|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 4 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 6 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 7 | 12 mm cement plaster of mix : |
| 8 | 1:6 (1 cement: 6 fine sand) |
| 9 | Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 fine sand) : |
| 10 | Flush / Ruled/ Struck or weathered pointing. |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 12 | Two or more coats on new work. |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 15 | Old work (one or more coats) |
| 16 | White washing with lime to give an even shade : |
| 17 | Old work (two or more coats) . |
| 18 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 20 | One or more coats on old work. |
| 21 | French spirit polishing : |
| 22 | One or more coats on old work. |
| 23 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 24 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 25 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 26 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 27 | Renewing glass panes and refixing existing wooden fillets: |
| 28 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 29 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 30 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 31 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge. |
| 32 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 33 | In cement mortar |
| 34 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 35 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 36 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 37 | 25 mm nominal bore |
| 38 | 20 mm nominal bore |
| 39 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : |
| 40 | 15 mm diameter pipe. |
| 41 | 20 mm diameter pipe. |
| 42 | 25 mm diameter pipe |
| 43 | Repairs to cement concrete / RCC surfaces in patches by suitably filling cement concrete 1:1:2 (1 cement : 1 coarse sand: 2 stone aggregate 10 mm nominal size) alround the exposed reinforcement and in cracks & potholes of depth 20mm to 40mm complete as per the direction of Engineer-in-charge. |
| 44 | Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day work at one site shall be taken as one job.) |
| 45 | Providing manual assistance for attending petty day-to-day maintenance services as & when required i/c all required T&P and scaffolding upto 6.0 M height etc. (Note: Minimum time shall be reckoned as half day even if the time required for doing the job is less than half a day and measured as one Job. Material required for maintenance shall be paid in relevant item) |
| 46 | Semi skilled manual Assistance |
| 47 | Unskilled manual Assistance |
| 48 | Credit of old rusted (unserviceable) C.I./S.C.I. Pipes and fittings, Mild Steel/ Steel Sections, G.I./M.S. Pipes, old steel window and grilletc. |
