroundings of STP/SPH area by cutting/lifting the bushes, cutting and uprooting grass, vegetation shrubs, bushwood undergrowth, roots and trees not exceeding 30 cm girth (upto 01 metre height above ground level) and removing rubbish to a distance upto 50 metres outside the periphery of the area, complete all as specified and as directed. |
| 17 | Taking down unserviceable ,Supply and fix PVC insulated & PVC sheathed industrial copper cable forsubmersible/centrifugualpump motors, flat three core of nominal area of conductor 4 sqmm, 1100 Volts, conforming to IS: 694 including taking down old U/S cable complete all as specified and directed. |
| 18 | Taking down unserviceable ,Supply and fix PVC insulated & PVC sheathed industrial copper cable for submersible p submersible/centrifugual pump motors, flat three core of nominal area of conductor 6 sqmm, 1100 Volts, conforming to IS: 695 including taking down old U/S cable complete all as specified and directed. |
| 19 | Taking down unserviceable ,Supply and fix PVC insulated & PVC sheathed industrial copper cable for submersible pump motors, flat three core of nominal area of conductor 10 sqmm, 1100 Volts, conforming to IS: 696complete all as specified and directed. |
| 20 | Material and labour forPreparation of oldsteel surfaces of any description over 10cm in width or girth applying onecoat of synthetic enamel paintover one coat of red oxide primer complete all as specified and directed. |
| 21 | Removing of dewatered semi dry sludge cake manually without disturbing the bed of sludge pit 02 Nos of size each 8.0m x 5.5m x 0.40m and depositing outside Akash Vihar complete all as specified and as directed. |
| 22 | Material and labour for Cleaning the following RCC chambers IN STPAkash Viharby removing the sludge/ sediments from the bottom, Taking out dirt and sludge with sludge machine and disposing the same to a safe distance, scrubbing the internal walls/floor with industrial vaccum cleaner complete all as specified and as directed.(i) Manual bar screen of size 0.9 m length x 2.1 m wide x 3.00 m depth.(ii) Oil grease trap 02 Nos 2 m length x 1.8 m wide x 3 m depth and 2 m length x 1.94 m wide x 3m depth.(iii) Receiving sump 4.1 x 4.2 x4.5Mtr.(iv) Fab System 6.0 x 6.0 x3.5Mtr.(v) Tube settler 3.3 x 3.3 x3.5Mtr. (vi) Chlorine contact tank 1.7 x 3.6 x2.5 Mtr. (vii)Treated water storage tank 3.5 x 3.5 x 2.5 Mtr. |
| 23 | Taking down Old Dosing system ,Supply dozing system pf capacity motor:0.5 H,1440 rpm,415 Volts 50 Hzhaving features leakages free pump,as it has low maintenance needs,excellent proportional control & injection frequency ,Liquid end made from rigid PP/FPC,can be able to hand slurries ,shear sensitive and aggressive fluid and cause no clogging,150 Ltrs cap hooper bootom FRP construcconstruction solution,pump maximum pressure 10 Kg/cm2 ,prevents backflow and shipping withot valves,self priming and continous dosing ,preparation cum storage tank with level gauge water,facilitate with part hole ,pump mounting facility on MS frame,inlet ,solution outlet and sludge drain connection ,dosing rate upto 25 LPH,dosing can be done to multiple lines ,combined gear & motor assembly with agitator in one motor,agitator with ss sweep blade duly FRP coated, complete all as specified and directed.Note :Old dozing system nust be deposited to MES store |
| 24 | Taking out u/s plastic media, Material and labour for new plastic media insystem as per existing media complete all as specified and as directed. |
| 25 | Material and labour for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified and as directed.NOTE: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point.(ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber. |
| 26 | Cleaning of sewage intake circular chamber of size upto 6 metre dia and upto 4 metre depth by removing the sludge manually/pumping and depositing outside the camp area complete all as specified and as directed. |
| 27 | Rolled mild steel as in heavy bracket framing (beam,tee, angle, channel or flat sections) including distance pieces etc fe-290, Grade-E-165 completeall as specifed and as directed. |
| 28 | Galvanised corrugated mild steel sheeting, 0.63mm thick, with twocoorugations side lap , fixed with coach screws and washers, in roofs , walls, hangers doors etc. with grade ofb zinc coating 275, complete all as specified and as directed. |
| 29 | Disconnection and removing the unserviceable Automatic star/delta starter and S & F Automatic star/delta starterinSS enclosure with relay max range 13 to 21 Amps, 415V/440V and 3 Nos of Power Contactors of capacity 32 Amps, Prewired with ON/OFF Buttons complete including connecting the cable complete all as specified and as directed. |
| 30 | Disconnection and removing the unserviceable Automatic star/delta starter and S & F Automatic star/delta starterinSS enclosure with relay max range 20 to 32 Amps, 415V/440V and 3 Nos of Power Contactors of capacity 40 Amps, Prewired with ON/OFF Buttons complete including connecting the cable complete all as specified and as directed. |
| 31 | Disconnection and removing the unserviceable Automatic star/delta starter and S & F Automatic star/delta starterinSS enclosure with relay max range 28 to 42 Amps, 415V/440V and 3 Nos of Power Contactors of capacity 42 Amps, Prewired with ON/OFF Buttons complete including connecting the cable complete all as specified and as directed. |
| 32 | Disconnection and removing the unserviceable DOL starter and S & F DOL starterType - MK1, 15A, 3 Phase, 50 Cycles, Relay Range upto 9 - 14A, 415V/440V including connecting the cable complete all as specified and as directed. |
| 33 | Removing of dewatered semi dry sludge cake from drying bed8.0 X4 X 1.2 mtr and depositing at a distance not more than 50 mtrs etc at STP Vishwa Vihar completeall as specified and directed. |
| 34 | Cleaning the following tanks of sizes as mentioned at STP Vishwa Viharwith bleaching powder and sodium hydro chloride and taking out the stagnated slurry away from site complete all as specified and as directed. :- (a) Collection tank of size 10x5x2.5 mtrs (02 Nos) (b) Manhole chambers of size 2x2x1.5 m (05 Nos) (c) Equalisation tank 3x2x4 mtrs (01 No)(d) Aeration tank of size 5x4x3.5 mtrs (02 Nos). (e) Clarifier dia 3.5 mtrs depth 3 mtrs (01 No) (f) Clear water tank 6x5x3.5 mtrs (02 Nos) (g) Under ground treated water tank 4x4x4 mtrs (01No) |
| 35 | Supply and lay LT under ground cable XLPE insulated armoured heavy duty 1100V grade stranded with aluminum conductor of size 185 Sqmm 3.5 core,in trenches including taking down old unserviceable cable. complete all as specfied and directed. |
| 36 | Supply and lay LT under ground cable XLPE insulated armoured heavy duty 1100V grade stranded with aluminum conductor of size 120 Sqmm 3.5 core,in trenches including taking down old unserviceable cable. complete all as specfied and directed. |
| 37 | Supply and lay LT under ground cable XLPE insulated armoured heavy duty 1100V grade stranded with aluminum conductor of size 70 Sqmm 3.5 core,in trenches including taking down old unserviceable cable. complete all as specfied and directed. |
| 38 | Supply, and laying in trenches cableXLPE insulated , armoured electric cable with aluminium conductor 1100 volts grade cross sectional area10 Sqmm 4 core. complete all as specified and as directed. |
| 39 | Supplyerect Steel steel tubular swaged pole complete with cast irob base plate,final taper plug bolts nuts& screw as specified type 410 SP -31 (9.00 mtrs long ) complete all as specified and directed .Note :Coping will be measured and paid separately . |
| 40 | S&F high efficient LED street light fitting of 70 W 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistantcomplete all as specified. |
| 41 | Supply and fix in repair PVC weather proofjunction box with hinged door locking arrangement and consisting of01 No panel mounted connector 4 pole 6A -MCB 1 No, with suitable size flanged type brass cable entry glands confirming to IP 65 complete including necessary fixing arrangement on street light pole complete all as specified and as directed. |
| 42 | M & L for street light bracketmade upto 50 mm GI tubing medium grade upto 1.5mtr long including bending,welding ,drilling holes as required and fixing with flat MS clamps 25x5mm thick (02nos) with suitable nut,bolts and washers to steel tubular/concrete poles/wall complete all as specified and as directed. |
| 43 | Material and labour for submain wiring on Street light poles complete (from PVC junction box to light fitting) with 2 runs of single core, PVC insulated cable of size 1.5 sqmm 1100 volts grade, unsheathed copper conductor multistranded drawn into and including PVC conduit 20 mm dia and conduit accessories alongwith one run of earth continuity conductor of size 1sqmm complete allas specified and as directed. Note: Two runs of 1.5 sqmm cable, one run of 1sqmm cable for earth continuty and one run of PVC conduit and conduit accessories will be measured and paid as one unit. |
| 44 | Taking old,Supply intallation,testing and commissioning of LT pannel board Indoor type floor mounted made out of 2 mm thick CRCA sheet mounted on frame angle iron of suitable weather proof/veermix proof shutter type with locking arrangement of cubical type prewired with aluminium busbar 500 Amps for 03 phases and aluminium busbar 500 Amps for neutral including suitable CTs etc and powder coating painting, angle iron frame base 75 x 75 x 6mm for accommodating the undermentioned MCCBs alongwith extendable bus bars with 2 Nos of earth bus bar made out of 32 x 6mm GI strip complete all as specified and as directed Digital type Ammeter 0-60 Amps capacity with CTs and rotator switch - 01 NoDigital type Voltmeter 0 - 500 volts capacity alongwith selector switch- 01 NoIndicating Lamps R, Y, B set of 03 Nos - 01 SetSelector switchs 4 Pole MCCB350 Amp 50 Hz 415 V (Incoming)-013 Pole MCCB63 Amp 50 Hz 415 V -06 Nos3 Pole MCCB40 Amp 50 Hz 415 V-06 Nos3 Pole MCCB25 Amp 50 Hz 416 V-02 Nos Time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure-01 Nos |
| 45 | .Taking Old ,M&L for new Earthing complete with galvanized earth plate60cm x 60cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 Metre, deep below ground level)with top edge of the plate not less than 1.5 m below normal ground level connectedto 32 x 6mm GIearth strip by means of bolts, nuts, washers, check nuts of galvanisediron or steel all as specified or indicated including excavation and earth work PCC 1:2:4 type B-1(using 20 mm graded aggregate) in chamber RCC cover 40mm thick in 1:2:4 type B-1 (20mm graded aggregate) with 8 mm MS rod as 15cm in both ways with hooks, funnels with watering pipe, wire mesh and ,GI protection pipe and testing on completion. complete all as specified and as directed. |
| 46 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft loosesoil for laying of cables, and foundation for poles and stay complete all as specified and as directed. |
| 47 | Returning, filling in including spreading leveling, watering and well ramming in layers n. exc 25 cms in hard/dense soil. complete all as specified and as directed. |
| 48 | Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. complete all as specified and as directed. |
| 49 | Supply and lay River sand in trenches for cushioningof underground cable/fitting of cable ducts complete all as specified and as directed. Note: Only punned thickness of sand shall be measured for payment purpose |
| 50 | Unreinforced pre cast concrete cable cover class LV type 1 flat size 250 x 150 x40 mm of cable protection complete all as specified and as directed. |
| 51 | Supply and lay GI tubing light grade, 50 mm diain trenches for road crossing/laid in floors etc. complete all as specified and as directed. |
| 52 | PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation complete all as specified and as directed. |
| 53 | PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including necessary formwork exposed surface of concrete shall be finished even and smooth without using extra cement complete all as specified and as directed |
| 54 | PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation complete all as specified and as directed. |
| 55 | Taking down Old GI Pipe ,Supply ,fixing,laying and commissioning of3 layer PP-R polypropylene random copolymer cocealed pipes SDR 7.4 (PN1 6) UV stabilized having dia 110 mm having antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polyprpropylene random fittings laid in trenches complete all as specified as directed |
| 56 | Taking down Old GI Pipe ,Supply ,fixing,laying and commissioning of3 layer PP-R polypropylene random copolymer cocealed pipes SDR 7.4 (PN1 6) UV stabilized having dia 63 mm having antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polyprpropylene random fittings laid in trenches complete all as specified as directed |
| 57 | Taking down Old GI Pipe ,Supply ,fixing,laying and commissioning of3 layer PP-R polypropylene random copolymer cocealed pipes SDR 7.4 (PN1 6) UV stabilized having dia 50 mm having antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polyprpropylene random fittings laid in trenches complete all as specified as directed |
| 58 | Taking downOld GI PipeSupply ,fixing,laying and commissioning of3 layer PP-R polypropylene random copolymer cocealed pipes SDR 7.4 (PN1 6) UV stabilized having dia 25 mm having antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polyprpropylene random fittings laid in trenches complete all as specified as directed |
| 59 | Taking down Old GI Pipe Supply ,fixing,laying and commissioning of3 layer PP-R polypropylene random copolymer cocealed pipes SDR 7.4 (PN1 6) UV stabilized having dia 20 mm having antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polyprpropylene random fittings laid in trenches complete all as specified as directed |
| 60 | Taking downOld GI Supply anf fixing PP-R gate valve of dia 110 mm including fittings,brass insertcomplete all as specified and as directed . |
| 61 | Taking downOld GI Supply anf fixing PP-R gate valve of dia 63 mm including fittings,brass insertcomplete all as specified and as directed . |
| 62 | Taking downOld GI Supply anf fixing PP-R gate valve of dia 50 mm including fittings,brass insertcomplete all as specified and as directed . |
| 63 | Taking down Old GI Supply anf fixing PP-R ball valve of dia 20 mm including fittings,brass insertcomplete all as specified and as directed . |
| 64 | Supply and fixing Non Return Sluice Valve 80mm dia including fittings complete all as specified and as directed . |
| 65 | Taking down S & F Pipes galvanised medium class supplied and laid in trenches/walls/floors complete with all fittings such as tees/Lbows/Bends/Unions/Reducers/Sockets/ etc of following sizes complete all as specified and as directed.(a) Size 80 mm dia bore |
| 66 | (b) Size 50 mm dia bore |
| 67 | (c) Size 25 mm dia bore |
| 68 | (d) Size 15 mm dia bore |
| 69 | M&L for construction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation, 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made out of 3mm thick MS sheet duly welded with provision of hinges, handle and locking arrangement including 40 x 40 x 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, applying two coats of anti-corrosive paint over a coat of red oxide, zinc chrome primer after preparation of steel & iron surfaces including necessary excavation &earth work in hard/dense soil complete all as specified and as directed. |
| 70 | M&L for construction of brick masonry valve pit of size 60 cm x 60 cm x 60 cm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation, 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made out of 3mm thick MS sheet duly welded with provision of hinges, handle and locking arrangement including 40 x 40 x 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, applying two coats of anti-corrosive paint over a coat of red oxide, zinc chrome primer after preparation of steel & iron surfaces including necessary excavation &earth work in hard/dense soil complete all as specified and as directed. |
| 71 | Demolition of cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed. |
| 72 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed. |
| 73 | M & Lcement concrete type D-2, 1:4:8, using 40mm graded aggregate as infoundations, fillings and mass concrete. complete all as specified and as directed. |
| 74 | M&L for sand cushioning including watering for floor and Interlocking tiles fomplete complete all as specified and as directed. |
| 75 | M&L for machine pressed precast conctete with pigment coloured interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and directed. |
| 76 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 77 | M&L for painting concrete surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel (ordinary tint) paints over a coat of priming paint including preparation of new or previously untreated surfaces complete all as specified and as directed. |
| 78 | Demolition of cement concrete (un-reinforced) of any description on roofs, floors (other than ground floors), beams, staircases, landings, chajja & similar work including existing roof treatment if any complete all as specified and as directed. |
| 79 | Demolition of concrete(reinforced) of any description and in any position not otherwise speifically provided. complete all as specified and as directed. |
| 80 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 81 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 82 | M & L for 100 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 83 | M&L Glass dividing strips, 3 mm thick and width of strip 38 mm complete all as specified and as directed. |
| 84 | Material and Labour for PCC (1:2:4) type B1 using20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throatingetc. including necessary form work complete all as specified and as directed. |
| 85 | Providing precast cement concrete in window or doorcills, lintels,bressumers, steps,quoin blocks (foruse with masonry), stringcourses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders(for stone walling).corbels, brackets,etc. (of any section indicated), withplain fair faces, including chamfers, weatherings, throating etc.in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces andsetting in mortar complete with joints to match in cement mortar 1:6 complete all as specified and as directed. |
| 86 | M&L Brickwork with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius, built in in cement mortar 1:4 complete all as specified and as directed. |
| 87 | M&L for Except bricks Brick work with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius, built in in cement mortar 1:4 complete all as specified and as directed. |
| 88 | M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed. |
| 89 | M&L for Rendering 10mm thick on fair face of concrete surfaces in CM 1:3 with WPC as specified finishing even and smooth with out using extre cement. complete all as specified and as directed. Note: WPC shall be measured and paid separately. |
| 90 | Supply only integral water proofing complete all as specified and as directed. |
| 91 | M&L for drilling hole, inserting injection nozzle of suitable size and injecting grouting material into cracks with a pressure of 40 PSI mechanicaly including the sealing hole complete all as specificed and directed.Note: Grouting material measured and paid separately as supply only. |
| 92 | Supply only of Low Viscous Epoxy based injection grouting material \" Conbextra EP10\" of fosroc or Equivallent make complete all as specified and as directed. |
| 93 | M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken bricks complete all as specified and as directed. |
| 94 | M & L for sand filling for filter beds in layers n. exc 30cm thick, including watering and consolidation complete all as specified and as directed. |
| 95 | M & L for two coats of synthetic enamel paint for over a coat of primer incl preparation of new steel surfaces not otherwise described, over 10cm width or girth. complete all as specified and as directed. |
| 96 | M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paintcomplete all as specified and as directed. |
| 97 | M & L for two coats of cement based paint on newly plastered cement painted walls, pillasters, cornices, etc., including necessary preparation of surfaces complete all as specified and as directed. |
| 98 | M & L Rendering in CM 1:6 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 99 | M&L TMT mild steel bar 10mmdiaand over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 100 | M&L TMT mild steel bar but 6mm to 8mm dia. cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 101 | DismantlingBarbed wirefencingof any type complete all as specified and as directed. |
| 102 | Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc andmaking good disturbed ground incl barbed wire complete all as specified and directed . |
| 103 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard or dence soil complete all as specified and as directed. |
| 104 | M & L for PlainCement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in Post holes,foundations, filling and mass concrete complete all as specified and as directed. |
| 105 | S&F for posts and struts in fencing including embedding in concrete and screwing etc. including securing bolts;cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0. complete all as specified and as directed. |
| 106 | Supply only Chain link MS galvanised fencing, of any size or type. complete all as specified and as directed. |
| 107 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and as directed. |
| 108 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 109 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed. |
