|
| 1 | SCHEDULE \"A\" PART-I: LIST OF WORKS |
| 2 | Removal of existing broken/unserviceable front leg of chair dining and replacing the same withnew front leg of 1st class hard wood (Teak) (size and dimension of the replaced parts shall be of the same pattern/size as shown in drawings and specifications)and applying two coats of french polish to all replaced parts to match with existingcomplete all as specified and directed[FD-279, 228 & 203] Note:- All furniture repairs shall be carried out at various units / BSO yard as per the direction of Engineer-in-charge. Quoted rate shall bedeemed to be inclusive of all subsequent expenditure occured on carrying out repairs at various sites/locations and nothing extra on account of any misunderstanding or otherwise on this account shall be admissible |
| 3 | All as per Item No.1 above but replacing the rear leg of Chair Dining[FD-279, 228 & 203] |
| 4 | All as per Item No.1 above but replacing the back rest of Chair Dining[FD-279, 228 & 203]. |
| 5 | All as per Item No.1 above but replacing the front/side/back rail of Chair Dining. [FD-279, 228 & 203] |
| 6 | All as per Item No.1 above but replacing the bottom stiffener of Chair Dining.[FD-279, 228 & 203] |
| 7 | Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair dining completeall as shown in drawings and as specified. [FD-279, 228 & 203] |
| 8 | M & L for fixing MS right angle of size 50X25X5mm thick on any one corner of chair dining by screwing to side rail and leg of chair all as specified and as directed by Engr-in-Charge. [FD-279, 228 & 203] |
| 9 | M & L for preparation of old treated wooden surfaces of chair dining as per drawing No FD-16/227/260/279 and applying two coats of french polish complete all as specified and directed. |
| 10 | M&L for removal of existing broken / unserviceable front /back/ side rail of Chair dining cushioned, replacing the same with new teak wood front/back/side rail, size &dimension of the parts shall be of the same pattern/size as shown in drawing and specification,fixed to main frame and legs of chair dining cushionedand apply two coats of french polish to all replaced parts to match with existing complete all as specified and directed [FD/E6/MAP/10/10(R)] |
| 11 | All as per Item No.9 above but replacing the front leg of chair dinning cushioned [FD/E6/MAP/10] |
| 12 | All as per Item No.9 above but replacing the back stiffener of chair dinning cushioned [FD/E6/MAP/10] |
| 13 | M&L for removal of old unserviceable seat of chair dining cushioned and fixing new cushion of 75mm thick, 32 density foam seat,covered with fabric of approved colour fixed to 12mm thickBWR commercial plywood seat of Chair Dining cushioned complete all as specified and directed [FD/E6/MAP/10/10(R)] |
| 14 | Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair dining cushioned as shown in drawing and as specified. [FD/E6/MAP/10/10(R)] |
| 15 | M & L for fixing MS right angle of size 50X25X5mm thick on any one corner of chair dining cushioned by screwing to side rail and leg of chair all as directed and as specified [FD/E6/MAP/10/10(R)] |
| 16 | M & L for preparation of old treated wooden surfaces of chair dining cushioned as per drawing No [FD/E6/MAP/10/10(R)] and applying two coats of french polish complete all as specified and directed. |
| 17 | M & L for removal of existing broken / unserviceable front /back/ side rail of Chair dining JCO/OR, replacing the same with new teak wood front/back/side rail , size &dimension of the parts shall be of the same pattern/size as shown in drawing and specifications and fixed to main frame and legs of Chair dining JCO/OR and applying two coats of french polich to all replaced parts to match with existingall as specified and directed [FD/MAP-II/05] |
| 18 | All as per Item No.16 above but replacing the front leg of chair dinning JCO/OR[FD/MAP-II/05] |
| 19 | All as per Item No.16 above but replacing the Rear leg of chair dinning JCO/OR[FD/MAP-II/05] |
| 20 | All as per Item No.16 above but replacing the back rest/bend stiffener of chair dinning JCO/OR[FD/MAP-II/05] |
| 21 | All as per Item No.16 above but replacing the bottom stiffener of chair dinning JCO/OR[FD/MAP-II/05] |
| 22 | M&L for stiffener made out of25 x 25 mm 1st class hard wood (Teak) having a length of 430 mm under PVC seat to sustain weight applied to chair dining by fixing horizontally between top of two side rails of chair dining suitable for fixing PVC seat over new stiffner and all exposed surfaces of replaced parts duly french polished complete all as specified and directed (FD/MAP-II/05). |
| 23 | M&L for removal of old unserviceable broken PVC seat of chair dining JCO /ORand fix new PVC seat of make AMCO or equalent in Chair Dining JCO/OR complete all as specified and directed (FD/MAP-II/05). |
| 24 | Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair Dining JCO/OR as shown in drawing (FD/MAP-II/05) |
| 25 | M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair Dining JCO/OR by screwing to side rail and leg of Chair all as specified and directed (FD/MAP-II/05). |
| 26 | M & L preparation of old treated wooden surfaces of Chair Dining JCO/OR and applying two coats of french polish complete all asspecified and directed. (FD/MAP-II/05) |
| 27 | Removal of existing broken/unserviceable front leg of chair writing, replacing the same withnew front leg 1st class hard wood (Teak), size &dimension of the parts shall be of the same pattern/size as shown in drawing as well as specificationand apply two coats of french polich to all replaced parts to match with existing all as specified and directed (FD-280/250) |
| 28 | All as per item No. 26 above but replacing rear leg of chair writing (FD-280/250) |
| 29 | All as per item No. 26 above but replacing back rest of chair writing (FD-280/250) |
| 30 | All as per item No. 26 above but replacing arm rest of chair writing (FD-280/250) |
| 31 | All as per item No. 26 above but replacing bottom stiffner of chair writing (FD-280/250) |
| 32 | All as per item No. 26 above but replacing front / back/side rail of chair writing (FD-280/250) |
| 33 | Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair writing complete all as shown in drawing and as specified (FD-280/250) |
| 34 | M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair writing by screwing to side rail and leg of Chair all as specified and directed by Engr in charge (FD-280/250). |
| 35 | M & L preparation of old treated wooden surfaces of Chair Writing and applying two coats of french polish complete all asspecified and directed. (FD/280/250) |
| 36 | Removal of existing broken/unserviceable front leg of Chair wooden bottom without arms , replacing the same withnew front leg 1st class hard wood (Teak), size &dimension of the parts shall be of the same pattern/size as shown in drawing as well as specificationand applying two coats of french polich to all replaced parts to match with existing all as specified and directed (FD-285 & 225) |
| 37 | All as per item No. 35 above but replacing rear leg of Chair wooden bottom without arms. (FD-285 & 225) |
| 38 | All as per item No. 35 above but replacing back rest of Chair wooden bottom without arms. (FD-285 & 225) |
| 39 | All as per item No. 35 above but replacing front/rear/side rail of Chair wooden bottom without arms. (FD-285 & 225) |
| 40 | All as per item No. 35 above but replacing stiffner of Chair wooden bottom without arms. (FD-285 & 225) |
| 41 | Removal ofexisting broken / unserviceable plywood seat of chair wooden bottom without arms and replacing the same with new one side teak wood plywood seat 6mm thick fixed to bottom frame of the seat with steel screws @ 75mm C/C complete all as shown on drg and as specified. (FD-285 & 225) |
| 42 | Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair wooden bottom as shown in drawing and as specified (FD-285/225) |
| 43 | M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair wooden bottom by screwing to side rail and leg of Chair all as specified and directed (FD-285/225) |
| 44 | M & L for preparation of old treated wooden surfaces of Chair wooden bottom and applying two coats of french polish complete all asspecified and directed. (FD/285/225) |
| 45 | Removal of existing broken/unserviceable front/rear leg of Chair easy and replacing the same withnew front/rear leg 1st class hard wood (Teak), size &dimension of the parts shall be of the same pattern/size as shown in drawing as well as specificationand applying two coats of french polish to all replaced parts to match with existing all as specified and directed (FD-229 & 201) |
| 46 | All as per item No. 44 above but replacing arm rest of Chair easy (FD-229 & 201) |
| 47 | All as per item No. 44 above but replacing front/rear/back rail of seat frame of Chair easy (FD-229 & 201) |
| 48 | All as per item No. 44 above but replacing top / bottom/side rail of back rest frame of Chair easy (FD-229 & 201) |
| 49 | M&L for removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair easy as shown in drawing (FD-229/201) |
| 50 | M&L for fixing wooden right angle corner bracket of size 75x25 mm thick on any one corner of Chair easy by screwing to side rail and leg of Chair all as directed (FD-229/201) |
| 51 | M & L preparation of old treated wooden surfaces of Chair Easy and applying two coats of french polish complete all asspecified. (FD/229/201) |
| 52 | Removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0 mm thick and of size 380 x 760 mm and fixing on the existing frameall as shown on drg and as specified. FD -230 |
| 53 | M&L for removal of old broken plywood back of mirror of Table dressing gents and replacing the same with new 6 mm plywood BWR, fixing to the existing frame alongwith 35x25 mm wooden beading alroundall as shown on drg and as specified. FD -230 |
| 54 | M&L for removal of old broken particle board top/bottom of Table dressing gents drawer and replacing the same with 18 mm prelaminated particle board of size 900x300 of same colour & texture of exisiting item complete all as shown on drg and as specified. FD -230 |
| 55 | M&L for removal of old broken drawer of Table dressing gents and replacing the same with drawer of size 340x300 mm fixed to existing frame all as shown on drg and as specified. FD -230 |
| 56 | S&F MS knob chromium plated 30 mm to drawer of table dressing Gents complete all as shown in drawings and as specified (FD-230) |
| 57 | M & L preparation of old treated wooden surfaces of Table dressing Gents and applying two coats of french polish complete all asspecified and as directed. (FD/230) |
| 58 | M&L for removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0 mm thick and of size 1200x600 mm and fixing on the existing frameall as shown on drg and as specified. (FD/E6/MAP/16) |
| 59 | M&L for removal of old broken plywood back of mirror of Table dressing gents and replacing the same with new 6 mm BWR plywood fixing to the existing frame all as shown on drg and as specified. FD/E6/MAP/16 |
| 60 | S & F glass shelves of size 100x600x5 mm thick for Table dressing Gents complete all as specified and directed. (FD/E6/MAP/16) |
| 61 | Removal of old broken leg of Table dressing gents and replacing the same with new 38x38x338 mm legin 1st class hard wood (Teak) and 38x112x112 mm wooden bracket on top of leg fixing one side to wooden frame of mirror and other side to leg complete all as shown on drg and as specified. (FD/E6/MAP/16) |
| 62 | M & L for preparation of old treated wooden surfaces of Table dressing Gents and applying two coats of french polish complete all asspecified. (FD/E6/MAP/16) |
| 63 | M&L for removal of existing foggy/broken mirror of Table dressing Ladies and replacing the same with new mirror not less than 5.0 mm thick and of size 366 x 1220 mm and fixing on the existing frameall as shown on drg and as specified. FD - 251/378 |
| 64 | M&L for removal of old broken plywood back of mirror of Table dressing Ladies and replacing the same with new 6 mm BWR plywood fixing to the existing frame alongwith 35x25 mm wooden beading alroundall as shown on drg and as specified. FD -251/378 |
| 65 | M&L for removal of old broken drawer of Table dressing Ladies and replacing the same with drawer of sizeas shown on drg and as specified. FD -251/378 |
| 66 | M&L for removal of old broken glass door of Table dressing Ladies and replacing the same with glass door of size 5 mm thick of size as shown on drg and as specified. FD -251/378 |
| 67 | M&L for removal of old unserviceable aluminium channel of Table dressing Ladies and replacing the same with suitable size as shown on drg and as specified. FD -251/378 |
| 68 | S&F MS knob chromium plated 30 mm to drawer of Table dressing Ladies all as shown in drawing and as directed (FD-251/378) |
| 69 | M&L for removing existing broken / unserviceable leg of Table dressing Ladies replacing the same with new leg Ist class hardwood (Teak) of size & dimention of the parts shall be of the same pattern / size as shown in drawing as well as specified and apply two coats of french polish to all replaced parts to match with exisitng all as specfied and directed (FD-251/378) |
| 70 | M & L for preparation of old treated wooden surfaces of Table dressing Ladies and applying two coats of french polish complete all asspecified and directed. (FD-251/378) |
| 71 | M&L for removal of existing foggy/broken mirror of Table dressing Ladies and replacing the same with new mirror not less than 5.0 mm thick and of size 430 x 1230 mm and fixing on the existing frameall as shown on drg and as specified. FD/E6/MAP II/07 |
| 72 | M&L for removal of old broken plywood back of mirror of Table dressing Ladies and replacing the same with new 6 mm BWR plywood fixing to the existing frame alongwith 25x20 mm wooden beading alroundall as shown on drg and as specified. FD/E6/MAP II/07 |
| 73 | M&L for removal of seat cushion of Table dressing Ladies with mirror (FD/E6/MAP II/07 and supply and fixing new foam cushion 75 mm thick having 32 density over 12 mm thick commercial plywood seat base. The foam cushion shall be duly stitched with tapestry cloth, cost of tapectry cloth used in the work shall be of not less than 350/- per meter and color, quality and design shall be approved by the GE complete all as shown in drg and as specified (FD/E6/MAP II/07) |
| 74 | M&L for removing old broken particle board top/side/bottom of table dressing ladies with mirror and replacing with 18 mm particle board exterior grade top/side/bottom drawer of Table dressing ladies with mirror all as shown in drg and as specified (FD/E6/MAP II/07) |
| 75 | S&F MS knob chromium plated 30 mm to drawer of Table dressing Ladies all as shown in drawing and as specified (FD/E6/MAP II/07) |
| 76 | M&L for removal of old broken drawer of Table dressing Ladies and replacing the same with drawer of sizeas shown on drg and as specified. (FD/E6/MAP II/07) |
| 77 | M & L preparation of old treated wooden surfaces of Table dressing Ladies and applying two coats of french polish complete all asspecified and directed. (FD/MAP-II/07) |
| 78 | M & L for removing unserviceable and broken plastic cane and cleaning entire surface of the Chair Dining and recanning with new plastic cane ofsize 1.8x0.46mm and boarderwith 3.0x0.60mm size cane as per Godrej Pattern complete all as specified and directed.(FD-16/227/260/279) |
| 79 | All as per Sl item No.77 above, but for Chair Easy Seat only . FD-229 |
| 80 | All as per Sl item No.77 above, but for Chair Easy back only. FD-229 |
| 81 | All as per Sl item No. 77 above, but for Chair writing. FD-261/280 |
