|
| 1 | Dimantling doors or windos including chaukhats but excluding hold fast and including stacking of material as direction by the engineer - in - charge a distance of 60 metre |
| 2 | PCC in 1:4:8 (1 Cement : 4 coarse sand (zone-ill) derived from natural sources : 8 graded stone aggregate 40 mmnominal size derived from natural sources) all complete . |
| 3 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | 12 MM thick plaster on wall in 1 : 6 ( 1 cement , 6 course sand ) |
| 5 | SUPPLY & fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600*600 mm size in flooring and skiriting with 1;3 approved cement and coarse sand motor finished with in its cement colour slurry jointing and polished of approved quality complete/possition . |
| 6 | providing and laying in position Cement concrete 1:2:4(1 cement:2 Coarse sand:4 gradded stone aggregate 20 mm nominal size. |
| 7 | S/fixing 6mmchina white glazed tile in flooring or in skirting or dado with 1:3 cement and approved c/sand mortar finished with white cement slurry jointing and polishing in comp.position (s.i-628) |
| 8 | Scraping old white and colour wash including disposal of refuse as directed by the engineer-in-charge with thn a distance 60.0meter in comp.position (s.i-708) |
| 9 | providing wall putty on old surface with approvel quality material of berger /birla/or similar make 2 coat . |
| 10 | finishing wall with Acrylic smooth exterior paint of required shade new work (two or more coat applied). DSR 13.46.1 |
| 11 | Providing &fixing aluminium work for doors ,windows, ventilors &partitions with extruded boilt up standard tubular sections /appropriate z sections and other sections of approved make conforming to isi 733and is 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at juctions i.e at top ,bottom, and sides with required EPDM rubber /neoprene gasket etc . aluminium sections shall be smooth rust free strainght mitred and jointed mechanically wherever required including cleat angle ,aluminium snap beading for glazing /panelling c.p. brass /stainless steel screws all complete./possition. |
| 12 | Anodised aluminium (anodised transpart or dyed to required shade according to is 1868minimum anodic coating of grade ac 15 |
| 13 | power coated aluminium (minimum thickness of power coating 50 micron ) dsr 21.1.1.2 |
| 14 | pre -laminated particles board with decorative laminations on both side dsr 21.2.2 |
| 15 | with float glass panes of 4.0mm thickness (weight not less than 10 kg/sqm dsr 21.3.1 |
| 16 | wiring point for lights etc All complete. |
| 17 | wiring point for plugs All complete. |
| 18 | Supply and wiring of submain with two number of 2.5 sqmm copper conductor cable all complete . |
| 19 | painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coat on new work over an under coat of uitable shade with ordinary paint of approved brand and manufacture 2023 si no 13.61.1 |
| 20 | providing and fixing 25mm thick shulters for cup board . panelled or panelled & glazed shutters .second class teak wood including isi marked anodised aluminium bult hinges with necessary screws DSR 2023 S.I 19.16.1.1 |
| 21 | DESIGNING fabricating testing installing and fixing in position curtain wall with aluminium composite panel cladding with open grooves linear as well as curvlinears portion of the building for all height and all levels etc in complete possition . |
| 22 | Steel work in built up tubular (round squre or rectangular hollow tubes etc ) trusses etc including cutting hoisting fixing in possition and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc in complete/ possition Please Enable Macros to View BoQ information |
